{"v":1,"groups":["DNC","OTHER","TAPE","ANOTHER","BARRIER","CALL MACRO","FEED VEL.","MACHINE STRUCTURE","MEASURE","SPINDLE","TABLE","TIME CONST.","DISPLAY STRUCTURE","EIA/ISO","LINE/FACE/3D","POINT","SOFT LIMIT","SOLID","SYSTEM","TURNING","CMT"],"categories":["Data I/O","Machine","User"],"a":[[1,"EMERGENCY STOP","c"],[2,"EMERGENCY STOP","c"],[3,"EMERGENCY STOP","c"],[4,"CORRECTABLE ECC ERROR","c"],[5,"SYSTEM SOFTWARE ERROR","c"],[6,"REMOTE I/O ERROR","c"],[7,"SRAM MALFUNCTION","c"],[8,"RAM MALFUNCTION","c"],[9,"ABSOLUTE POSITION MALFUNCTION","c"],[10,"DETECTOR MALFUNCTION (Alarm No., Axis, )","c"],[11,"POSITION REFERENCE MALFUNCTION (Alarm No., Axis, )","c"],[12,"SERVO BATTERY WARNING (Alarm No., Axis, )","n"],[13,"PRE-PROCESSOR MALFUNCTION","c"],[21,"SYSTEM ERROR","c"],[22,"AMPLIFIER NOT EQUIPPED","c"],[25,"SAFE OPERATION SYSTEM ALARM","c"],[26,"SPINDLE SAFE OPER. SYSTEM ALARM","c"],[30,"POWER SUPPLY MALFUNCTION","c"],[31,"SERVO MALFUNCTION 1","c"],[32,"SERVO PARAMETER MALFUNCTION","c"],[33,"SERVO MALFUNCTION 2","c"],[34,"SERVO MALFUNCTION 3","c"],[35,"OVERLOAD","c"],[41,"SPINDLE MALFUNCTION 1","c"],[42,"SPINDLE PARAMETER MALFUNCTION","c"],[43,"SPINDLE MALFUNCTION 2","c"],[44,"SPINDLE MALFUNCTION 3","c"],[51,"E2ROM MALFUNCTION","n"],[52,"BATTERY ALARM","n"],[53,"NC TEMPERATURE WARNING (Note 1, Note 2, Note 3)","n"],[54,"DIO5V MALFUNCTION","c"],[55,"REMOTE I/O ERROR (Note 1, Note 2, )","c"],[56,"SYSTEM SOFTWARE CHECKING","c"],[57,"NO PLC","c"],[58,"CORRUPT PLC","c"],[59,"PLC STOPPED","c"],[60,"REMOTE I/O VER2.0 ERROR (System, station, )","c"],[61,"REMOTE I/O INITIALIZE ERROR (No., System, )","c"],[62,"RI/O ARBITRARY ALLOTMENT ERROR (No., Register number, )","c"],[63,"ARBITRARY ALLOTMENT PARACHK ERR (No., Register number, )","n"],[64,"HIGH SPEED DIO SETTING OVER (Threshold value, Number of excesses, )","c"],[65,"OVER VOLTAGE DETECT","n"],[66,"PARAMETER MALFUNCTION","c"],[67,"HI-SPEED SYNCTAP AXIS ALARM","c"],[68,"HI-SPEED SYNCTAP SPDL ALARM","c"],[71,"ILLEGAL SERVO PARAMETER","c"],[72,"SERVO WARNING","c"],[81,"ILLEGAL SPINDLE PARAMETER","c"],[82,"SPINDLE WARNING","c"],[98,"H/W SYSTEM DISAGREEMENT ERROR","c"],[101,"SOFT LIMIT (Axis, )","w"],[113,"OVER TRAVEL (Axis, )","c"],[121,"SP ROT. FLUCT. ACCEL. CLAMP","n"],[122,"SPINDLE ROT. FLUCTUATION N/A","c"],[123,"SP ROT. FLUCT. SETTING ERROR (Alarm No., )","c"],[124,"SP ROT. FLUCT. ILLEGAL COMMAND (Alarm No., )","c"],[125,"ILLEGAL AXIS EXISTS","c"],[126,"AXIS HAS NOT PASSED Z PHASE","c"],[127,"ILLEGAL DIR. FOR ORIGIN RETURN","c"],[128,"OUTSIDE INTERLOCK AXIS","c"],[129,"INSIDE INTERLOCK AXIS","c"],[130,"NO OPERATION MODE","c"],[131,"CUTTING FEED OVERRIDE SET AT 0","w"],[132,"FEEDRATE ZERO","w"],[133,"STOP SPINDLE","w"],[134,"SPINDLE ROTATION EXCEEDED","c"],[135,"BLOCK START INTERLOCK","w"],[136,"CUTTING BLOCK START INTERLOCK","w"],[137,"DYNAMIC COMPENSATION EXCEEDED","c"],[138,"CANNOT ROTATE TABLE","c"],[139,"PRE-INTERP ACCEL/DECEL ERROR","c"],[140,"ILLEGAL REFERENCE RETURN No.","w"],[141,"EXCESS SIMULTANEOUS ERROR","w"],[142,"NONE OR DUPLICATE OPERAT. MODE","w"],[143,"ILLEGAL HANDLE FEED AXIS","w"],[144,"ILLEGAL CYCLE START (Alarm No., )","c"],[145,"REQUIRE ABSOLUTE RECOVERY (Alarm No., )","w"],[146,"NOT AUTO MODE","w"],[147,"SHAPING AXIS TURNING ANGLE OVER (WNo., NNo., BNo.)","w"],[148,"CHUCK BARRIER (Note 1, Note 2, )","c"],[149,"TAILSTOCK BARRIER (Note, )","c"],[150,"WORK PIECE BARRIER","c"],[151,"NO TANDEM CONTROLLING OPTION","c"],[152,"ILLEGAL SYNCHRONIZED AXIS NAME","c"],[153,"TRANSFER/PUSH UNFINISHED","c"],[154,"ZERO RET. NOT ALLOWED (G58 MODE)","n"],[155,"BARRIER TURRET/TOOL HEAD (Note, )","c"],[156,"ILLEGAL MEASURING SENSOR SIGNAL","c"],[157,"MEASURED RESULT MALFUNCTION","c"],[158,"ILLEGAL COMMAND CROSS MACHINING","w"],[159,"CROSS MACHINING IMPOSSIBLE (Alarm No., )","c"],[160,"ILLEGAL NUMBER OF CROSS AXIS","c"],[161,"SUPERPOSITION CTRL IMPOSSIBLE (WNo., UNo., SNo.)","c"],[162,"ILLEGAL SUPERPOSITION PARAMETER (WNo., UNo., SNo.)","c"],[163,"BARRIER WORK (WNo., UNo., SNo.)","c"],[164,"ILLEGAL CMD SAFE OPER SYS ALARM","w"],[165,"CANNOT MAKE SAFE OPER SYS ACTIVE","n"],[166,"LOWER TURRET ALREADY ASSIGNED","c"],[167,"ILLEGAL OPER TOOL TIP PT CTRL","n"],[168,"ILLEGAL OPER 5X RADIUS COMP.","n"],[169,"ILLEGAL OPER.HIGH SMOOTHING CTR","n"],[170,"W AXIS THRUST FORCE ALARM","c"],[171,"ILLEGAL W AXIS COMMAND","c"],[172,"B AXIS NOT AVAILABLE","c"],[173,"2ND SPDL C AXIS NOT AVIALABLE","c"],[174,"2ND SPDL 1/10000 N/A","c"],[175,"TABLE UNBALANCE CHECK N/A","c"],[176,"CANNOT CHANGE TIME CONSTANT (System No., )","c"],[177,"ONE-TOUCH TUNING IMPOSSIBLE (System No., )","c"],[178,"INERTIA TOO LARGE (System No., )","c"],[179,"CANNOT AUTO MEASURE INERTIA (System No., )","c"],[180,"SYNCHRO TAP ILLEGAL COMMAND (WNo., UNo., SNo.)","c"],[181,"NO MDI DATA (System No., )","n"],[182,"CANNOT DETACH AXIS (Axis, UNo., SNo.)","c"],[183,"CANNOT MDI INTERRUPT","n"],[184,"ILLEGAL OPER IN G54.4 MODE","n"],[185,"ILLEGAL OPER IN G68.2 MODE","n"],[186,"W-THERMAL COMP. OVER LIMIT","n"],[187,"SET W-THERMAL COMP. TOOL LENGTH","n"],[188,"SET W-THERMAL COMP. REF. POINT","c"],[189,"ILLEGAL SPINDLE DIRECTION (WNo., UNo., )","c"],[191,"FILE SYSTEM I/O ERROR (Alarm No., )","c"],[192,"EXECUTION IMPOSSIBLE (WNo., UNo., SNo.)","c"],[193,"NO TOOL IN MAGAZINE (WNo., UNo., SNo.)","c"],[194,"NO TOOL DATA IN PROGRAM (WNo., UNo., SNo.)","c"],[195,"WRONG MEASURING DIRECTION","c"],[196,"WRONG MEASURING POINT","c"],[197,"UNREGISTERED HEAD DATA","c"],[198,"NO HEAD DATA","c"],[199,"DIVISION BY ZERO","c"],[200,"HYDRAULIC UNIT PRESSURE DOWN","c"],[201,"CHILLER MALFUNCTION","c"],[202,"AIR PRESSURE DOWN","c"],[203,"SPINDLE OIL PRESSURE DOWN","c"],[204,"SPINDLE OIL LOW","w"],[206,"SPINDLE LUB. CHILLER MALF.","c"],[207,"IRREGULAR SLIDEWAY OIL PRESSURE","c"],[208,"SLIDEWAY OIL LOW","w"],[212,"MAGAZINE DRUM MALFUNCTION","c"],[214,"ILLEGAL TOOL DESIGNATED","c"],[216,"TOOL UNCLAMP OK?","n"],[217,"THERMAL TRIP","c"],[219,"MAIN TRANSFORMER OVERHEAT","c"],[222,"AFC OVERLOAD","c"],[224,"ILLEGAL TOOL FOR TOOL LGTH MEAS","n"],[225,"TOOL LIFE OVER","c"],[226,"TOOL BREAKAGE","c"],[227,"SIMULTANEOUS M CODE OPERATION","w"],[228,"ILLEGAL M CODE","w"],[229,"INVALID SCREEN FOR CYCLE START","c"],[230,"ILLEGAL MMS UNIT","c"],[231,"EXTERNAL CONTROLLER ALARM","c"],[232,"DOOR LOCK UNIT MALFUNCTION","c"],[235,"MAGAZINE MANUAL INTERRUPT","n"],[237,"MAGAZINE DOOR OPENED","n"],[238,"AUTO TOOL CHANGE STOP","n"],[240,"OPERATION RESTART UNFINISHED","w"],[242,"SPINDLE ORIENT TIME OVER","c"],[253,"SKIP SENSOR MALFUNCTION","c"],[256,"TOOL CLAMP SENSOR MALFUNCTION","c"],[257,"TOOL UNCLAMP SENSOR MALFUNCTION","c"],[258,"ATC COVER SENSOR(OPEN) MALF.","w"],[259,"ATC COVER SENSOR(CLOSE) MALF.","w"],[262,"GEAR SENSOR(HIGH SPEED) MALF.","c"],[264,"GEAR SENSOR(LOW SPEED) MALF.","c"],[265,"NEUTRAL SENSOR MALFUNCTION","c"],[270,"X AXIS ORIGIN RETURN UNFINISH","n"],[271,"Y AXIS ORIGIN RETURN UNFINISH","n"],[272,"Z AXIS ORIGIN RETURN UNFINISH","n"],[274,"SPDL CANNOT ROT(UNCLAMPED TOOL)","w"],[276,"SPDL CANNOT ROT(ATC ARM POS)","n"],[278,"MPG SPECIAL MODE SELECT","n"],[279,"MPG WARNING","n"],[280,"NO ORIENT (UNCLAMPED TOOL)","n"],[282,"NO ORIENT (ATC ARM POS. ERROR)","n"],[283,"NOT UNCLAMPED (NOT STOP SPINDLE)","n"],[284,"NOT UNCLAMPED (SPDL ORI. UNFIN)","n"],[285,"NOT UNCLAMPED (NOT MANUAL MODE)","n"],[289,"NO TOOL LOAD(ARM/SFTER POS ERR)","n"],[291,"NO TOOL UNLOAD (TOOL IN MAG.)","n"],[292,"NO UNLOAD (ARM/SHIFTER POS ERR)","n"],[294,"NO TOOL SELECT (INCORRECT TNo.)","n"],[295,"NO TOOL SELECT(ARM/SFT POS ERR)","n"],[297,"NO SPINDLE START(GEAR POS ERR)","w"],[298,"NO SPINDLE ORIENT(GEAR POS ERR)","w"],[300,"BREAKER TRIP","c"],[301,"CHILLER UNIT MALFUNCTION","w"],[304,"HIGH PRESS. PUMP THERMAL TRIP","w"],[306,"SPINDLE INHIBIT","c"],[307,"MILL SPINDLE INHIBIT","c"],[309,"SPINDLE ORIENT TIM OVER","w"],[310,"SPINDLE MISS CHUCK","c"],[311,"SPINDLE CHUCK TIME OVER","w"],[312,"CHUCK FOOT SWITCH MALFUNCTION","n"],[313,"SELECT CHUCK INT-EXT","n"],[314,"CHUCK SENSOR MALFUNCTION","c"],[315,"CHUCK PRESSURE LOW","c"],[316,"CHUCK INT-EXT SELECT INHIBIT","c"],[317,"C AXIS CONNECTION TIME OVER","w"],[318,"C AXIS SENSOR MALFUNCTION","n"],[319,"B AXIS SENSOR MALFUNCITON","w"],[320,"B AXIS ROTATION INHIBIT","c"],[321,"TOOL EYE EXTEND INHIBIT","c"],[322,"TOOL EYE ARM POSITION NG","w"],[323,"TOOL EYE ARM POS. SENSOR MALF.","w"],[329,"TAIL SPINDLE TIME OVER","w"],[332,"FRONT DOOR SENSOR MALFUNCTION","w"],[333,"FRONT DOOR ACT. TIME OVER","w"],[334,"AXIS MOVE INHIBIT","c"],[335,"ATC SHIFTER ACTION","n"],[337,"DRIVE MODE CHANGE INHIBIT","n"],[339,"ATC COVER ACT.TIME OVER","w"],[340,"ATC CONTROLLER MALFUNCTION","c"],[341,"SHIFTER CONTROLLER MALF.","c"],[342,"CARRIER CONTROLLER MALF.","c"],[343,"RAPID MODE INHI. (HOME RETURN)","n"],[344,"DRIVE MODE NG (HOME RETURN)","n"],[345,"START ERR(DOOR OPEN/SET UP SW.)","n"],[347,"START ERROR (ATC COVER OPEN)","n"],[348,"START ERROR (MG COVER OPEN)","n"],[349,"START ERROR (TOOL UNCLAMP)","n"],[350,"START ERROR (TOOL EYE EXT.)","n"],[351,"START ERROR (SPINDLE MISS CHUCK)","n"],[352,"START ERROR(TAIL SPINDLE POS.)","n"],[354,"START ERROR (ATC ARM POSITION)","n"],[357,"TOOL SHIFTER&CARRIER POSI.ERROR","n"],[358,"LINE FILTER WARNING","n"],[359,"ATC ARM INHIBIT","n"],[360,"C/S ERROR(CHIP No. MISS MATCH)","n"],[361,"START ERROR (SET UP SWITCH)","c"],[362,"AXIS SYNCHRO. ALARM","c"],[363,"OVERLOAD DETECTION","c"],[364,"C AXIS LUBE PRESSURE LOW","c"],[365,"C AXIS LUBE LEVEL LOW","c"],[366,"MILL CLAMP INVALID (NOT ORIENT)","c"],[368,"MILL UNCLAMP INV. (TOOL UNCLAMP)","c"],[369,"SPINDLE SYNCHRO INHIBIT","c"],[370,"DOOR UNLOCK INHIBIT(COND.MISS)","n"],[371,"COND. MISSING (SET UP SWITCH)","c"],[372,"HIGH PRESS. COOL SYSTEM ALARM","c"],[373,"HIGH PRE COOL SYS. PRE. ALARM","c"],[374,"COOLANT LEVEL TOO LOW","c"],[376,"WORK NO. SEARCH ERROR","w"],[377,"WORK NO. SET ERROR","w"],[378,"WARMING UP !!","n"],[379,"WARMING UP ERROR","c"],[381,"MAINTENANCE DOOR OPEN","n"],[382,"OPERATING PANEL POS. UNSUITABLE","c"],[383,"SPINDEL GEAR LUBE PRE ALARM","c"],[384,"SPINDLE GEAR LUBE LEVEL LOW","c"],[385,"TAIL CONDITION ALARM","c"],[386,"TAIL POSITION MALFUNCTION","c"],[387,"TAIL DATA ILLEGAL","c"],[389,"SCALE F/B AIR PRESSURE DOWN","n"],[390,"BATTERY VOLTAGE LOW","n"],[391,"SAVING ENERGY MODE","n"],[392,"THERMAL DISPLACEMENT OFFSET ER","c"],[394,"START ERROR(CHUCK OPEN)","c"],[395,"ATC MALFUNCTION","c"],[397,"OPERATING SWITCH FAULT","c"],[398,"MOTOR&SERVO POWER OFF FAULT","c"],[401,"ILLEGAL FORMAT","n"],[402,"ILLEGAL NUMBER INPUT","n"],[403,"PROGRAM TOO LARGE","n"],[404,"MEMORY CAPACITY EXCEEDED","n"],[405,"PROGRAM No. NOT FOUND","n"],[406,"MEMORY PROTECT","n"],[407,"DESIGNATED DATA NOT FOUND","n"],[408,"PROGRAM ERROR","n"],[409,"ILLEGAL INSERTION","n"],[410,"ILLEGAL DELETION","n"],[411,"POWER OFF DURING PROGRAM EDIT","n"],[412,"SUB PROGRAM NESTING EXCEEDED","n"],[413,"MAX. No. OF REGIST PROG EXCEEDED","n"],[414,"AUTO CALCULATION IMPOSSIBLE (No., )","n"],[415,"MIS-SET G CODE","n"],[416,"AUTO PROCESS IMPOSSIBLE","n"],[417,"EDITING PROHIBITED","n"],[418,"EIA/ISO CONVERTING","n"],[419,"AUTO TAP PROCESS IMPOSSIBLE","n"],[420,"SAME DATA EXISTS","n"],[421,"DATA NOT FOUND","n"],[422,"MEMORY PROTECT (I/O BUSY)","n"],[423,"MAX NUMBER OF TOOLS EXCEEDED","n"],[424,"ALL POCKET NUMBERS NOT ASSIGNED","n"],[425,"DATA MISSING","n"],[426,"PROGRAM DATA MISSING","n"],[427,"MEMORY PROTECT (AUTO MODE)","n"],[428,"MEMORY PROTECT (AUTO OPERATION)","n"],[429,"CANNOT PERFORM MEASUREMENT","n"],[430,"ILLEGAL TOOL DESIGNATED","n"],[431,"ILLEGAL PALLET No.","n"],[432,"ILLEGAL TOOL No.","n"],[433,"SAME PROGRAM EXISTS","n"],[434,"NO ASSIGNED TOOL IN TOOL FILE","n"],[435,"PROGRAM CHECK NOT ALLOWED","n"],[436,"UNREGISTERED TNo.","n"],[437,"NO NOM-φ DATA IN PROGRAM","n"],[438,"END UNIT NOT FOUND","n"],[439,"MAZATROL PROGRAM DESIGNATED","n"],[440,"EIA/ISO PROGRAM DESIGNATED","n"],[441,"UNREGISTERED HEAD DATA","n"],[442,"DATA RENEWAL NOT ALLOWED","n"],[443,"HELP IS NOT AVAILABLE","n"],[444,"EDITING PROHIBITED AREA","n"],[445,"ILLEGAL UNIT","n"],[446,"RESTART TIMES EXCEEDED","n"],[447,"PROGRAM ERROR","n"],[448,"RESTART SEARCH UNFINISHED","w"],[449,"RESTART SEARCH FINISHED","n"],[450,"TOUCH SENSOR NOT IN SPINDLE","n"],[451,"SAME MATERIAL ENTERED","n"],[452,"NO SHAPE DATA IN UNIT","n"],[453,"NO SHAPE DATA TO COPY IN UNIT","n"],[454,"CURSOR POSITION INCORRECT","n"],[455,"SAME PROGRAM No. DESIGNATED","n"],[456,"NO TOOL IN SPINDLE","n"],[457,"DATA ADDRESS NOT FOUND","n"],[458,"INTERFERING TOOL REGISTERED","n"],[459,"DISPLAY PROTECT","n"],[461,"PRIORITY No. OVERLAP (WNo., UNo., SNo.)","n"],[462,"ILLEGAL PRIORITY NUMBER (WNo., UNo., SNo.)","n"],[463,"PRIORITY No. OVERFLOW","n"],[464,"ILLEGAL ADDRESS INPUT","n"],[465,"EIA SHAPE DATA NOT FOUND","n"],[466,"INCORRECT EIA SHAPE DATA","n"],[468,"MAINTENANCE CHECK WARNING","n"],[469,"TPC DATA EDIT IMPOSSIBLE","n"],[470,"ILLEGAL TPC DATA","n"],[471,"TPC DATA NOT FOUND","n"],[472,"CALCULATION ERROR","n"],[473,"FINAL POINT DATA NOT FOUND","n"],[474,"NO PROGRAM DISPLAY (TAPE MODE)","n"],[475,"NO EIA/ISO OPTION","n"],[476,"NO OPTION","n"],[477,"DESCRIPTION IMPOSSIBLE","n"],[478,"MEMORY PROTECT (MEASURING)","n"],[480,"UNIT NOT SELECTED (No., )","c"],[481,"DIRECTORY NOT FOUND","n"],[484,"INCORRECT SPINDLE TOOL","n"],[485,"INCORRECT HEAD INDEX ANGLE","n"],[486,"ILLEGAL JAW DATA","n"],[487,"LONG BORING BAR ADAPTER EXISTS (Pocket No., )","n"],[488,"MEMORY PROTECT (MAGAZINE SETUP)","n"],[489,"CANNOT SET THREAD POSITION","n"],[490,"REGISTRATION NUMBER EXCEEDED","n"],[491,"ITEM NOT SETUP","n"],[492,"CANNOT EDIT 3D DATA","n"],[493,"SELECT JAW TYPE","n"],[494,"CANNOT SELECT TNO (NOT MAGAZINE)","n"],[495,"INCORRECT CAD MODEL DATA (Note, )","n"],[497,"HEAD ANGLE INCORRECT","n"],[498,"NO HEAD DATA","n"],[499,"ILLEGAL HEAD TYPE","n"],[501,"ILLEGAL FORMAT","n"],[502,"CANNOT LOAD (PROG SIZE EXCEED) (WNo., )","n"],[503,"CANNOT LOAD (TOO MANY PROGRAMS) (WNo., )","n"],[504,"CANNOT LOAD (AUTO OPERATION)","n"],[505,"CANNOT LOAD (MISMATCH)","n"],[506,"SAME PROGRAM No. DESIGNATED (WNo., )","n"],[507,"NO DESIGNATED PROGRAM (WNo., )","n"],[508,"MEMORY CAPACITY EXCEEDED (WNo., )","n"],[509,"MEMORY PROTECT","n"],[510,"DATA DO NOT MATCH (WNo., )","n"],[511,"PROGRAM DATA NOT SAME (WNo., UNo., SNo.)","n"],[512,"NO EIA/ISO OPTION (WNo., )","n"],[513,"PROGRAM DATA TYPE INCORRECT","n"],[514,"DATA TYPE INCORRECT","n"],[515,"INCORRECT DESIGNATED DATA","n"],[516,"SYSTEM ERROR","n"],[517,"PROG. OPERATION NOT ALLOWED (WNo., )","n"],[518,"DATA OPERATION NOT ALLOWED","n"],[519,"DATA SIZE EXCEEDED (WNo., Note, )","n"],[520,"EIA/ISO CONVERT ERROR (WNo., )","n"],[521,"CANNOT LOAD (WRONG PROG TYPE)","n"],[522,"SAME SET No. EXISTS","n"],[523,"IMPOSSIBLE TO CONVERT EIA (Prg No. Processing No., )","n"],[525,"HDD I/O ERROR (Cause, )","w"],[526,"PROFIBUS-DP COMMUNICATION ERROR (Note 1, Note 2, )","n"],[527,"ETHERNET/IP COMMUNICATION ERROR (Note 1, Note 2, )","n"],[528,"FIELDNETWORK SETTING ERROR (Note 1, Note 2, )","n"],[529,"CC-LINK COMMUNICATION ERROR (No. )","n"],[530,"CMT MIS-CONNECTED ( )","n"],[531,"DESIGNATED FILE NOT FOUND (WNo. )","n"],[532,"CMT NOT CONNECTED ( )","n"],[533,"NO OPERABLE DATA IN CMT ( )","n"],[534,"CMT I/O ERROR","n"],[535,"CMT WRITE PROTECT","n"],[536,"POWER OFF DURING CMT OPERATION","n"],[537,"CMT MALFUNCTION","n"],[538,"CC-LINK UNCONNECTED","n"],[539,"—","n"],[540,"TAPE READER MIS-CONNECTED","n"],[541,"TAPE PUNCHER MIS-CONNECTED","n"],[542,"NO TAPE READER PUNCHER OPTION","n"],[543,"WNo. NOT FOUND ON PAPER TAPE","n"],[544,"SET NEW PAPER TAPE","n"],[545,"POWER OFF TAPE READ/PUNCH OPER.","n"],[546,"TAPE READER ERROR","n"],[547,"TAPE PUNCHER ERROR","n"],[548,"MAZATROL PROGRAM DESIGNATED","n"],[549,"DESIGNATED DATA NOT FOUND","n"],[550,"PARITY H ERROR","n"],[551,"PARITY V ERROR","n"],[552,"PROGRAM END NOT FOUND","n"],[553,"WORK No. UNITS EXCEEDED","n"],[554,"POWER OFF IN EIA/ISO CONVERT","n"],[555,"—","n"],[556,"—","n"],[557,"DESIGNATED DIRECTORY NOT FOUND","c"],[563,"PRINTER I/O ERROR (Cause, )","n"],[564,"—","n"],[565,"ID MIS-CONNECTED","n"],[566,"POWER STOPPED DURING ID OPER.","n"],[567,"ID I/O ERROR","n"],[568,"IBS COMMUNICATION ERROR (Note 1, Note 2, )","w"],[569,"—","n"],[570,"NO DNC OPTION","n"],[571,"ILLEGAL FORMAT","n"],[572,"CANNOT LOAD (PROG SIZE EXCEED) (WNo. )","n"],[573,"CANNOT LOAD (TOO MANY PROGRAMS) (WNo. )","n"],[574,"CANNOT LOAD (AUTO OPERATION)","n"],[575,"CANNOT LOAD (MISMATCH)","n"],[576,"SAME PROGRAM No. DESIGNATED (WNo. )","n"],[577,"NO DESIGNATED PROGRAM (WNo. )","n"],[578,"MEMORY CAPACITY EXCEEDED (WNo. )","n"],[579,"MEMORY PROTECT","n"],[580,"---","n"],[581,"---","n"],[582,"DESIGNATED FILE NOT TRANSFERRED","n"],[583,"PROGRAM DATA TYPE INCORRECT","n"],[584,"RECEIVED DATA TYPE INCORRECT","n"],[585,"CABLE MIS-CONNECTED","n"],[586,"SYSTEM ERROR","n"],[587,"PROG. OPERATION NOT ALLOWED (WNo. )","n"],[588,"DATA OPERATION NOT ALLOWED","n"],[589,"DATA SIZE EXCEEDED (WNo., Note, )","n"],[590,"DNC COMMAND IMPOSSIBLE","n"],[591,"NO OPTION (WNo., )","n"],[592,"ILLEGAL COMMAND RECEIVED","n"],[593,"DNC I/O ERROR","n"],[594,"SEND-RECEIVE ERROR","n"],[595,"FILE TRANSFER ERROR","n"],[596,"DNC MALFUNCTION","n"],[597,"POWER OFF DURING DNC OPERATION","n"],[598,"NO EIA/ISO OPTION","n"],[599,"DESIGNATED DATA NOT FOUND","n"],[600,"—","n"],[601,"SYSTEM ERROR","c"],[602,"PROG. OPERATION NOT ALLOWED","c"],[603,"NO DESIGNATED PROGRAM (WNo., UNo., SNo.)","c"],[604,"NO PITCH IN MULTI WORKPIECES (WNo., UNo., SNo.)","c"],[605,"NO TOOL DATA IN PROGRAM (WNo., UNo., SNo.)","c"],[606,"NO FIGURE IN PROGRAM (WNo., UNo., SNo.)","c"],[607,"MISSING INPUT DATA (POINT) (WNo., UNo., SNo.)","c"],[608,"MISSING INPUT DATA (LINE) (WNo., UNo., SNo.)","c"],[609,"MISSING INPUT DATA (FACE) (WNo., UNo., SNo.)","c"],[610,"MISSING TOOL DATA FOR POINT (WNo., UNo., SNo.)","c"],[611,"MISSING TOOL DATA FOR LINE (WNo., UNo., SNo.)","c"],[612,"MISSING TOOL DATA FOR FACE (WNo., UNo., SNo.)","c"],[613,"DATA MISSING IN WPC UNIT (WNo., UNo., SNo.)","c"],[614,"SUB PROGRAM NESTING EXCEEDED (WNo., UNo., SNo.)","c"],[615,"DATA MISSING IN OFFSET UNIT (WNo., UNo., SNo.)","c"],[616,"DATA ERROR IN M CODE UNIT (WNo., UNo., SNo.)","c"],[617,"EXECUTION IMPOSSIBLE (WNo., UNo., SNo.)","c"],[618,"POINT CUTTING PARAMETER ERROR (WNo., UNo., SNo.)","c"],[619,"LINE/FACE CUTTING PAR. ERROR (WNo., UNo., SNo.)","c"],[620,"CUTTING SPEED ZERO (WNo., UNo., SNo.)","c"],[621,"FEEDRATE ZERO (WNo., UNo., SNo.)","c"],[622,"DESIGNATED UNIT NOT FOUND","c"],[623,"DESIGNATED SNo. NOT FOUND","c"],[624,"RESTART IMPOSSIBLE","c"],[625,"ENDMILL DIAMETER EXCEEDED (WNo., UNo., SNo.)","c"],[626,"DESIGNATED TOOL NOT FOUND (WNo., UNo., SNo.)","c"],[627,"TOOL DATA INPUT PROCESS ERROR (WNo., UNo., SNo.)","c"],[628,"NO ASSIGNED TOOL IN TOOL FILE (WNo., UNo., SNo.)","c"],[629,"TOOL FILE INPUT PROCESS ERROR (WNo., UNo., SNo.)","c"],[630,"Z DEPTH OF CUT TOO LARGE (WNo., UNo., SNo.)","c"],[631,"STOCK REMOVAL R TOO LARGE (WNo., UNo., SNo.)","c"],[632,"RADIAL DEPTH OF CUT ZERO (WNo., UNo., SNo.)","c"],[633,"Z DEPTH OF CUT ZERO (WNo., UNo., SNo.)","c"],[634,"FINISH DEPTH OF CUT ZERO (WNo., UNo., SNo.)","c"],[635,"TOOL DIAMETER ZERO (WNo., UNo., SNo.)","c"],[636,"STOCK REMOVAL Z TOO SMALL (WNo., UNo., SNo.)","c"],[637,"STOCK REMOVAL R TOO SMALL (WNo., UNo., SNo.)","c"],[638,"R DEPTH OF CUT TOO LARGE (WNo., UNo., SNo.)","c"],[639,"DESIGNATED PALLET NOT FOUND (WNo., UNo., SNo.)","c"],[640,"ILLEGAL INDEX ANGLE INPUT (WNo., UNo., SNo.)","c"],[641,"MISSING INPUT DATA (WNo., UNo., SNo.)","c"],[642,"ILLEGAL NEXT PALLET No. INPUT (WNo., UNo., SNo.)","c"],[643,"DATA ERROR IN MAN. PROG. UNIT (WNo., UNo., SNo.)","c"],[644,"NOMINAL DIAMETER NOT FOUND (WNo., UNo., SNo.)","c"],[645,"PRIORITY No. OVERLAP (WNo., UNo., SNo.)","c"],[646,"ILLEGAL PRIORITY NUMBER (WNo., UNo., SNo.)* (LNo. 1, LNo. 2, )**","c"],[647,"END UNIT NOT FOUND (WNo., UNo., SNo.)","c"],[648,"MULTI OFFSET DATA TOO LARGE (WNo., UNo., SNo.)","c"],[649,"MEASURING SEQUENCE INCOMPLETE (WNo., UNo., SNo.)","c"],[650,"CHAMFERING IMPOSSIBLE (WNo., UNo., SNo.)","c"],[651,"GEAR PARAMETER ERROR (WNo., UNo., SNo.)","c"],[652,"GEAR SHIFT DATA ERROR (WNo., UNo., SNo.)","c"],[653,"ILLEGAL TOOL DESIGNATED (WNo., UNo., SNo.)","c"],[654,"TOOL DATA ERROR (WNo., UNo., SNo.)","c"],[655,"PROGRAM DATA CORRUPT (WNo., UNo., SNo.)","c"],[656,"MEASURING SEQ. DATA NOT FOUND (WNo., UNo., SNo.)","c"],[657,"ILLEGAL NUMBER INPUT (WNo., UNo., SNo.)","c"],[658,"INITIAL Z < MATERIAL DEPTH (WNo., UNo., SNo.)","c"],[659,"NO TOOL PATH CHECK (I/O BUSY) (WNo., )","n"],[660,"CANNOT MOVE DESIGNATED AXIS","c"],[661,"ILLEGAL M CODE (WNo., UNo., SNo.)","c"],[662,"NO INCLINED PLANE OPTION (WNo., UNo., )","c"],[663,"WRONG HEAD ANGLE (WNo., UNo., )","c"],[664,"3-D UNIT NOT FOUND IN PROGRAM (WNo., UNo., SNo.)","c"],[665,"ILLEGAL DATA IN 3-D UNIT (WNo., UNo., SNo.)","c"],[666,"PLANE DATA NOT FOUND IN PROGRAM (WNo., UNo., SNo.)","c"],[667,"CHECK SURFACE DATA NOT FOUND (WNo., UNo., SNo.)","c"],[668,"ILLEGAL PLANE DATA IN PROGRAM (WNo., UNo., SNo.)","c"],[669,"ILLEGAL TOLERANCE DATA INPUT (WNo., UNo., SNo.)","c"],[670,"ILLEGAL SEQUENCE DATA IN PRG. (WNo., UNo., SNo.)","c"],[671,"ILLEGAL MOVE SURFACE DATA (WNo., UNo., SNo.)","c"],[672,"ILLEGAL AREA DATA INPUT (WNo., UNo., SNo.)","c"],[673,"FL NUMBER EXCEEDED (3-D UNIT) (WNo., UNo., SNo.)","c"],[674,"NO 5FACE CUTTING OPTION (WNo., UNo., )","c"],[675,"ILLEGAL CUTTING FACE DESIGNATED (WNo., UNo., SNo.)","c"],[676,"ILLEGAL UNIT (WNo., UNo., )","c"],[677,"UNREGISTERED HEAD DATA (WNo., UNo., )","c"],[678,"NO INTERSECTION (WNo., UNo., SNo.)","c"],[679,"CONNECTING CORNER IMPOSSIBLE (WNo., UNo., SNo.)","c"],[680,"NUMBER OF HOLES EXCEEDED (>500) (WNo., UNo., SNo.)","c"],[681,"CORNER R/C DEFINED AT SPT/FPT (WNo., UNo., SNo.)","c"],[682,"ILLEGAL REPEAT FIGURE (WNo., UNo., SNo.)","c"],[683,"UNDEFINED CORNER (WNo., UNo., SNo.)","c"],[684,"POINT CUTTING PATTERN ERROR (WNo., UNo., SNo.)","c"],[685,"SQUARE CANNOT BE DEFINED (WNo., UNo., SNo.)","c"],[686,"NO STARTING POINT (WNo., UNo., SNo.)","c"],[687,"NO FINISH POINT (WNo., UNo., SNo.)","c"],[688,"INSUFFICIENT INPUT DATA (WNo., UNo., SNo.)","c"],[689,"INPUT DATA TOO MANY (WNo., UNo., SNo.)","c"],[690,"ILLEGAL RADIUS (WNo., UNo., SNo.)","c"],[691,"MOUNT (VALLEY) SHAPE ERROR (WNo., UNo., SNo.)","c"],[692,"MAX POINT NUMBER EXCEEDED (>200) (WNo., UNo., SNo.)","c"],[693,"NUMBER OF SHAPES TOO LARGE (WNo., UNo., SNo.)","c"],[694,"FIXED FIGURE DESIGNATED ERROR (WNo., UNo., SNo.)","c"],[695,"POINT INSIDE CIRCLE (WNo., UNo., SNo.)","c"],[696,"ILLEGAL DIRECTION (WNo., UNo., SNo.)","c"],[697,"DATUM <P> REQUIRED (WNo., UNo., SNo.)","c"],[698,"TWO POINTS OVERLAP (WNo., UNo., SNo.)","c"],[699,"PARALLEL LINE (WNo., UNo., SNo.)","c"],[700,"—","n"],[701,"DEFINED SHAPE TOO SMALL (WNo., UNo., SNo.)","w"],[702,"FIGURE DEFINITION ERROR (WNo., UNo., SNo.)","w"],[703,"PROCESS DEFINITION ERROR (WNo., UNo., SNo.)","n"],[704,"TOOL INTERFERENCE (WNo., UNo., SNo.)","w"],[705,"APPROACH POINT ERROR (WNo., UNo., SNo.)","c"],[706,"ILLEGAL FIGURE DATA (WNo., UNo., SNo.)","n"],[707,"CHAMFER CUTTER INTERFERENCE (WNo., UNo., SNo.)","w"],[708,"BLOCK DATA LIMIT EXCEEDED (WNo., UNo., SNo.)","n"],[709,"CHECK DEPTH-R (WNo., UNo., SNo.)","n"],[710,"CORNER ROUNDING CUTTER DIA ERR (WNo., UNo., SNo.)","n"],[711,"UNIT DATA NOT FOUND (WNo., UNo., SNo.)","c"],[712,"ILLEGAL UNIT DATA (WNo., UNo., SNo.)","c"],[713,"SEQUENCE DATA NOT FOUND (WNo., UNo., SNo.)","c"],[714,"ILLEGAL SEQUENCE DATA (WNo., UNo., SNo.)","c"],[715,"ILLEGAL CUTTING POINT (WNo., UNo., SNo.)","c"],[716,"ILLEGAL CUTTING START POINT (WNo., UNo., SNo.)","c"],[717,"SHAPE EXCEEDS MATERIAL SIZE (WNo., UNo., SNo.)","c"],[718,"CUTTING DIRECTION NOT DEFINED (WNo., UNo., SNo.)","c"],[719,"REVERSE SHAPE CONTOUR (WNo., UNo., SNo.)","c"],[720,"DOUBLE SHAPE CONTOUR (WNo., UNo., SNo.)","c"],[721,"ILLEGAL RADIUS (WNo., UNo., SNo.)","c"],[722,"ILLEGAL CORNER DEFINITION (WNo., UNo., SNo.)","c"],[723,"EXCEEDS NUMBER OF SHAPES (WNo., UNo., SNo.)","c"],[724,"EXCEEDS NUMBER OF VALLEY SHAPES (WNo., UNo., SNo.)","c"],[725,"ILLEGAL COMMON DATA (RADIAL) (WNo., UNo., SNo.)","c"],[726,"ILLEGAL COMMON DATA (AXIAL) (WNo., UNo., SNo.)","c"],[727,"MATERIAL SHAPE CROSSING (WNo., UNo., SNo.)","c"],[728,"EXCESSIVE FINISH ALLOWANCE (WNo., UNo., SNo.)","c"],[729,"ILLEGAL SHAPE DESIGNATED (CNR) (WNo., UNo., SNo.)","c"],[730,"ILLEGAL SHAPE DESIGNATED (EDG) (WNo., UNo., SNo.)","c"],[731,"ILLEGAL NUM. OF PATHS (THR) (WNo., UNo., SNo.)","c"],[732,"ACCELERATION DISTANCE EXCEED (WNo., UNo., SNo.)","c"],[733,"ILLEGAL SHAPE DESIGNATED (GRV) (WNo., UNo., SNo.)","c"],[734,"ILLEGAL SHAPE EXCEEDS MTRL SIZE (WNo., UNo., SNo.)","c"],[735,"ILLEGAL DESIGNATED TL WID (GRV) (WNo., UNo., SNo.)","c"],[736,"ILLEGAL OVERLAP (WNo., UNo., SNo.)","c"],[737,"ILLEGAL DRILLING DIRECTION (WNo., UNo., SNo.)","c"],[738,"CORNER (R/C) DESIGNATED OVERLAP (WNo., UNo., SNo.)","c"],[739,"ILLEGAL FINISHING ALLOWANCE (WNo., UNo., SNo.)","c"],[740,"ILLEGAL ANGLE IN FIRST SEQUENCE (WNo., UNo., SNo.)","c"],[741,"ILLEGAL THREAD ANGLE (WNo., UNo., SNo.)","c"],[742,"ILLEGAL THREAD HEIGHT (WNo., UNo., SNo.)","c"],[743,"INTERSECTION NOT FOUND (WNo., UNo., SNo.)","c"],[744,"DATA MISSING (INTERSECTION) (WNo., UNo., SNo.)","c"],[745,"INTERSECTION CALCULATE IMPOSS. (WNo., UNo., SNo.)","c"],[746,"NO DEPTH OF CUT INFO. (WNo., UNo., SNo.)","c"],[747,"CHIP BREAKING CYCLE N/A (WNo., UNo., SNo.)","c"],[748,"CANNOT MAKE T-PATH (CHK DEPTH) (WNo., UNo., SNo.)","c"],[749,"CANNOT DRAW FIGURE","n"],[750,"—","n"],[751,"CURVE DEFINITION ERROR (WNo., UNo., SNo.)","n"],[752,"DESIGNATED AREA DATA IMPOSSIBLE (WNo., UNo., SNo.)","n"],[753,"SMALL TOOL (WNo., UNo., SNo.)","n"],[754,"LARGE TOOL (WNo., UNo., SNo.)","c"],[755,"R DIRECTION PITCH SMALL (WNo., UNo., SNo.)","c"],[756,"Z DIRECTION PITCH SMALL (WNo., UNo., SNo.)","c"],[757,"CURVE DEFINITION LARGE (WNo., UNo., SNo.)","c"],[758,"INITIAL POINT SET ERROR (WNo., UNo., SNo.)","c"],[759,"WPC UNIT NOT FOUND (MILL & TURN) (WNo., UNo., SNo.)","c"],[760,"NO T. CENTER POINT IN WPC UNIT (WNo., UNo., SNo.)","c"],[761,"HEAD ANGLE INCORRECT (C-AXIS) (WNo., UNo., SNo.)","c"],[762,"PROGRAM IS NOT MILL & TURN TYPE (WNo., UNo., SNo.)","c"],[763,"START PROCESS ILLEGAL (WNo., UNo., SNo.)","c"],[764,"MAIN PRG/SUB PRG TYPE MISMATCH (WNo., UNo., SNo.)","c"],[765,"Z-OFFSET NOT FOUND (WNo., UNo., SNo.)","c"],[766,"MAXIMUM NO.OF LAYOUTS EXCEEDED (WNo., UNo., SNo.)","c"],[767,"ILLEGAL ESCAPE TOOL No. (WNo., UNo., SNo.)","c"],[768,"4 AXIS MACHINING PROGRAM ERROR (WNo., UNo., SNo.)","c"],[769,"ILLEGAL TOOL DIRECTION/SPDL ROT (WNo., UNo., SNo.)","c"],[770,"FIN LEN ERROR (CHECK COM UNIT) (WNo., UNo., SNo.)","c"],[771,"ILLEGAL LOW TUR COMMON UNIT (WNo., UNo., SNo.)","c"],[772,"NO HEAD UNIT IN PROGRAM (WNo., UNo., SNo.)","c"],[773,"TRANSFER UNIT IN PROGRAM (WNo., UNo., SNo.)","c"],[774,"HEAD UNIT IN PROGRAM (WNo., UNo., SNo.)","c"],[775,"TOOL CANNOT PERFORM FACING (WNo., UNo., SNo.)","c"],[776,"NO Y-AXIS (WNo., UNo., SNo.)","c"],[777,"INCORRECT POSIT. CANNOT RESTART (WNo., UNo., SNo.)","c"],[778,"INCORRECT POSIT. CANNOT START (WNo., UNo., SNo.)","c"],[779,"—","n"],[780,"APPROACH PATH INTERFERENCE (WNo., UNo., SNo.)","c"],[781,"DBL SPDL OPER ILLEGAL TUR ASIGN (WNo., UNo., SNo.)","c"],[782,"DBL SPDL OPER NO TRANS UNIT (WNo., UNo., SNo.)","c"],[783,"DBL SPDL OP ILLEGAL SIMUL OP (WNo., UNo., SNo.)","c"],[784,"DBL SPDL OP ILLEGAL BALANCE CUT (WNo., UNo., SNo.)","c"],[785,"DBL SPDL OPER ILLEGAL TUR ESC (WNo., UNo., SNo.)","c"],[786,"DBL SPDL OP ILLEGAL MEASUREMENT (WNo., UNo., SNo.)","c"],[787,"DBL SPDL OPER ILLEGAL TRANSFER (WNo., UNo., SNo.)","c"],[788,"DBL SPDL OPER ILLEGAL HEAD UNIT (WNo., UNo., SNo.)","c"],[789,"DBL SPDL OPER UNIT ERROR (WNo., UNo., SNo.)","c"],[790,"ILLEGAL BALANCE CUT (WNo., UNo., SNo.)","c"],[791,"MUST INPUT CUTTING SPEED (WNo., UNo., SNo.)","c"],[792,"MUST INPUT FEEDRATE (WNo., UNo., SNo.)","c"],[793,"ILLEGAL MILL SPINDLE RPM (WNo., UNo., SNo.)","c"],[794,"INCORRECT B AXIS POSITION (WNo., UNo., SNo.)","c"],[795,"SHIFT-Y TOO LARGE ( , )","c"],[796,"NO MAZATROL L TURRET OPT (WNo., UNo., SNo.)","c"],[797,"BARRIER CANCEL ON (WNo., UNo., SNo.)","c"],[798,"JAW NO NOT FOUND (WNo., UNo., SNo.)","c"],[799,"—","n"],[800,"—","n"],[801,"SIMULTANEOUS AXIS EXCEEDED (WNo., NNo., BNo.)","c"],[802,"ILLEGAL AXIS NAME (WNo., NNo., BNo.)","c"],[803,"DIVIDED COMMAND ERROR (WNo., NNo., BNo.)","c"],[804,"PARITY H ERROR (WNo., NNo., BNo.)","c"],[805,"PARITY V ERROR (WNo., NNo., BNo.)","c"],[806,"ILLEGAL ADDRESS (WNo., NNo., BNo.)","c"],[807,"ILLEGAL FORMAT (WNo., NNo., BNo.)","c"],[808,"MIS-SET G CODE (WNo., NNo., BNo.)","c"],[809,"ILLEGAL NUMBER INPUT (WNo., NNo., BNo.)","c"],[810,"PROGRAM END NOT FOUND (WNo., NNo., BNo.)","c"],[811,"ILLEGAL O/N NUMBER (WNo., NNo., BNo.)","c"],[812,"ERROR IN BUFFER BLOCK (WNo., NNo., BNo.)","c"],[813,"INCH/METRIC OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[814,"INTERPOLATION OVERFLOW (WNo., NNo., BNo.)","c"],[815,"G60 OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[816,"FEEDRATE ZERO (WNo., NNo., BNo.)","c"],[817,"INCORRECT ARC DATA (WNo., NNo., BNo.)","c"],[818,"MISSING CENTER (NO DATA) (WNo., NNo., BNo.)","c"],[819,"HELICAL OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[820,"G02.1, G03.1 OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[821,"G07 OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[822,"ILLEGAL MODAL (WNo., NNo., BNo.)","c"],[823,"G17 - G19 COMMAND IN M98 (WNo., NNo., BNo.)","c"],[824,"G17 - G19 COMMAND IN G68 (WNo., NNo., BNo.)","c"],[825,"G17 - G19 COMMAND IN G38 - G42 (WNo., NNo., BNo.)","c"],[826,"G95 OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[827,"F0 COMMAND IN G02, G03 (WNo., NNo., BNo.)","c"],[828,"NO AUTO CORNER OVERRIDE OPTION (WNo., NNo., BNo.)","c"],[829,"ILLEGAL 2ND M CODE (WNo., NNo., BNo.)","c"],[830,"G96 OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[831,"G45, 46, 47, 48 OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[832,"G45 - G49 COMMAND IN M98 (WNo., NNo., BNo.)","c"],[833,"1/4, 3/4 CIRCLES IN G45 - G48 (WNo., NNo., BNo.)","c"],[834,"G40, G41, G42 OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[835,"G41, G42, FORMAT ERROR (WNo., NNo., BNo.)","c"],[836,"NO INTERSECTION (WNo., NNo., BNo.)","c"],[837,"TOOL OFFSET INTERFERENCE ERROR (WNo., NNo., BNo.)","c"],[838,"3-D OFFSET OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[839,"ILLEGAL OFFSET No. (WNo., NNo., BNo.)","c"],[840,"CANNED CYCLE OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[841,"DESIGNATED TOOL NOT FOUND (WNo., NNo., BNo.)","c"],[842,"SUB PROGRAM NESTING EXCEEDED (WNo., NNo., BNo.)","c"],[843,"DESIGNATED SNo. NOT FOUND (WNo., NNo., BNo.)","c"],[844,"PROGRAM No. NOT FOUND (WNo., NNo., BNo.)","c"],[845,"ILLEGAL VARIABLE COMMAND (WNo., NNo., BNo.)","c"],[846,"DESIGNATED NUMBER NOT FOUND (WNo., NNo., BNo.)","c"],[847,"NO “=” CODE IN PROGRAM (WNo., NNo., BNo.)","c"],[848,"M98 OPTION NOT FOUND (WNo., NNo., BNo.)","w"],[849,"FIGURE ROTATE NESTING EXCEEDED (WNo., NNo., BNo.)","w"],[850,"G68 AND M98 COMMANDS SAME BLOCK (WNo., NNo., BNo.)","c"],[851,"G68 OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[852,"USER MACRO OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[853,"EXTERNAL MACRO OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[854,"INCORRECT USERMACRO PROGRAMMING (WNo., NNo., BNo.)","c"],[855,"USER MACRO NESTING EXCEEDED (WNo., NNo., BNo.)","c"],[856,"USER MACRO ARGUMENT EXCEEDED (WNo., NNo., BNo.)","c"],[857,"INCORRECT USER MACRO G67 PROG. (WNo., NNo., BNo.)","c"],[858,"USER MACRO “[” NESTING EXCEEDED (WNo., NNo., BNo.)","c"],[859,"NUMBER OF PARENTHESIS MIS-MATCH (WNo., NNo., BNo.)","c"],[860,"CALCULATION IMPOSSIBLE (WNo., NNo., BNo.)","c"],[861,"DIVISION BY ZERO (WNo., NNo., BNo.)","c"],[862,"INTEGER VALUE OVERFLOW (WNo., NNo., BNo.)","c"],[863,"REAL VALUE OVERFLOW (WNo., NNo., BNo.)","c"],[864,"“IF” STATEMENT ERROR (WNo., NNo., BNo.)","c"],[865,"“WHILE” STATEMENT ERROR (WNo., NNo., BNo.)","c"],[866,"“SETVN” STATEMENT ERROR (WNo., NNo., BNo.)","c"],[867,"DO-END NESTING EXCEEDED (WNo., NNo., BNo.)","c"],[868,"DO-END MIS-MATCH (WNo., NNo., BNo.)","c"],[869,"NO USER MACRO IN TAPE MODE (WNo., NNo., BNo.)","c"],[870,"ILLEGAL VARIABLE NAME (WNo., NNo., BNo.)","c"],[871,"VARIABLE NAME EXISTS (WNo., NNo., BNo.)","c"],[872,"G51 OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[873,"G51.1 OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[874,"CORNER R/C OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[875,"NOT FOUND GEOMETRIC OPTION (WNo., NNo., BNo.)","c"],[876,"NOT FOUND GEOMETRIC OPTION (WNo., NNo., BNo.)","c"],[877,"G15 OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[878,"ADDRESS CHANGE OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[879,"G10 OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[880,"AXIS NOT ZERO RETURNED (WNo., NNo., BNo.)","c"],[881,"G30 OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[882,"ILLEGAL COMMAND CROSS MACHINING (WNo., NNo., BNo.)","c"],[883,"ILLEGAL CROSS MACHINING COMMAND (WNo., NNo., BNo.)","c"],[884,"REFERENCE POINT RETURN CHECK (WNo., NNo., BNo.)","c"],[885,"G22 OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[886,"BEYOND AREA OF G22 (WNo., NNo., BNo.)","c"],[887,"TAPE I/O ERROR (WNo., NNo., BNo.)","c"],[888,"FILE I/O ERROR ( , )","c"],[889,"G37 OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[890,"G31 OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[891,"G31.1 - G31.3 OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[892,"AUTO PROGRAMMING FAILURE (WNo., NNo., BNo.)","c"],[893,"PROGRAM DATA MISSING ( , )","c"],[894,"MAZATROL PROGRAM DESIGNATED ( , )","c"],[895,"—","n"],[896,"ILLEGAL CHAMFERING ( , )","c"],[897,"LAP CYCLE BLOCK NUMBER EXCEED ( , )","c"],[898,"LAP CYCLE ILLEGAL SHAPE DESIGN. ( , )","c"],[899,"ILLEGAL TAPER LENGTH ( , )","c"],[900,"—","n"],[901,"INCORRECT FIXED CYCLE COMMAND (WNo., NNo., BNo.)","c"],[902,"G10 OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[903,"ILLEGAL G10 L NUMBER (WNo., NNo., BNo.)","c"],[904,"ILLEGAL G10 OFFSET No. (WNo., NNo., BNo.)","c"],[905,"G11 OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[906,"NO S DIRECTIVE IN FIXED CYCLE (WNo., NNo., BNo.)","c"],[907,"DIFFERENT SPINDLE TYPE (WNo., NNo., BNo.)","c"],[908,"NO PITCH IN FIXED CYCLE (WNo., NNo., BNo.)","c"],[909,"ILLEGAL PITCH IN FIXED CYCLE (WNo., NNo., BNo.)","w"],[910,"—","n"],[911,"CORNER R/C OPTION NOT FOUND (WNo., NNo., BNo.)","w"],[912,"NO MOTION COMMAND AFTER R/C (WNo., NNo., BNo.)","w"],[913,"INCORRECT R/C COMMAND (WNo., NNo., BNo.)","w"],[914,"INCORRECT COMMAND AFTER R/C (WNo., NNo., BNo.)","w"],[915,"ANGLE < 1 DEGREE (WNo., NNo., BNo.)","w"],[916,"GEOMETRIC COMMAND NOT ABSOLUTE (WNo., NNo., BNo.)","w"],[917,"NO LINEAR COMMAND IN 2ND BLOCK (WNo., NNo., BNo.)","w"],[918,"INCORRECT ANGLE DATA (WNo., NNo., BNo.)","c"],[919,"INCORRECT PLANE SELECTION CMD. (WNo., NNo., BNo.)","c"],[920,"G27, M COMMANDS SAME BLOCK (WNo., NNo., BNo.)","c"],[921,"G29, M COMMANDS SAME BLOCK (WNo., NNo., BNo.)","c"],[922,"SKIP SPEED ZERO (WNo., NNo., BNo.)","c"],[923,"ILLEGAL COMMAND G37 AXIS (WNo., NNo., BNo.)","c"],[924,"G37, H COMMANDS SAME BLOCK (WNo., NNo., BNo.)","c"],[925,"H CODE REQUIRED (WNo., NNo., BNo.)","c"],[926,"ILLEGAL G37 SIGNAL (WNo., NNo., BNo.)","c"],[927,"SKIP COMMAND IN CORRECTING DIA (WNo., NNo., BNo.)","c"],[928,"ILLEGAL HEAD DATA No. (WNo., NNo., BNo.)","c"],[929,"HEAD DATA No. NOT FOUND (WNo., NNo., BNo.)","c"],[930,"ILLEGAL HEAD TYPE (WNo., NNo., BNo.)","c"],[931,"NO HEAD DATA (WNo., NNo., BNo.)","c"],[932,"RETURN R POINT IN CUTTING SIDE (WNo., NNo., BNo.)","c"],[933,"NO 5FACE CUTTING OPTION (WNo., NNo., BNo.)","c"],[934,"NO HIGH-SPEED MODE OPTION (WNo., NNo., BNo.)","c"],[935,"NO PRE-INTERP ACCEL/DECEL OPT. (WNo., NNo., BNo.)","c"],[936,"OPTION NOT FOUND (Option No., 0, 0)","c"],[937,"ILLEGAL TOOL DESIGNATED (WNo., NNo., BNo.)","c"],[938,"PARAMETER ERROR ( , )","c"],[939,"NO THREAD CUTTING OPTION (WNo., NNo., BNo.)","c"],[940,"NO INVERSE TIME OPTION (WNo., NNo., BNo.)","c"],[941,"G93 MODE (WNo., NNo., BNo.)","c"],[942,"NO 3-D CONVERSION OPTION (WNo., NNo., BNo.)","c"],[943,"CONVERTING IN 3-D COORDINATES (WNo., NNo., BNo.)","c"],[944,"WRONG CMD. IN 3-D COORDINATES (WNo., NNo., BNo.)","c"],[945,"NO HV MACHINING FUNC. OPTION (WNo., NNo., BNo.)","c"],[946,"NO MAZ. SUB PROGRAM OPTION ( , )","c"],[947,"NO BLOCK SKIP OPTION ( , )","c"],[948,"NO G54.1 OPTION ( , )","c"],[949,"NO G52 IN G54.1 MODE ( , )","c"],[950,"NO SPLINE CUTTING OPTION ( , )","c"],[951,"NO CORNER C/R COMMAND IN G0/G33 ( , )","c"],[952,"NO SYNCHRONIZED TAP OPTION (WNo., NNo., BNo.)","c"],[953,"TOOL DATA INPUT PROCESS ERROR ( , , )","c"],[954,"SCREW PITCH ERR ( , , )","c"],[955,"START AND END POINT NOT AGREE (WNo., NNo., BNo.)","c"],[956,"RESTART OPERATION NOT ALLOWED (WNo., NNo., BNo.)","c"],[957,"MANUAL INTERRUPT NOT ALLOWED (WNo., NNo., BNo.)","c"],[958,"AUTO PECKING IMPOSSIBLE (WNo., NNo., BNo.)","c"],[959,"WORKPIECE COORDINATE ERROR (WNo., NNo., BNo.)","c"],[960,"SUPERPOSIT CTRL ILLEGAL COMMAND (WNo., NNo., BNo.)","c"],[961,"ILLEGAL COMMAND 5X RADIUS COMP. (WNo., NNo., BNo.)","c"],[962,"CANNOT USE 5X RADIUS COMP. (WNo., NNo., BNo.)","c"],[963,"TURRET MIRROR IMAGE N/A (WNo., NNo., BNo.)","c"],[964,"DESIGNATED PNo NOT FOUND (WNo., NNo., BNo.)","c"],[965,"DESIGNATED PNo NOT FOUND (WNo., NNo., BNo.)","n"],[966,"NO ORBIT MACHINING OPTION (WNo., NNo., BNo.)","c"],[967,"ILLEGAL CMD IN ORBIT MACHINING (WNo., NNo., BNo.)","c"],[968,"CANNOT USE ORBIT MACHINING (WNo., NNo., BNo.)","c"],[969,"—","n"],[970,"TOOL TIP CTRL PARAMETER ERROR (WNo., NNo., BNo.)","c"],[971,"CANNOT USE TOOL TIP PT CONTROL (WNo., NNo., BNo.)","c"],[972,"ILLEGAL CMD TOOL TIP PT CTRL (WNo., NNo., BNo.)","c"],[973,"ILLEGAL TOOL AXIS VECTOR (WNo., NNo., BNo.)","c"],[974,"TOOL TIP PT CTRL FORMAT ERROR (WNo., NNo., BNo.)","c"],[975,"TOOL TIP PT CTRL N/A (WNo., NNo., BNo.)","c"],[976,"ILLEGAL COMMAND IN G124 (WNo., NNo., BNo.)","c"],[977,"CANNOT USE G124/G125 (WNo., NNo., BNo.)","c"],[978,"G124/G125 PARAMETER ERROR (WNo., NNo., BNo.)","c"],[979,"MACRO USER ALARM ( , )","c"],[980,"MACRO USER ALARM 1 ( , )","c"],[981,"MACRO USER ALARM 2 ( , )","c"],[982,"MACRO USER ALARM 3 ( , )","c"],[983,"MACRO USER ALARM 4 ( , )","c"],[984,"MACRO USER ALARM 5 ( , )","c"],[985,"MACRO USER ALARM 6 ( , )","c"],[986,"MACRO USER ALARM 7 ( , )","c"],[987,"MACRO USER ALARM 8 ( , )","c"],[988,"MACRO USER ALARM 9 ( , )","c"],[989,"MACRO USER ALARM 10 ( , )","c"],[990,"MACRO MEASUREMENT ALARM 1 ( , )","c"],[991,"MACRO MEASUREMENT ALARM 2 ( , )","c"],[992,"MACRO MEASUREMENT ALARM 3 ( , )","c"],[993,"MACRO MEASUREMENT ALARM 4 ( , )","c"],[994,"MACRO MEASUREMENT ALARM 5 ( , )","c"],[995,"MACRO MEASUREMENT ALARM 6 ( , )","c"],[996,"MACRO MEASUREMENT ALARM 7 ( , )","c"],[997,"MACRO MEASUREMENT ALARM 8 ( , )","c"],[998,"MACRO MEASUREMENT ALARM 9 ( , )","c"],[999,"MACRO MEASUREMENT ALARM 10 ( , )","c"],[1001,"SMART SAFE OPER. SYSTEM ERROR1 (No., Information, )","c"],[1002,"SMART SAFE OPER. SYSTEM ERROR2 (No., Axis name, )","c"],[1003,"SMART SAFE OPER. SYSTEM ERROR3 (No., Information, )","c"],[1004,"SMART SAFE OPER. SYSTEM ERROR4 (No., Information, )","c"],[1005,"SMART SAFE OPER. SYSTEM ERROR5 (No., Axis name, )","c"],[1006,"SMART SAFE OPER. SYSTEM ERROR6 (No., )","c"],[1007,"SMART SAFE OPER. SYSTEM ERROR7","c"],[1020,"SMART SAFE OPER. SYSTEM ALARM1 (No., Axis name, )","c"],[1021,"SMART SAFE OPER. SYSTEM ALARM2 (No., Information, )","c"],[1022,"SMART SAFE OPER. SYSTEM ALARM3 (No., Axis name, )","c"],[1023,"SMART SAFE OPER. SYSTEM ALARM4 (No., )","c"],[1024,"SMART SAFE OPER. SYSTEM ALARM5 (No., )","c"],[1101,"INTERFERE","w"],[1102,"INTERFERE","c"],[1103,"INTERFERE CHECK DATA OVERLOAD","n"],[1104,"RAPID FEED OVERRIDE SET AT 0","w"],[1105,"SAFETY SHIELD CALCULATING","n"],[1106,"SAFETY SHIELD FAILURE (Cause, Alarm No., )","c"],[1107,"INCOMPLETE TOOL DATA","c"],[1108,"CANNOT CHANGE OPERATION MODE","n"],[1109,"TOOL LENGTH OVER","c"],[1112,"CANNOT DETACH SPINDLE (Spindle No., )","c"],[1114,"SIMULTANEOUS AXIS EXCEEDED (WNo., UNo., SNo.)","c"],[1115,"AXIS NUMBER ERROR (No., )","n"],[1122,"INTERFERE (WNo., UNo., SNo.)","c"],[1123,"ILLEGAL OPE (SAFETY SHIELD) (Cause, )","c"],[1124,"ILLEGAL CYCLE START","c"],[1125,"SAFETY SHIELD CALCULATING","n"],[1127,"INVALID SAFETY SHIELD","n"],[1128,"SAFETY SHIELD CONDITION CHANGED","n"],[1129,"MEMORY PROTECT (SAFETY SHIELD)","n"],[1130,"EXCESSIVE SPACE ERROR COMP. (WNo., UNo., SNo.)","n"],[1131,"NO SPACE ERROR COMP. DATA","c"],[1132,"ILLEGAL CHOPPING CONDITION (Cause, )","c"],[1133,"ILLEGAL OPERATION IN CHOPPING (Cause, )","n"],[1134,"CHOPPING OVERRIDE SET AT 0 (Cause, )","w"],[1136,"HOB WORK SPINDLE ROT. EXCEEDED","c"],[1137,"SAFETY SHIELD CONDITION CHANGED","n"],[1138,"INVALID SAFETY SHIELD(MATERIAL)","n"],[1139,"ILLEGAL COMMAND (SAFETY SHIELD)","c"],[1141,"ILLEGAL OPER CUTTING PT CTRL","n"],[1145,"ILLEGAL OPER CUTTING PT CTRL (WNo., NNo., BNo.)","c"],[1152,"CANNOT USE ORBIT MACHINING (Cause, )","c"],[1153,"ILLEGAL OPER IN ORBIT MACHINING (Cause, )","w"],[1154,"FEED LIMITED IN ORBIT MACHINING","n"],[1155,"G124 MOTION RANGE EXCEEDED (Axis name, )","c"],[1157,"ILLEGAL OPERATION IN ENGRAVING","w"],[1158,"SENSOR ON WITH MOVING MULTI-AX","c"],[1159,"ILLEGAL WRITING TOOL-OFFSET","c"],[1160,"SAFETY SHIELD SYNCHRONOUS","n"],[1203,"DOOR OPEN CONDITION ERROR","w"],[1204,"AUTO DOOR CONTROLLER MALF.","c"],[1205,"AUTOMATIC DOOR SPEED ABNOMALY","c"],[1206,"AUTO DOOR OVERLOAD","c"],[1207,"TOOL FITTING ALARM","c"],[1208,"TOOL FITTING ERR(CUTTING I.L.)","w"],[1209,"LINE FILTER ALARM","w"],[1210,"LINE FILTER MALFUNCTION","n"],[1217,"LINE FILTER ALARM(HIGH PRESS)","w"],[1218,"LINE FILTER MALF.(HIGH PRESS)","n"],[1219,"COND.MISSING(CHUCK CLOSE)","c"],[1226,"COND.MISSING(NOT TURNING MODE)","c"],[1238,"COND.MISSING(DOOR OPEN)","c"],[1248,"TOOL EYE MEASURE OFFSET ALARM","c"],[1267,"B AXIS ROTATION INHL.(SP ROT)","n"],[1268,"B AXIS ROTATION INHL.(AX POS)","n"],[1269,"B AXIS ROTATION INHL.(DOOR/CV)","n"],[1282,"START ERROR (3D MODEL)","n"],[1294,"TAIL REVERSE INHIBIT","n"],[1296,"TAIL MCODE ERR (SPINDLE RUN!!)","w"],[1297,"THRUST-CONTROL ON","n"],[1319,"INVALID HANDLE INTERRUPT","n"],[1322,"COND.MISSING(DOOR OPEN)","n"],[1325,"COOLANT CHILLER UNIT MALF.","w"],[1350,"RECOVERY MODE IMPOSSIBLE.","n"],[1351,"ATC RECOVERY MODE SELECTED","n"],[1352,"TOOL No.OK?(SPDL,NEXT, )--->","n"],[1380,"NEED BEARING MAINTENANCE","c"],[1387,"MONITORING SENSOR MALF.","n"],[1388,"TSP EXCEEDED SPEED LIMIT","n"],[1389,"FREEZE ALARM(COOLANT CHILLER)","n"],[1392,"SPINDLE CONDITION WARNING","c"],[1400,"SYSTEM ERROR","n"],[1401,"FILE OPEN ERROR","n"],[1402,"FILE READ ERROR","n"],[1403,"FILE WRITE ERROR","n"],[1404,"MEMORY PROTECT (DATA IN USE)","n"],[1405,"FILE SIZE ERROR","n"],[1406,"LOW MEMORY","n"],[1407,"FILE CREATION ERROR","n"],[1408,"DATA TRANSFER ERROR","n"],[1409,"MILLING ONLY SELECTED","n"],[1410,"MILL & TURN (WPC) SELECTED","n"],[1411,"MILL & TRN (Z-OFS) SELECTED","n"],[1412,"INCORRECT G-CODE","n"],[1413,"INCORRECT RUNNING MODE","n"],[1414,"PROGRAM WRITING","n"],[1415,"ZERO CALCULATED TOOL LENGTH","n"],[1416,"CANNOT INDEX TOOL","n"],[1417,"PARAMETER ERROR","n"],[1418,"CANNOT USE LOWER TURRET","n"],[1420,"FILE SIZE LIMIT EXCEEDED","n"],[1421,"DATA ERROR","n"],[1422,"PROGRAM LAYOUT ERROR","n"],[1423,"TOOL PATH CHECK NOT COMPLETE","n"],[1424,"BARRIER INFORMATION NOT SET","n"],[1425,"ILLEGAL SETUP DATA","n"],[1426,"NO PROG LAYOUT FOR THIS PROCESS","n"],[1427,"3D INTERFRNCE CHECK MODEL ERROR","n"],[1428,"INCORRECT POCKET FOR LBB","n"],[1429,"CANNOT PERFORM AUTO SET","n"],[1430,"NOT ACTIVE PROGRAM","n"],[1431,"AUTO SET ERROR","n"],[1432,"TOOLMODEL NOT SELECTED","n"],[1433,"SAME TOOL MODEL NAME IN USE","n"],[1434,"INCOR CRS POS FOR PROG LAYOUT","n"],[1435,"3D MONITOR MANUAL MODE ONLY","n"],[1436,"DIFFERENT TYPE OF PROGRAM","n"],[1437,"CANNOT TRANSFER ACTIVE PROGRAM","n"],[1438,"NO SETUP DATA","n"],[1439,"CANNOT CHANGE UNIT","n"],[1440,"ID No. NOT FOUND","n"],[1441,"FILE NOT FOUND","n"],[1442,"ILLEGAL TOOL- CANNOT ASSIGN","n"],[1443,"BACKUP INCOMPLETE","n"],[1444,"PROCESS TOO LARGE -DEVIDE PROC","n"],[1445,"SAME SIMULTAN. NO IN RGH & FIN","n"],[1446,"CANNOT CHNG WNo (SNGL PROC MODE)","n"],[1447,"RESTORE OPERATION STOPPED","n"],[1448,"TOOL LENGTH OVER","n"],[1449,"NC PROGRAM MEMORY SIZE OVER (AREA, )","n"],[1450,"SELECT LOWER TURRET","n"],[1451,"TILT TABLE ANGLE INCORRECT","n"],[1452,"SPINDLE CONDITION CAUTION","n"],[1453,"MEMORY PROTECT (BACK UP)","n"],[1454,"MEMORY PROTECT (RESTORE)","n"],[1455,"ILLEGAL MAKER NAME","n"],[1456,"ILLEGAL MODEL NO.","n"],[1457,"CANNOT EDIT MAKER MADE DATA","n"],[1458,"NO DESIGNATED PROGRAM","n"],[1460,"CANNOT USE V.M. DURING AUTO OPE","n"],[1461,"TOOL MODEL IMPORT FAILURE","n"],[1462,"CANNOT USE DISPLAY SAVE DATA","n"],[1463,"INVALID HANDLE INTERRUPT","n"],[1464,"DEVICE ERROR","n"],[1466,"ILLEGAL ATTACHMENT No.","n"],[1467,"SETTING RANGE EXCEEDED","n"],[1470,"INCORRECT DESIGNATED DATA (Note)","n"],[1471,"1BLOCK SIZE OVER","n"],[1472,"INVALID REEDIT","n"],[1473,"NOT AUTO MODE","n"],[1474,"MEASURED RESULT MALFUNCTION","n"],[1475,"ILLEGAL MEASURING CONDITION","n"],[1477,"INCORRECT PROCESS SELECTION","n"],[1482,"CANNOT LOCK (LIMIT NUMBER)","n"],[1485,"DATA GUARD ALARM (No., )","n"],[1486,"ILLEGAL ID OR PASSWORD (No., )","n"],[1487,"ID NOT SELECT (No., )","n"],[1488,"PASSWORD MISMATCH (No., )","n"],[1489,"ILLEGAL CHARACTER (No., )","n"],[1490,"SAME ID ALREADY EXISTS (No., )","n"],[1491,"RANK NOT SELECT (No., )","n"],[1492,"ACCOUNT NUMBER OVER (No., )","n"],[1493,"ILLEGAL –9999 CODE (No., )","n"],[1494,"CANNOT EDIT SMC DATA (No., )","n"],[1495,"SMC DATA NOT SETUP (No., )","n"],[1496,"ILLEGAL ITS PARAMETER","n"],[1601,"ILLEGAL ATC MODE (WNo., UNo., SNo.)","c"],[1602,"SET INDEX UNIT BEFORE MACHINING (WNo., UNo., SNo.)","c"],[1603,"PROGRAM IS NOT WPC. (WNo., UNo., SNo.)","c"],[1604,"ILLEGAL TOOL DIRECTION (INDEX B) (WNo., UNo., SNo.)","c"],[1605,"LOW TUR CANNOT EXECUTE MIRROR (WNo., UNo., SNo.)","c"],[1606,"ILLEGAL CUTTING ANGLE (WNo., UNo., SNo.)","c"],[1607,"NEED TOOL ROTATION DIRECTION ( )","c"],[1608,"NEED SELECT TABLE UNIT (WNo., UNo., SNo.)","c"],[1609,"CANNOT SET WPC IN 2WORKPIECE (WNo., UNo., SNo.)","c"],[1610,"SET INDEX UNIT IN 2WORKPIECE (WNo., UNo., SNo.)","c"],[1611,"SET INDEX UNIT AFTER 2WORKPIECE (WNo., UNo., SNo.)","c"],[1612,"SET HEAD UNIT AFTER 2WORKPIECE (WNo., UNo., SNo.)","c"],[1613,"SET HEAD UNIT IN 2WORKPIECE (WNo., UNo., SNo.)","c"],[1614,"NO TABLE ROTATION AXIS (WNo., UNo., SNo.)","c"],[1615,"TABLE ROTATION CENTER NOT AGREE (WNo., UNo., SNo.)","c"],[1616,"CYLINDER CHAMFERING N/A (WNo., UNo., SNo.)","c"],[1617,"CYLINDER CHAMFERING IMPOSSIBLE (WNo., UNo., SNo.)","c"],[1618,"—","n"],[1619,"ILLEGAL APPROACH SCHEME (WNo., UNo., SNo.)","c"],[1620,"—","n"],[1621,"NO INDEX UNIT AFTER 5 FACE (WNo., UNo., SNo.)","c"],[1622,"NO WPC UNIT AFTER 5 FACE (WNo., UNo., SNo.)","c"],[1623,"TPC RELAY POINT SET IN 5 FACE (WNo., UNo., SNo.)","c"],[1624,"ILLEGAL UNIT IN 5 FACE (WNo., UNo., SNo.)","c"],[1625,"ATTACHMENT NO. MISMATCH (WNo., UNo., SNo.)","c"],[1626,"ILLEGAL COMMAND (ATTACHMENT) (WNo., UNo., SNo.)","c"],[1700,"LAYOUT UNABLE ( , )","c"],[1705,"AVOIDANCE DISTANCE EXCEEDED (WNo., UNo., SNo.)","c"],[1706,"UNCUT EXIST (WNo., UNo., SNo.)","n"],[1707,"UNCUT INCREASING (WNo., UNo., SNo.)","n"],[1708,"IPM PATH IMPOSSIBLE (WNo., UNo., SNo.)","c"],[1709,"ILLEGAL CUTTING FACE (C-AXIS) (WNo., UNo., SNo.)","c"],[1800,"CANNOT CHANGE TIME CONSTANT (WNo., NNo., BNo.)","c"],[1801,"ILLEGAL COMMD TIME CONST. CHANGE (WNo., NNo., BNo.)","c"],[1802,"ILLEGAL STARTUP CONDITION G12.1 (WNo., NNo., BNo.)","c"],[1803,"ILL GCODE (2ND SPDL POS ONLY) (WNo., NNo., BNo.)","c"],[1804,"NO Z-OFFSET (WNo., NNo., BNo.)","c"],[1805,"G68.2 OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[1806,"ILLEGAL CMD TILTED PLANE CMD (WNo., NNo., BNo.)","c"],[1807,"CANNOT USE G68.2 (WNo., NNo., BNo.)","c"],[1808,"CANNOT USE G53.1 (WNo., NNo., BNo.)","c"],[1809,"TILTED PLANE CMD FORMAT ERROR (WNo., NNo., BNo.)","n"],[1810,"TILTED PLANE CANNOT BE DEFINED (WNo., NNo., BNo.)","n"],[1811,"CANNOT USE G43.1 (WNo., NNo., BNo.)","c"],[1812,"ILLEGAL CMD IN G43.1 MODE (WNo., NNo., BNo.)","c"],[1813,"G54.4 OPTION NOT FOUND (WNo., NNo., BNo.)","c"],[1814,"ILLEGAL CMD IN G54.4 MODE (WNo., NNo., BNo.)","c"],[1815,"CANNOT USE G54.4 (WNo., NNo., BNo.)","c"],[1816,"CANNOT USE G18.1/G18.2/G18.3 (WNo., NNo., BNo.)","c"],[1817,"ILLEGAL CMD IN G18.2/G18.3 (WNo., NNo., BNo.)","c"],[1818,"ILLEGAL COMMAND (SAFETY SHIELD) ( , )","c"],[1819,"ILLEGAL C/S (SAFETY SHIELD) ( , )","c"],[1820,"ILLEGAL COMMD IN G54.4 (WNo., NNo., BNo.)","c"],[1821,"UNWRITABLE SYSTEM VARIABLE (WNo., NNo., BNo.)","c"],[1822,"—","n"],[1823,"NOT POSSIBLE SETTING ERROR (WNo., NNo., BNo.)","c"],[1824,"UNWRITABLE SYSTEM VARIABLE(ISS) (WNo., NNo., BNo.)","c"],[1825,"ILLEGAL M CODE ( , )","c"],[1826,"HEAD-AXIS ILLEGAL COMMAND (WNo., NNo., BNo.)","c"],[1827,"HEAD-AXIS ANGLE INCORRECT (WNo., NNo., BNo.)","c"],[1828,"—","n"],[1829,"NO 5 AXIS SPLINE CUTTING OPTION ( , )","c"],[1830,"CANNOT USE 5AXIS SPLINE CUTTING (WNo., NNo., BNo.)","c"],[1831,"ILLEGAL CHOPPING CONDITION (WNo., NNo., BNo.)","c"],[1832,"ILLEGAL COMMAND IN CHOPPING (WNo., NNo., BNo.)","c"],[1833,"ILLEGAL COND. CORRECT LENGTH.C (WNo., NNo., BNo.)","c"],[1834,"CORRECTING LENGTH.C (WNo., NNo., BNo.)","c"],[1835,"FILE ACCESS ERROR (Cause, )","c"],[1836,"CANNOT USE CUTTING PT CTRL (WNo., NNo., BNo.)","c"],[1837,"ILLEGAL CMD CUTTING PT CTRL (WNo., NNo., BNo.)","c"],[1838,"CUTTING PT CTRL FORMAT ERROR (WNo., NNo., BNo.)","c"],[1839,"CUTTING PT CONTROL N/A (WNo., NNo., BNo.)","c"],[1845,"CORNER SMOOTH CONTROL N/A (WNo., NNo., BNo.)","c"],[1846,"VARIABLE ACCELERATION CTRL N/A (WNo., NNo., BNo.)","c"],[1900,"2 CHARACTER AXIS ILLEGAL FORMAT (WNo., NNo., BNo.)","c"],[1901,"ILLEGAL ABSOLUTE AXIS NAME (WNo., NNo., BNo.)","c"],[1902,"ILLEGAL INCREMENT AXIS NAME (WNo., NNo., BNo.)","c"],[1903,"NO INVOLUTE OPTION (WNo., NNo., BNo.)","c"],[1904,"ILLEGAL CMD DURING G2.2/G3.2 (WNo., NNo., BNo.)","c"],[1905,"THIS MODE CANNOT CMD G2.2/G3.2 (WNo., NNo., BNo.)","c"],[1906,"G2.2/G3.2 FORMAT ERROR (WNo., NNo., BNo.)","c"],[1907,"5AXIS PARAM SELECT N/A (WNo., NNo., BNo.)","c"],[1908,"CANNOT USE 5AXIS PARAM SELECT (WNo., NNo., BNo.)","c"],[1909,"SAFETY SHIELD SYNC FAILURE ( , , )","c"],[1910,"—","n"],[1911,"ENGRAVING N/A (WNo., NNo., BNo.)","c"],[1912,"CANNOT USE ENGRAVING (WNo., NNo., BNo.)","c"],[1913,"ILLEGAL ARC RADIUS OF ENGRAVING (WNo., NNo., BNo.)","c"],[1914,"TEXT HEIGHT INVALID OF ENGRAV. (WNo., NNo., BNo.)","c"],[1915,"POS ADJUST OF G124 INCOMPLETE (WNo., NNo., BNo.)","c"],[1916,"HOB AXIS PARAMETER ERROR ( , )","c"],[1991,"NOT POSSIBLE CROSS MACHINING (WNo., NNo., Cause)","c"],[1992,"ILLEGAL AXES QTY. FOR CROSS (WNo., NNo., BNo.)","c"],[2001,"CAD FILE FORMAT ERROR ( , )","n"],[2028,"ILLEGAL WORKPIECE DIMENSION ( , )","n"],[2029,"ILLEGAL FIXTURE DIMENSION ( , )","n"],[2030,"CANNOT REGISTER (NUMBERS FULL) ( , )","n"],[2031,"SELECT REGISTERED DATA ( , )","n"],[2032,"SELECT DATA TO CHANGE ( , )","n"],[2033,"SELECT DATA TO DELETE ( , )","n"],[2034,"CANNOT ADD WORKPCE MATERIAL ( , )","n"],[2035,"CANNOT ADD FIXTURE ( , )","n"],[2036,"SURFACE SELECTION ERROR ( , )","n"],[2037,"DATA NOT REGISTERED ( , )","n"],[2038,"FILE WITH SAME NAME EXISTS ( , )","n"],[2039,"FILE NAME TOO LONG ( , )","n"],[2040,"WRITING ERROR ( , )","n"],[2049,"NUMBER OF JAWS = 0 ( , )","n"],[2051,"MODEL SELECTION ERROR ( , )","n"],[2052,"MODEL SELECTION ERROR ( , )","n"],[2053,"ILLEGAL SURFACE TYPE ( , )","n"],[2054,"ILLEGAL SURFACE ORIENTATION ( , )","n"],[2055,"NO PARALLEL PLANE ( , )","n"],[2056,"ILLEGAL FILE NAME ( , )","n"],[2057,"NUMBER ALREADY REGISTERED ( , )","n"],[2061,"WORK MATL LARGER THAN BARRIER ( , )","n"],[2062,"FIXTURE LARGER THAN BARRIER ( , )","n"],[2063,"CANNOT MOVE MODEL ( , )","n"],[2064,"— ( , )","n"],[2065,"NO 2ND SPINDLE ( , )","n"],[2066,"CANNOT CHANGE MATERIAL ORDER ( , )","n"],[2067,"ILLEGAL BOOLEAN OPERATION ( , )","n"],[2074,"CANNOT CHANGE TABLE AXIS ( , )","n"],[2075,"SETUP DATA DO NOT MATCH ( , )","n"],[2076,"CANNOT SELECT FEATURE POINT ( , )","n"],[2077,"SELECT SET FEATURE POINT ( , )","n"],[2078,"CANNOT ADD BASE POINT ( , )","n"],[2079,"ILLEGAL GRID VIEW SETTING ( , )","n"],[2080,"ILLEGAL WORK OFFSET SETTING ( , )","n"],[2084,"CANNOT CHANGE ASSEMBLE ( , )","n"],[2085,"CANNOT SELECT PLANE ( , )","n"],[2086,"SELECT ROTATE AXIS ( , )","n"],[2087,"CANNOT CONVERT WORKPCE ( , )","n"],[2088,"WORKPCE CONVERTING ( , )","n"],[2100,"MACN INTRF (WNo., UNo., SNo.)","n"],[2101,"NEAR MISS (WNo., UNo., SNo.)","n"],[2102,"WORK INTRF (WNo., UNo., SNo.)","n"],[2110,"ILLEGAL FORMAT ( , )","n"],[2111,"NO SOLID CHECK IN AUTO OPER ( , )","n"],[2112,"Z-OFFSET NOT FOUND (WNo., , )","n"],[2113,"JAW NO NOT FOUND (WNo., , )","n"],[2120,"RESTART PT SEARCH INTERRUPTED ( , )","n"],[2121,"RESTART POINT NOT FOUND ( , )","n"],[2130,"CANNOT CHECK WORKPIECE MODEL ( , )","n"],[2140,"CANNOT DISPLAY MACHINE MODEL ( , )","n"],[2150,"CANNOT DISPLAY TOOL MODEL ( , )","n"],[2151,"CANNOT DISPLAY T/S CENTER ( , )","n"],[2160,"ILLEGAL CYCLE START ( , )","w"],[2190,"NO MACHINE MODEL ( , )","n"],[2191,"CANNOT SELECT CHECK UNITS ( , )","n"],[2192,"CHECK UNITS SET ERROR ( , )","n"],[2193,"— ( , )","n"],[2194,"CONVERTED WORKPCE DO NOT EXIST ( , )","n"],[2195,"NEED CONVERT WORKPCE AGAIN ( , , )","n"],[2201,"READ-ONLY MEDIA ( , )","n"],[2202,"NETWORK LOGON FAILED ( , )","n"],[2203,"NETWORK PATH NOT FOUND ( , )","n"],[2204,"HARDWARE NOT INSTALLED ( , )","n"],[2205,"CANNOT ACCESS FILE ( , )","n"],[2206,"FILE CONFIGURATION ERROR ( , )","n"],[2207,"CANNOT ACCESS CNC ( , )","n"],[2208,"MACHINE DATA TRANSFER ERROR ( , )","n"],[2209,"CANNOT SAVE MACHINE DATA (Note, )","n"],[2210,"INVALID DRIVE SPECIFIED ( , )","n"],[2211,"FILE SAVINGFAILURE ( , )","n"],[2212,"FILE NOT FOUND ( , )","n"],[2600,"— ( , )","n"],[2604,"TAP SIZE OVER ( , )","n"],[2605,"— ( , )","n"],[2606,"LICENSE IMPORT ERROR (No., Type, )","n"],[2607,"— ( , )","n"],[2608,"— ( , )","n"],[2609,"MEMORY PROTECT (TRIAL MODE) ( , )","n"],[2610,"TOOL DATA MEASURING ( , )","n"],[2611,"TOOL OFFSET MEASURING","n"],[2612,"DESIGNATED TOOL NOT FOUND (WNo., UNo., SNo.)","n"],[2613,"ILLEGAL PROGRAM AREA","n"],[2614,"PROGRAM STOP WHILE WAITING (Head No., , , )","n"],[2615,"PROJECT NOT FOUND","n"],[2616,"MAX NUMBER OF PROJECTS EXCEEDED","n"],[2617,"SAME PROJECT EXISTS","n"],[2618,"CANNOT DISPLAY CROSS SECTION","n"],[2619,"ANALYZED DATA SIZE EXCEEDED","n"]],"p":[["DNC1","DNC1",null,"Type of terminator",0,0],["DNC2","DNC2",null,"Terminator code 1",0,0],["DNC3","DNC3",null,"Terminator code 2",0,0],["DNC5","DNC5",null,"DC code parity",0,0],["DNC9","DNC9",null,"Number of NC transmission retries during DNC file transfer",0,0],["DNC10","DNC10",null,"Number of NC reception retries during DNC file transfer",0,0],["DNC11","DNC11",null,"Number of NC transmission/reception retries during DNC command message transfer",0,0],["DNC12","DNC12",null,"@ waiting time during DNC transmission",0,0],["DNC13","DNC13",null,"“”, TEXT waiting time during DNC transmission",0,0],["DNC14","DNC14",null,"EOT waiting time during DNC transmission",0,0],["DNC15","DNC15",null,"NC stop time after reception of !",0,0],["DNC16","DNC16",null,"NC reset time after digital-out",0,0],["DNC17","DNC17",null,"NC stop time from reception",0,0],["DNC18","DNC18",null,"DNC command reply message waiting time",0,0],["DNC19","DNC19",null,"DNC machine number",0,0],["DNC20","DNC20",null,"NC transmission stop time of DNC (from reception to transmission)",0,0],["DNC21","DNC21",null,"NC transmission stop time of DNC (from transmission to transmission)",0,0],["DNC25","DNC25",null,"DNC bit settings (7 bits)",0,0],["DNC25","DNC25",0,"Type of processing to be executed if the tool quantity data within the NC memory mismatches that which has been transferred from the DNC memory",0,0],["DNC25","DNC25",2,"Handling of tool data and tool files in the M PLUS format, valid/invalid",0,0],["DNC26","DNC26",null,"DNC bit settings (8 bits)",0,0],["DNC26","DNC26",0,"After program reception, a search is made/not made for the work number of that program.",0,0],["DNC26","DNC26",1,"Details of an alarm occurring in DNC are displayed or not.",0,0],["DNC26","DNC26",2,"Loading of programs having the same work number as that of the registered program in NC becomes impossible or not.",0,0],["DNC26","DNC26",3,"The function of the PROGRAM LOCK/ ENABLE switch is released or not.",0,0],["DNC26","DNC26",5,"Three digit G-format and G10 format codes input/output for MAZAK data transfer protocol",0,0],["DNC26","DNC26",6,"Binary to ASCII format input/output of MAZAK data transfer protocol",0,0],["DNC26","DNC26",7,"All programs having work numbers smaller than No. 9000 are erased/not erased at the start of program reception.",0,0],["DNC27","DNC27",null,"DNC bit settings (1 bit)",0,0],["DNC27","DNC27",0,"Interpretation of message for DNC macro variable transmission",0,0],["DNC29","DNC29",null,"Number of retry times with detection of a physical error",0,0],["DNC30","DNC30",null,"Tool data/tool file message format",0,0],["DNC31","DNC31",null,"Waiting time for a response from the COM port driver",0,0],["DPR1","DPR1",null,"Baud rate",1,0],["DPR2","DPR2",null,"Stop bit",1,0],["DPR4","DPR4",null,"Data bit",1,0],["DPR8","DPR8",null,"ISO code CR output and the output file size",1,0],["DPR9","DPR9",null,"Method of handshaking",1,0],["DPR10","DPR10",null,"DC code parity",1,0],["DPR11","DPR11",null,"Feed section DC code output",1,0],["DPR12","DPR12",null,"Waiting time",1,0],["DPR13","DPR13",null,"Output format",1,0],["DPR14","DPR14",null,"Selection of an output destination port",1,0],["DPR15","DPR15",null,"Number of characters or the number of lines in feed section",1,0],["IOP2","IOP2",null,"OTHER bit settings (2 bits)",1,0],["IOP2","IOP2",0,"Handling of TPC data when loading programs created with the MATRIX series",1,0],["IOP2","IOP2",1,"Handling of TPC data when loading programs created with the MATRIX series",1,0],["IOP4","IOP4",null,"OTHER bit settings (4 bits)",1,0],["IOP4","IOP4",0,"Mazak data library function",1,0],["IOP4","IOP4",1,"Outputting of Version.txt at saving on the DATA I/O display",1,0],["IOP4","IOP4",2,"Parameter load error prevention function",1,0],["IOP4","IOP4",3,"Overwriting registration judgment criteria when entering tool data text with machines allowing registration of multiple tools",1,0],["IOP5","IOP5",null,"OTHER bit settings (4 bits)",1,0],["IOP5","IOP5",1,"Tool data count check during tool data loading",1,0],["IOP5","IOP5",2,"Selection of the sign for the start point Z of point machining (XC, XY mode) when loading a Z offset scheme program",1,0],["IOP5","IOP5",6,"Overwriting associated with loading of the program of the same work number",1,0],["IOP5","IOP5",7,"Overwriting associated with loading of the tool model of the same name",1,0],["IOP6","IOP6",null,"OTHER bit settings (5 bits)",1,0],["IOP6","IOP6",1,"Program name change upon program conversion",1,0],["IOP6","IOP6",2,"Adding comments to the converted blocks upon EIA conversion",1,0],["IOP6","IOP6",3,"EIA-compatible conversion menu display",1,0],["IOP6","IOP6",4,"Commenting out blocks containing variable numbers and operators upon EIA conversion",1,0],["IOP6","IOP6",5,"Commenting out T-command blocks upon EIA conversion",1,0],["IOP7","IOP7",null,"OTHER bit settings (8 bits)",1,0],["IOP7","IOP7",0,"Serial port used for communication with the magazine-side display unit",1,0],["IOP7","IOP7",1,"Serial port used for communication with the magazine-side display unit",1,0],["IOP7","IOP7",2,"Fixed value",1,0],["IOP7","IOP7",3,"Fixed value",1,0],["IOP7","IOP7",4,"(Magazine-side display unit) ID amplifier type",1,0],["IOP7","IOP7",5,"(Magazine-side display unit) ID amplifier type",1,0],["IOP7","IOP7",6,"(Magazine-side display unit) Tool mounting/removing timing",1,0],["IOP7","IOP7",7,"(Magazine-side display unit) Tool mounting/removing timing",1,0],["IOP8","IOP8",null,"OTHER bit settings (3 bits)",1,0],["IOP8","IOP8",0,"(Magazine-side display unit IN/OUT) Tool count/time data clear setting",1,0],["IOP8","IOP8",1,"(Magazine-side display unit IN/OUT) Tool life count/time data clear setting",1,0],["IOP8","IOP8",3,"B-axis tilt table compatible program conversion menu",1,0],["IOP9","IOP9",null,"Fixed value (0)",1,0],["IOP13","IOP13",null,"Mazak data library function: Connection port number",1,0],["IOP14","IOP14",null,"MAZA-CARE function",1,0],["TAP1","TAP1",null,"Type of terminator",2,0],["TAP2","TAP2",null,"Terminator code 1",2,0],["TAP3","TAP3",null,"Terminator code 2",2,0],["TAP4","TAP4",null,"Output of CR during ISO code punching",2,0],["TAP5","TAP5",null,"DC code parity",2,0],["TAP6","TAP6",null,"Feed section DC code output",2,0],["TAP7","TAP7",null,"DSR output flow control selection",2,0],["TAP9","TAP9",null,"“[” code for paper tape reader/puncher for EIA",2,0],["TAP10","TAP10",null,"“]” code for paper tape reader/puncher for EIA",2,0],["TAP11","TAP11",null,"“#” code for paper tape reader/puncher for EIA",2,0],["TAP12","TAP12",null,"“” code for paper tape reader/puncher for EIA",2,0],["TAP13","TAP13",null,"“=” code for paper tape reader/puncher for EIA",2,0],["TAP14","TAP14",null,"“:” code for paper tape reader/puncher for EIA",2,0],["TAP15","TAP15",null,"“(” code for paper tape reader/puncher for EIA",2,0],["TAP16","TAP16",null,"“)” code for paper tape reader/puncher for EIA",2,0],["TAP25","TAP25",null,"Paper tape puncher parity-V check",2,0],["TAP26","TAP26",null,"TAPE bit settings (6 bits)",2,0],["TAP26","TAP26",0,"Data transfer of a paper tape program which has been punched by M2",2,0],["TAP26","TAP26",1,"Types of data to be punched onto paper tape during all punching",2,0],["TAP26","TAP26",2,"Input/output of the program name during paper tape reading/punching",2,0],["TAP26","TAP26",3,"Number of digits of work No. output",2,0],["TAP26","TAP26",4,"Input/output of material data during punching/reading",2,0],["TAP26","TAP26",5,"Setup data to add when outputting an EIA/ISO program through tape I/O",2,0],["TAP27","TAP27",null,"Bit parameter related to program end code (M) for paper tape reader",2,0],["TAP29","TAP29",null,"Number of characters in feed section for paper tape puncher",2,0],["TAP30","TAP30",null,"Number of characters in the space between O-number and program for paper tape puncher",2,0],["S3","S3",null,"Feed forward gain for the MAZAK Precision Rapid Boring Tornado Option",3,1],["S4","S4",null,"Feed forward gain",3,1],["S5","S5",null,"Rotational center of the table",3,1],["S6","S6",null,"Absolute position detection parameter",3,1],["S7","S7",null,"Upper limit (on Z-axis) of machining range for table rotating machining ",3,1],["S8","S8",null,"Feed-forward gain G00",3,1],["S10","S10",null,"Axis of rotation of the tilting table",3,1],["S11","S11",null,"Corner position of the tilting table",3,1],["S12","S12",null,"Axis of rotation of the tilting table (Used for the automatic program origin calculation function)",3,1],["S13","S13",null,"G00 in-position width",3,1],["S14","S14",null,"G01 in-position width",3,1],["S15","S15",null,"Fixed value",3,1],["S16","S16",null,"Unbalanced axis torque offset",3,1],["S17","S17",null,"Torque limit buffer reduction ratio 1",3,1],["S18","S18",null,"Torque limit buffer reduction ratio 2",3,1],["S19","S19",null,"Tool change completion position of the long boring bar end tool",3,1],["S20","S20",null,"APC completion position",3,1],["S21","S21",null,"Completion position of gantry robot operation",3,1],["S22","S22",null,"Cutting feed clamping speed during tool tip point control",3,1],["S23","S23",null,"Reference workpiece zero point",3,1],["S24","S24",null,"Long milling tool ATC complete position",3,1],["S25","S25",null,"Central position on the upper surface of the tilt table (VARIAXIS) Central position of table upper surface (other machining centers)",3,1],["S26","S26",null,"Central position of tilt table rotation (VARIAXIS)",3,1],["S27","S27",null,"Ram spindle offset amount",3,1],["S28","S28",null,"Center of the workpiece to be directly mounted on the table of the machines equipped with an additional table",3,1],["S29","S29",null,"Position of the work hand rotating axis in relation to the machine zero point",3,1],["S30","S30",null,"Distance from the axis of rotation of the work hand to the reference position of the vice for the work hand",3,1],["S31","S31",null,"Specification of the machine coordinates of the floating reference point",3,1],["S32","S32",null,"Rapid traverse speed for the mode of tool tip point control",3,1],["S33","S33",null,"Reference position X for the TEACH function, to be used for setting the LENGTH B item of an angular tool (For machines of five-surface machining by angular tools)",3,1],["S34","S34",null,"Amount of offset for rotary head misalignment (only for Maza-Check)",3,1],["S35","S35",null,"Rotational center of the second table",3,1],["S36","S36",null,"Position of the center of the second additional table on the VIRTUAL MACHINING display",3,1],["S38","S38",null,"Time-out period for releasing the emergency stop status during powering on",3,1],["S39","S39",null,"Turning spindle number of the table control mechanism that features switching of servo C-axis and turning spindle",3,1],["S40","S40",null,"Offset amount from the turning spindle 0position to the servo C-axis machine zero point",3,1],["S45","S45",null,"ANOTHER bit settings (3 bits)",3,1],["S45","S45",0,"Non-target axis setting for indexing unit (rotational axis)",3,1],["S45","S45",1,"Setting of an axis not displayed on the counter",3,1],["S45","S45",2,"Rapid feed overlapping function disabled axis",3,1],["S49","S49",null,"Rapid feed overlapping function: G0 in-position width",3,1],["S50","S50",null,"Rapid feed overlapping function: G1 in-position width",3,1],["S51","S51",null,"Distance to the small-diameter table",3,1],["S52","S52",null,"Rapid feed overlap function G0 in-position width (for tool tip point control and cutting point command)",3,1],["S53","S53",null,"Rapid feed overlap function G1 in-position width (for tool tip point control and cutting point command)",3,1],["S70","S70",null,"Fixed value",3,1],["S71","S71",null,"ANOTHER bit settings (1 bit)",3,1],["S71","S71",0,"Smart safety monitoring alarm (for servo axis)",3,1],["BA1","BA1",null,"Chuck outside diameter (for chuck barrier) — No. 1 turning spindle",4,1],["BA2","BA2",null,"Chuck width (for chuck barrier) — No. 1 turning spindle",4,1],["BA3","BA3",null,"Chuck inside diameter (for chuck barrier) — No. 1 turning spindle",4,1],["BA4","BA4",null,"EIA program workpiece outside diameter",4,1],["BA5","BA5",null,"Chuck outside diameter (for chuck barrier) — No. 2 turning spindle",4,1],["BA6","BA6",null,"Chuck width (for chuck barrier) — No. 2 turning spindle",4,1],["BA7","BA7",null,"Chuck inside diameter (for chuck barrier) — No. 2 turning spindle",4,1],["BA8","BA8",null,"Tail body outside diameter (for tail barrier)",4,1],["BA9","BA9",null,"Tail body length (for tail barrier)",4,1],["BA10","BA10",null,"Tail spindle outside diameter (for tail barrier)",4,1],["BA11","BA11",null,"Length with tail spindle at back end (for tail barrier)",4,1],["BA12","BA12",null,"Tail head outside diameter (for tail barrier)",4,1],["BA13","BA13",null,"Tail head length (for tail barrier)",4,1],["BA14","BA14",null,"Tail head taper angle (for tail barrier)",4,1],["BA15","BA15",null,"Tail head biting diameter (for tail barrier)",4,1],["BA16","BA16",null,"Tail barrier, tail extruding length",4,1],["BA16-BA18","BA16-BA18",null,"EIA tail barrier Tail dimensions",4,1],["BA17","BA17",null,"Tail barrier, workpiece length",4,1],["BA18","BA18",null,"Tail barrier, tail reversing position Z",4,1],["BA19","BA19",null,"Distance from the Z-axis machine zero point to the spindle edge — No. 1 turning spindle",4,1],["BA20","BA20",null,"Distance from the Z-axis machine zero point to the spindle edge — No. 2 turning spindle",4,1],["BA21","BA21",null,"Jaw number for EIA program barrier — No. 1 turning spindle",4,1],["BA22","BA22",null,"Jaw number for EIA program barrier — No. 2 turning spindle",4,1],["BA23","BA23",null,"Turret outside diameter (turret type tool post)",4,1],["BA24","BA24",null,"Turret width (turret type tool post)",4,1],["BA25","BA25",null,"Turret reference position X (turret type tool post)",4,1],["BA26","BA26",null,"Turret reference position Z (turret type tool post)",4,1],["BA27","BA27",null,"Tool holder mounting position — Type 1",4,1],["BA28","BA28",null,"Tool holder width in X-axis direction — Type 1",4,1],["BA29","BA29",null,"Tool holder width in Z-axis direction — Type 1",4,1],["BA30","BA30",null,"Tool holder mounting position — Type 2",4,1],["BA31","BA31",null,"Tool holder width in X-axis direction — Type 2",4,1],["BA32","BA32",null,"Tool holder width in Z-axis direction — Type 2",4,1],["BA33","BA33",null,"Tool holder mounting position — Type 3",4,1],["BA34","BA34",null,"Tool holder width in X-axis direction — Type 3",4,1],["BA35","BA35",null,"Tool holder width in Z-axis direction BA29 - Type 1 BA32 - Type 2 BA35 - Type 3 BA38 - Type 4",4,1],["BA36","BA36",null,"Tool holder mounting position — Type 4",4,1],["BA37","BA37",null,"Tool holder width in X-axis direction — Type 4",4,1],["BA38","BA38",null,"Tool holder width in Z-axis direction — Type 4",4,1],["BA39","BA39",null,"EIA tool barrier, tool holder mounting position",4,1],["BA39-BA41","BA39-BA41",null,"EIA tool barrier Holder dimensions",4,1],["BA40","BA40",null,"EIA tool barrier, tool holder width X",4,1],["BA41","BA41",null,"EIA tool barrier, tool holder width Z",4,1],["BA42","BA42",null,"Barrier type",4,1],["BA43","BA43",null,"First tool number (in the 1st set of tools)",4,1],["BA44","BA44",null,"Number of tools (in the 1st set of tools)",4,1],["BA45","BA45",null,"First tool number (in the 2nd set of tools)",4,1],["BA46","BA46",null,"Number of tools (in the 2nd set of tools)",4,1],["BA47","BA47",null,"Turret type",4,1],["BA48","BA48",null,"Axis name of the head to be rotated",4,1],["BA49","BA49",null,"Axis number of the inclined axis",4,1],["BA50","BA50",null,"Fundamental axis number",4,1],["BA51","BA51",null,"Inclined-axis control, vector of virtual Y",4,1],["BA52","BA52",null,"Inclined-axis control, vector of real X",4,1],["BA53","BA53",null,"Inclined-axis control, vector of real Y",4,1],["BA54","BA54",null,"Selection of work spindle for hobbing",4,1],["BA55","BA55",null,"Turning spindle number for polygonal machining (D1)",4,1],["BA56","BA56",null,"Turning spindle number for polygonal machining (D2)",4,1],["BA57","BA57",null,"Turning spindle number for polygonal machining (D3)",4,1],["BA58","BA58",null,"Turning spindle number for polygonal machining (D4)",4,1],["BA59","BA59",null,"Spindle forward rotation M-code for tapping cycle",4,1],["BA60","BA60",null,"Spindle reverse rotation M-code for tapping cycle",4,1],["BA61","BA61",null,"Amount of runout of the B-axis center",4,1],["BA62","BA62",null,"Amount of offset for the B-axis — spindle distance",4,1],["BA63","BA63",null,"Holder angle of angle tool holder",4,1],["BA64","BA64",null,"B-axis tool reference position X",4,1],["BA65","BA65",null,"B-axis tool reference position Z",4,1],["BA66","BA66",null,"Deceleration area Z",4,1],["BA67","BA67",null,"Measuring area Z",4,1],["BA68","BA68",null,"Deceleration area X",4,1],["BA69","BA69",null,"Measuring area X",4,1],["BA70","BA70",null,"Distance between the reference points on both turrets",4,1],["BA71","BA71",null,"System number to be used when argument L is omitted from G112",4,1],["BA72","BA72",null,"Feed override for retracting the tap",4,1],["BA73","BA73",null,"Barrier valid/invalid 1 (chuck, sub-chuck, tailstock)",4,1],["BA74","BA74",null,"Barrier valid/invalid 2 (Lower turret, steady rest)",4,1],["BA75-BA78","BA75-BA78",null,"Barrier setup turret reference position",4,1],["BA79-BA82","BA79-BA82",null,"Barrier setup chuck reference position 1",4,1],["BA83-BA86","BA83-BA86",null,"Barrier setup chuck reference position 2",4,1],["BA87-BA90","BA87-BA90",null,"Barrier reference position for a powered tailstock",4,1],["BA91","BA91",null,"Distance from spindle edge to partition plate",4,1],["BA92","BA92",null,"Central position X when viewed from machine zero point",4,1],["BA93","BA93",null,"Upper/lower turret tool angle difference (HD1)",4,1],["BA94","BA94",null,"Upper/lower turret tool angle difference (HD2)",4,1],["BA95","BA95",null,"Tool nose measurement, sensor width along the X-axis",4,1],["BA96","BA96",null,"Tool nose measurement, sensor width along the Z-axis",4,1],["BA97","BA97",null,"Tool nose measurement, X-coordinate of the sensor’s reference point",4,1],["BA98","BA98",null,"Tool nose measurement, Y-coordinate of the sensor’s reference point",4,1],["BA99","BA99",null,"Tool nose measurement, Z-coordinate of the sensor’s reference point",4,1],["BA100","BA100",null,"Tool nose measurement, X-coordinate of the sensor’s reference point (for lower turret/HD2)",4,1],["BA101","BA101",null,"BA98: Y-coordinate of the sensor’s reference point BA101: Y-coordinate of the sensor’s reference point (for lower turret/HD2)",4,1],["BA102","BA102",null,"Tool nose measurement, Z-coordinate of the sensor’s reference point (for lower turret/HD2)",4,1],["BA103","BA103",null,"Tool nose measurement, sensor width along the X-axis (for lower turret/HD2)",4,1],["BA104","BA104",null,"Tool nose measurement, sensor width along the Z-axis (for lower turret/HD2)",4,1],["BA105","BA105",null,"Adjustment “FdT” for servo axis thrust hold",4,1],["BA106","BA106",null,"Dead zone",4,1],["BA107","BA107",null,"Filter",4,1],["BA108","BA108",null,"Servo axis thrust hold droop",4,1],["BA109","BA109",null,"Offset amount (X) during automatic tool setting value calculation",4,1],["BA110","BA110",null,"Offset amount (Z) during automatic tool setting value calculation",4,1],["BA111","BA111",null,"Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code (M881)",4,1],["BA111-BA116","BA111-BA116",null,"Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code command BA111: For M881 command BA112: For M882 command BA113: For M883 command BA114: For M884 command BA115: For M885 command BA116: For M886 command",4,1],["BA112","BA112",null,"Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code (M882)",4,1],["BA113","BA113",null,"Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code (M883)",4,1],["BA114","BA114",null,"Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code (M884)",4,1],["BA115","BA115",null,"Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code (M885)",4,1],["BA116","BA116",null,"Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code (M886)",4,1],["BA117","BA117",null,"Outside diameter of the turret for Virtual Machining",4,1],["BA118","BA118",null,"Width of the turret for Virtual Machining",4,1],["BA119","BA119",null,"Selecting a head having a lower-turret TOOL EYE",4,1],["BA120","BA120",null,"Mounting position X for an assembly tool model",4,1],["BA121","BA121",null,"Mounting position Z for an assembly tool model",4,1],["BA122","BA122",null,"Turret reference position X (for VIRTUAL MACHINING or 3D MONITOR display)",4,1],["BA123","BA123",null,"Turret reference position Z (for VIRTUAL MACHINING or 3D MONITOR display)",4,1],["BA124","BA124",null,"Fixed value (0)",4,1],["BA125","BA125",null,"EIA barrier activation",4,1],["BA125","BA125",0,"EIA tailstock barrier, tailstock usage valid/invalid",4,1],["BA125","BA125",1,"Tailstock present/absent",4,1],["BA125","BA125",2,"EIA tool barrier, tool holder present/absent",4,1],["BA125","BA125",4,"Setting of BA11 is handled as tailstock extruding length, valid/invalid",4,1],["BA125","BA125",5,"Output of spindle revolution M-code specified in same block as synchronous tapping, valid/invalid",4,1],["BA125","BA125",6,"Alarm stop when [BARRIER CANCEL] is selected at the start of the automatic operation, valid/invalid",4,1],["BA125","BA125",7,"Alarm stop when jaw Nos. are not specified at the start of the automatic operation, valid/invalid",4,1],["BA126","BA126",null,"BARRIER bit settings (8 bits)",4,1],["BA126","BA126",0,"System to be made valid without system selection for queuing",4,1],["BA126","BA126",1,"Y-axis interference type",4,1],["BA126","BA126",2,"Y-axis moving range display",4,1],["BA126","BA126",3,"Tool command scheme",4,1],["BA126","BA126",4,"FLASH tool valid/invalid",4,1],["BA126","BA126",5,"Milling spindle orientation command (M219), output/no output",4,1],["BA126","BA126",6,"System without turret",4,1],["BA126","BA126",7,"Shape of the tailstock center for Virtual Machining, single stage/twin stage",4,1],["BA127","BA127",null,"BARRIER bit settings (8 bits)",4,1],["BA127","BA127",0,"M249 command for preparing for tool change before moving the tool to the tool change position using a MAZATROL program, output/no output",4,1],["BA127","BA127",1,"For programs of Z-offset scheme: Fixed value (1) For other programs: Invalid",4,1],["BA127","BA127",2,"Simultaneous output of TTM6M200 and TTM6M202",4,1],["BA127","BA127",3,"NC tailstock (servo axis thrust control)",4,1],["BA127","BA127",4,"M90/M91 output for machines with turret",4,1],["BA127","BA127",5,"Type of the clamping and unclamping M-codes that the NC automatically output for machines equipped with a spindle head of swiveling type",4,1],["BA127","BA127",7,"Whether or not to read the current settings (tailstock position) on the SET UP MANAG. display at the beginning of the execution of each program",4,1],["BA128","BA128",null,"BARRIER bit settings (8 bits)",4,1],["BA128","BA128",0,"NC tailstock pushing direction",4,1],["BA128","BA128",1,"Method of automatic determination of the virtual nose point for a tool measuring unit",4,1],["BA128","BA128",2,"Display of THRUST F. and HORSE PW for the AFC function in the first set of tool data (BA43, BA44)",4,1],["BA128","BA128",3,"Display of THRUST F. and HORSE PW for the AFC function in the second set of tool data (BA45, BA46)",4,1],["BA128","BA128",4,"TOOL EYE measurement approach selection with turret-equipped machines",4,1],["BA128","BA128",5,"Hobbing on the machine without tool rotary axis or table tilt axis",4,1],["BA128","BA128",6,"Turret lathe with an ATC unit",4,1],["BA128","BA128",7,"Display of [TURRET UNCLAMP] for machines with an ATC-type turret",4,1],["BA129","BA129",null,"BARRIER bit settings (7 bits)",4,1],["BA129","BA129",0,"Output of tool change preparation M code (M109/M249) when executing tool change",4,1],["BA129","BA129",1,"Fixed value",4,1],["BA129","BA129",2,"Fixed G0 inclination control in the G68/G68.5 mode",4,1],["BA129","BA129",3,"Selection of whether or not to measure the milling tool length with the tool measuring unit",4,1],["BA129","BA129",4,"Display of [BARRIER CANCEL] with [BARRIER CANCEL TEACH] selected",4,1],["BA129","BA129",5,"Handling of measurement speed of 1 in/min or higher during laser tool length/diameter measurement with inch-specification machines",4,1],["BA129","BA129",7,"Planetary tapping in the MAZATROL rear XY mode",4,1],["BA130","BA130",null,"BARRIER bit settings (1 bit)",4,1],["BA130","BA130",1,"Fixed value",4,1],["BA131","BA131",null,"BARRIER bit settings (4 bits)",4,1],["BA131","BA131",0,"Multi-magazine number display",4,1],["BA131","BA131",1,"Tool length C input, valid/invalid",4,1],["BA131","BA131",5,"Switching of the approach pattern in TOOL EYE measurement (MAZATROL program)",4,1],["BA131","BA131",7,"Fixed value (0)",4,1],["BA241","BA241",null,"Hobbing (position controlled hobbing) Hobbing axis allocation",4,1],["J1-J40","J1-J40",null,"G-code macroprogram call",5,1],["J1","J1",null,"J29 J33 100009590 100009599100009401 J9 J13 J17 J21 J25 (Fixed (Fixed value) value) J30 J34 136 137 J10 J14 J18 J22 J26 (Fixed (Fixed value) value) J31 J35 1 1 J11 J15 J19 J23 J27 (Fixed (Fixed value) value) J12 J16 J20 J24 J28 J32 J36",5,1],["J2","J2",null,"J29 J33 100009590 100009599100009401 J9 J13 J17 J21 J25 (Fixed (Fixed value) value) J30 J34 136 137 J10 J14 J18 J22 J26 (Fixed (Fixed value) value) J31 J35 1 1 J11 J15 J19 J23 J27 (Fixed (Fixed value) value) J12 J16 J20 J24 J28 J32 J36",5,1],["J3","J3",null,"J29 J33 100009590 100009599100009401 J9 J13 J17 J21 J25 (Fixed (Fixed value) value) J30 J34 136 137 J10 J14 J18 J22 J26 (Fixed (Fixed value) value) J31 J35 1 1 J11 J15 J19 J23 J27 (Fixed (Fixed value) value) J12 J16 J20 J24 J28 J32 J36",5,1],["J4","J4",null,"J29 J33 100009590 100009599100009401 J9 J13 J17 J21 J25 (Fixed (Fixed value) value) J30 J34 136 137 J10 J14 J18 J22 J26 (Fixed (Fixed value) value) J31 J35 1 1 J11 J15 J19 J23 J27 (Fixed (Fixed value) value) J12 J16 J20 J24 J28 J32 J36",5,1],["J5","J5",null,"J29 J33 100009590 100009599100009401 J9 J13 J17 J21 J25 (Fixed (Fixed value) value) J30 J34 136 137 J10 J14 J18 J22 J26 (Fixed (Fixed value) value) J31 J35 1 1 J11 J15 J19 J23 J27 (Fixed (Fixed value) value) J12 J16 J20 J24 J28 J32 J36",5,1],["J6","J6",null,"J29 J33 100009590 100009599100009401 J9 J13 J17 J21 J25 (Fixed (Fixed value) value) J30 J34 136 137 J10 J14 J18 J22 J26 (Fixed (Fixed value) value) J31 J35 1 1 J11 J15 J19 J23 J27 (Fixed (Fixed value) value) J12 J16 J20 J24 J28 J32 J36",5,1],["J7","J7",null,"J29 J33 100009590 100009599100009401 J9 J13 J17 J21 J25 (Fixed (Fixed value) value) J30 J34 136 137 J10 J14 J18 J22 J26 (Fixed (Fixed value) value) J31 J35 1 1 J11 J15 J19 J23 J27 (Fixed (Fixed value) value) J12 J16 J20 J24 J28 J32 J36",5,1],["J8","J8",null,"J29 J33 100009590 100009599100009401 J9 J13 J17 J21 J25 (Fixed (Fixed value) value) J30 J34 136 137 J10 J14 J18 J22 J26 (Fixed (Fixed value) value) J31 J35 1 1 J11 J15 J19 J23 J27 (Fixed (Fixed value) value) J12 J16 J20 J24 J28 J32 J36",5,1],["J41-J80","J41-J80",null,"M-code macroprogram call (J44, J48, J52, J56, J60: Parameter for system internal setting Setting prohibited)",5,1],["J41","J41",null,"J45 J49 J53 J57 100000091 100000092 100000093 100000001 (Fixed value) (Fixed value) (Fixed value) (Fixed J46 J50 J54 J58 91 92 93 153 (Fixed value) (Fixed value) (Fixed value) (Fixed J47 J51 J55 J59 0 0 0 (Fixed value) (Fixed value) (Fixed value) (Fixed J48 J52 J56 J60 0 0 0 (Fixed value) (Fixed value) (Fixed value) (Fixed",5,1],["J42","J42",null,"J45 J49 J53 J57 100000091 100000092 100000093 100000001 (Fixed value) (Fixed value) (Fixed value) (Fixed J46 J50 J54 J58 91 92 93 153 (Fixed value) (Fixed value) (Fixed value) (Fixed J47 J51 J55 J59 0 0 0 (Fixed value) (Fixed value) (Fixed value) (Fixed J48 J52 J56 J60 0 0 0 (Fixed value) (Fixed value) (Fixed value) (Fixed",5,1],["J43","J43",null,"J45 J49 J53 J57 100000091 100000092 100000093 100000001 (Fixed value) (Fixed value) (Fixed value) (Fixed J46 J50 J54 J58 91 92 93 153 (Fixed value) (Fixed value) (Fixed value) (Fixed J47 J51 J55 J59 0 0 0 (Fixed value) (Fixed value) (Fixed value) (Fixed J48 J52 J56 J60 0 0 0 (Fixed value) (Fixed value) (Fixed value) (Fixed",5,1],["J44","J44",null,"J45 J49 J53 J57 100000091 100000092 100000093 100000001 (Fixed value) (Fixed value) (Fixed value) (Fixed J46 J50 J54 J58 91 92 93 153 (Fixed value) (Fixed value) (Fixed value) (Fixed J47 J51 J55 J59 0 0 0 (Fixed value) (Fixed value) (Fixed value) (Fixed J48 J52 J56 J60 0 0 0 (Fixed value) (Fixed value) (Fixed value) (Fixed",5,1],["J61","J61",null,"J65 J69 J73 J77 J66 J70 J74 J78 J67 J71 J75 J79 J68 J72 J76 J80",5,1],["J62","J62",null,"J65 J69 J73 J77 J66 J70 J74 J78 J67 J71 J75 J79 J68 J72 J76 J80",5,1],["J63","J63",null,"J65 J69 J73 J77 J66 J70 J74 J78 J67 J71 J75 J79 J68 J72 J76 J80",5,1],["J64","J64",null,"J65 J69 J73 J77 J66 J70 J74 J78 J67 J71 J75 J79 J68 J72 J76 J80",5,1],["J89-J107","J89-J107",null,"Parameter for system internal setting Setting prohibited",5,1],["J108","J108",null,"Maximum number of retrials to update the model with the SAFETY SHIELD function",5,1],["J109-J112","J109-J112",null,"Barrier setup chuck reference position 1 on the No. 2 spindle side/NC tailstock position",5,1],["J113-J116","J113-J116",null,"Barrier setup chuck reference position 2 on the No. 2 spindle side",5,1],["J119-J120","J119-J120",null,"Barrier-setting/cancelling M-code to be used for barrier teaching",5,1],["J119","J119",null,"Barrier-setting/cancelling M-code to be used for barrier teaching",5,1],["J120","J120",null,"Barrier-setting/cancelling M-code to be used for barrier teaching",5,1],["J121","J121",null,"Amount of offset for height axis rotational center offset (K124, K128) of the rotary axis for the tool (tool tip point control)",5,1],["J124","J124",null,"M codes for SPRINT control [Option]",5,1],["J125-J126","J125-J126",null,"SPRINT control enable signal ON/OFF delay time [Option]",5,1],["J125","J125",null,"SPRINT control enable signal ON/OFF delay time [Option]",5,1],["J126","J126",null,"SPRINT control enable signal ON/OFF delay time [Option]",5,1],["J127","J127",null,"SPRINT control start signal assigned device [Option]",5,1],["J128","J128",null,"SPRINT control select signal assigned device [Option]",5,1],["J130","J130",null,"Z-axis stroke for the teaching of lower turret tool",5,1],["J131-J140","J131-J140",null,"Setting the M-code for making the INTELLIGENT SAFETY SHIELD function valid/invalid during automatic operation",5,1],["J141","J141",null,"Selecting whether to output the M-code for making the INTELLIGENT SAFETY SHIELD function valid/invalid during automatic operation",5,1],["J142","J142",null,"CALL MACRO bit settings (4 bits)",5,1],["J142","J142",0,"Selecting whether to output the M-code for making the INTELLIGENT SAFETY SHIELD function valid/invalid during automatic operation",5,1],["J142","J142",1,"Selecting whether to output the M-code for making the INTELLIGENT SAFETY SHIELD function valid/invalid during automatic operation",5,1],["J142","J142",2,"Output selection of M codes for temporarily disabling/canceling disabled status of INTELLIGENT SAFETY SHIELD function in automatic operation",5,1],["J142","J142",3,"Output selection of M codes for temporarily disabling/canceling disabled status of INTELLIGENT SAFETY SHIELD function in automatic operation",5,1],["J143","J143",null,"CALL MACRO bit settings (7 bits)",5,1],["J143","J143",0,"Method to handle the tool offset data when the program is returned to a MAZATROL program with the tool offset function set valid in an EIA/ISO subprogram",5,1],["J143","J143",1,"Selection of the lower turret tool teaching data input method",5,1],["J143","J143",2,"In reference point return operation (G28, G30, G30.1), tool change command is executed with or without waiting the completion of middle-point return",5,1],["J143","J143",3,"Fixed value",5,1],["J143","J143",4,"Fixed value",5,1],["J143","J143",5,"Modal at power-on or at reset (G23/G22)",5,1],["J144","J144",null,"CALL MACRO bit settings (2 bits)",5,1],["J144","J144",0,"Tool interference check type",5,1],["J144","J144",2,"Tool life data overwrite during automatic operation",5,1],["J145-J184","J145-J184",null,"M-code macroprogram call",5,1],["J145","J145",null,"J153 J157 J161 J165 J169 J173 J177 J154 J158 J162 J166 J170 J174 J178 J155 J159 J163 J167 J171 J175 J179 J156 J160 J164 J168 J172 J176 J180",5,1],["J146","J146",null,"J153 J157 J161 J165 J169 J173 J177 J154 J158 J162 J166 J170 J174 J178 J155 J159 J163 J167 J171 J175 J179 J156 J160 J164 J168 J172 J176 J180",5,1],["J147","J147",null,"J153 J157 J161 J165 J169 J173 J177 J154 J158 J162 J166 J170 J174 J178 J155 J159 J163 J167 J171 J175 J179 J156 J160 J164 J168 J172 J176 J180",5,1],["J148","J148",null,"J153 J157 J161 J165 J169 J173 J177 J154 J158 J162 J166 J170 J174 J178 J155 J159 J163 J167 J171 J175 J179 J156 J160 J164 J168 J172 J176 J180",5,1],["J149","J149",null,"J153 J157 J161 J165 J169 J173 J177 J154 J158 J162 J166 J170 J174 J178 J155 J159 J163 J167 J171 J175 J179 J156 J160 J164 J168 J172 J176 J180",5,1],["J150","J150",null,"J153 J157 J161 J165 J169 J173 J177 J154 J158 J162 J166 J170 J174 J178 J155 J159 J163 J167 J171 J175 J179 J156 J160 J164 J168 J172 J176 J180",5,1],["J151","J151",null,"J153 J157 J161 J165 J169 J173 J177 J154 J158 J162 J166 J170 J174 J178 J155 J159 J163 J167 J171 J175 J179 J156 J160 J164 J168 J172 J176 J180",5,1],["J152","J152",null,"J153 J157 J161 J165 J169 J173 J177 J154 J158 J162 J166 J170 J174 J178 J155 J159 J163 J167 J171 J175 J179 J156 J160 J164 J168 J172 J176 J180",5,1],["J235","J235",null,"Workpiece measurement offset (X-axis offset for OD (both sides), X-axis offset for protrusion width)",5,1],["J236","J236",null,"Workpiece measurement offset (Y-axis offset for OD (both sides), Y-axis offset for protrusion width)",5,1],["J237","J237",null,"Workpiece measurement offset (X-axis offset for ID (both sides), X-axis offset for groove width)",5,1],["J238","J238",null,"Workpiece measurement offset (Y-axis offset for ID (both sides), Y-axis offset for groove width)",5,1],["J239","J239",null,"Workpiece measurement offset (Z-axis offset for protrusion width, offset for ID protrusion width)",5,1],["J240","J240",null,"Workpiece measurement offset (Z-axis offset for groove width, offset for ID groove)",5,1],["J251","J251",null,"Software limit relative position check – Limit distance in the separating direction (1st set of axes)",5,1],["J252","J252",null,"Software limit relative position check – Limit distance in the separating direction (2nd set of axes)",5,1],["J253","J253",null,"Software limit relative position check – Limit distance in the separating direction (3rd set of axes)",5,1],["J254","J254",null,"Software limit relative position check – Limit distance in the separating direction (4th set of axes)",5,1],["J261","J261",null,"CALL MACRO bit settings (3 bits)",5,1],["J261","J261",0,"Arithmetic operation after G code",5,1],["J261","J261",3,"Initial point relay setting for point-machining TPC",5,1],["J261","J261",4,"Method for processing the turning spindle synchronous control selection signal",5,1],["J265-J424","J265-J424",null,"G-code macroprogram call",5,1],["J265","J265",null,"J273 J277 J281 J285 J289 J293 J274 J278 J282 J286 J290 J294 J275 J279 J283 J287 J291 J295 J276 J280 J284 J288 J292 J296",5,1],["J266","J266",null,"J273 J277 J281 J285 J289 J293 J274 J278 J282 J286 J290 J294 J275 J279 J283 J287 J291 J295 J276 J280 J284 J288 J292 J296",5,1],["J267","J267",null,"J273 J277 J281 J285 J289 J293 J274 J278 J282 J286 J290 J294 J275 J279 J283 J287 J291 J295 J276 J280 J284 J288 J292 J296",5,1],["J268","J268",null,"J273 J277 J281 J285 J289 J293 J274 J278 J282 J286 J290 J294 J275 J279 J283 J287 J291 J295 J276 J280 J284 J288 J292 J296",5,1],["J269","J269",null,"J273 J277 J281 J285 J289 J293 J274 J278 J282 J286 J290 J294 J275 J279 J283 J287 J291 J295 J276 J280 J284 J288 J292 J296",5,1],["J270","J270",null,"J273 J277 J281 J285 J289 J293 J274 J278 J282 J286 J290 J294 J275 J279 J283 J287 J291 J295 J276 J280 J284 J288 J292 J296",5,1],["J271","J271",null,"J273 J277 J281 J285 J289 J293 J274 J278 J282 J286 J290 J294 J275 J279 J283 J287 J291 J295 J276 J280 J284 J288 J292 J296",5,1],["J272","J272",null,"J273 J277 J281 J285 J289 J293 J274 J278 J282 J286 J290 J294 J275 J279 J283 J287 J291 J295 J276 J280 J284 J288 J292 J296",5,1],["J345","J345",null,"J353 J357 J361 J365 J369 J373 J354 J358 J362 J366 J370 J374 J355 J359 J363 J367 J371 J375 J356 J360 J364 J368 J372 J376",5,1],["J346","J346",null,"J353 J357 J361 J365 J369 J373 J354 J358 J362 J366 J370 J374 J355 J359 J363 J367 J371 J375 J356 J360 J364 J368 J372 J376",5,1],["J347","J347",null,"J353 J357 J361 J365 J369 J373 J354 J358 J362 J366 J370 J374 J355 J359 J363 J367 J371 J375 J356 J360 J364 J368 J372 J376",5,1],["J348","J348",null,"J353 J357 J361 J365 J369 J373 J354 J358 J362 J366 J370 J374 J355 J359 J363 J367 J371 J375 J356 J360 J364 J368 J372 J376",5,1],["J349","J349",null,"J353 J357 J361 J365 J369 J373 J354 J358 J362 J366 J370 J374 J355 J359 J363 J367 J371 J375 J356 J360 J364 J368 J372 J376",5,1],["J350","J350",null,"J353 J357 J361 J365 J369 J373 J354 J358 J362 J366 J370 J374 J355 J359 J363 J367 J371 J375 J356 J360 J364 J368 J372 J376",5,1],["J351","J351",null,"J353 J357 J361 J365 J369 J373 J354 J358 J362 J366 J370 J374 J355 J359 J363 J367 J371 J375 J356 J360 J364 J368 J372 J376",5,1],["J352","J352",null,"J353 J357 J361 J365 J369 J373 J354 J358 J362 J366 J370 J374 J355 J359 J363 J367 J371 J375 J356 J360 J364 J368 J372 J376",5,1],["J385","J385",null,"J393 J397 J401 J405 J409 J413 J394 J398 J402 J406 J410 J414 J395 J399 J403 J407 J411 J415 J396 J400 J404 J408 J412 J416",5,1],["J386","J386",null,"J393 J397 J401 J405 J409 J413 J394 J398 J402 J406 J410 J414 J395 J399 J403 J407 J411 J415 J396 J400 J404 J408 J412 J416",5,1],["J387","J387",null,"J393 J397 J401 J405 J409 J413 J394 J398 J402 J406 J410 J414 J395 J399 J403 J407 J411 J415 J396 J400 J404 J408 J412 J416",5,1],["J388","J388",null,"J393 J397 J401 J405 J409 J413 J394 J398 J402 J406 J410 J414 J395 J399 J403 J407 J411 J415 J396 J400 J404 J408 J412 J416",5,1],["J389","J389",null,"J393 J397 J401 J405 J409 J413 J394 J398 J402 J406 J410 J414 J395 J399 J403 J407 J411 J415 J396 J400 J404 J408 J412 J416",5,1],["J390","J390",null,"J393 J397 J401 J405 J409 J413 J394 J398 J402 J406 J410 J414 J395 J399 J403 J407 J411 J415 J396 J400 J404 J408 J412 J416",5,1],["J391","J391",null,"J393 J397 J401 J405 J409 J413 J394 J398 J402 J406 J410 J414 J395 J399 J403 J407 J411 J415 J396 J400 J404 J408 J412 J416",5,1],["J392","J392",null,"J393 J397 J401 J405 J409 J413 J394 J398 J402 J406 J410 J414 J395 J399 J403 J407 J411 J415 J396 J400 J404 J408 J412 J416",5,1],["J433-J472","J433-J472",null,"G-code macroprogram call",5,1],["J433","J433",null,"No .2 No. 3 No. 4 No. J441 J445 J449 J453 J457 J461 J442 J446 J450 J454 J458 J462 J443 J447 J451 J455 J459 J463 J444 J448 J452 J456 J460 J464",5,1],["J434","J434",null,"No .2 No. 3 No. 4 No. J441 J445 J449 J453 J457 J461 J442 J446 J450 J454 J458 J462 J443 J447 J451 J455 J459 J463 J444 J448 J452 J456 J460 J464",5,1],["J435","J435",null,"No .2 No. 3 No. 4 No. J441 J445 J449 J453 J457 J461 J442 J446 J450 J454 J458 J462 J443 J447 J451 J455 J459 J463 J444 J448 J452 J456 J460 J464",5,1],["J436","J436",null,"No .2 No. 3 No. 4 No. J441 J445 J449 J453 J457 J461 J442 J446 J450 J454 J458 J462 J443 J447 J451 J455 J459 J463 J444 J448 J452 J456 J460 J464",5,1],["J437","J437",null,"No .2 No. 3 No. 4 No. J441 J445 J449 J453 J457 J461 J442 J446 J450 J454 J458 J462 J443 J447 J451 J455 J459 J463 J444 J448 J452 J456 J460 J464",5,1],["J438","J438",null,"No .2 No. 3 No. 4 No. J441 J445 J449 J453 J457 J461 J442 J446 J450 J454 J458 J462 J443 J447 J451 J455 J459 J463 J444 J448 J452 J456 J460 J464",5,1],["J439","J439",null,"No .2 No. 3 No. 4 No. J441 J445 J449 J453 J457 J461 J442 J446 J450 J454 J458 J462 J443 J447 J451 J455 J459 J463 J444 J448 J452 J456 J460 J464",5,1],["J440","J440",null,"No .2 No. 3 No. 4 No. J441 J445 J449 J453 J457 J461 J442 J446 J450 J454 J458 J462 J443 J447 J451 J455 J459 J463 J444 J448 J452 J456 J460 J464",5,1],["J473-J512","J473-J512",null,"M-code macroprogram call",5,1],["J473","J473",null,"J481 J485 J489 J493 J497 J501 J505 J482 J486 J490 J494 J498 J502 J506 J483 J487 J491 J495 J499 J503 J507 J484 J488 J492 J496 J500 J504 J508",5,1],["J474","J474",null,"J481 J485 J489 J493 J497 J501 J505 J482 J486 J490 J494 J498 J502 J506 J483 J487 J491 J495 J499 J503 J507 J484 J488 J492 J496 J500 J504 J508",5,1],["J475","J475",null,"J481 J485 J489 J493 J497 J501 J505 J482 J486 J490 J494 J498 J502 J506 J483 J487 J491 J495 J499 J503 J507 J484 J488 J492 J496 J500 J504 J508",5,1],["J476","J476",null,"J481 J485 J489 J493 J497 J501 J505 J482 J486 J490 J494 J498 J502 J506 J483 J487 J491 J495 J499 J503 J507 J484 J488 J492 J496 J500 J504 J508",5,1],["J477","J477",null,"J481 J485 J489 J493 J497 J501 J505 J482 J486 J490 J494 J498 J502 J506 J483 J487 J491 J495 J499 J503 J507 J484 J488 J492 J496 J500 J504 J508",5,1],["J478","J478",null,"J481 J485 J489 J493 J497 J501 J505 J482 J486 J490 J494 J498 J502 J506 J483 J487 J491 J495 J499 J503 J507 J484 J488 J492 J496 J500 J504 J508",5,1],["J479","J479",null,"J481 J485 J489 J493 J497 J501 J505 J482 J486 J490 J494 J498 J502 J506 J483 J487 J491 J495 J499 J503 J507 J484 J488 J492 J496 J500 J504 J508",5,1],["J480","J480",null,"J481 J485 J489 J493 J497 J501 J505 J482 J486 J490 J494 J498 J502 J506 J483 J487 J491 J495 J499 J503 J507 J484 J488 J492 J496 J500 J504 J508",5,1],["J513-J530","J513-J530",null,"Parameter for system internal setting Setting prohibited",5,1],["J531","J531",null,"Amount of correction for height axis rotational center offset (K233, K237) of the tool control rotary axis (tool tip point control)",5,1],["J533-J540","J533-J540",null,"For setting SPRINT interface (option), fixed value",5,1],["J550-J551","J550-J551",null,"M code setting for temporarily disabling/canceling disabled status of INTELLIGENT SAFETY SHIELD function in automatic operation",5,1],["M1","M1",null,"Rapid feed rate",6,1],["M2","M2",null,"Feed rate for initial zero-point return",6,1],["M3","M3",null,"Cutting feed rate limit",6,1],["M4","M4",null,"Offset of machine coordinates system",6,1],["M5","M5",null,"Second zero-point coordinating value",6,1],["M6","M6",null,"Third zero-point coordinating value",6,1],["M7","M7",null,"Fourth zero-point coordinating value",6,1],["M8","M8",null,"Maximum software limit specified by manufacturer (+ direction)",6,1],["M9","M9",null,"Maximum software limit specified by manufacturer (– direction)",6,1],["M10","M10",null,"Command unit",6,1],["M11","M11",null,"Coding of address of axis",6,1],["M12","M12",null,"Coding of incremental axis",6,1],["M13","M13",null,"Axis name (for display)",6,1],["M14","M14",null,"Shifting distance of the watchdog-less home position",6,1],["M15","M15",null,"Axis name (for axis name changing)",6,1],["M16","M16",null,"Zero-point shift amount/grid shift amount",6,1],["M17","M17",null,"Axis control flag",6,1],["M17","M17",1,"Unit of output from MCP to servo amplifier",6,1],["M17","M17",2,"Direction of machine zero-point return",6,1],["M17","M17",3,"Error correction schema with servo on",6,1],["M17","M17",4,"Type of axis",6,1],["M17","M17",5,"Rotational direction of servo motor (for movement in (+) direction)",6,1],["M17","M17",7,"Alarm/No alarm with axis removed",6,1],["M18","M18",null,"FEED VEL. bit settings (7 bits)",6,1],["M18","M18",0,"Spindle C-axis",6,1],["M18","M18",2,"Machine zero-point position",6,1],["M18","M18",3,"Virtual axis with dog",6,1],["M18","M18",4,"Dog-less axis",6,1],["M18","M18",5,"X-axis current position display in radius/diameter",6,1],["M18","M18",6,"Automatic/manual simultaneous absolute-value updating",6,1],["M18","M18",7,"Absolute-value detection",6,1],["M19","M19",null,"FEED VEL. bit settings (5 bits)",6,1],["M19","M19",0,"Transmission of rapid feed rate value to SV69/SV70",6,1],["M19","M19",3,"In-position checking method",6,1],["M19","M19",4,"Parameter for system internal setting Setting prohibited",6,1],["M19","M19",5,"Zero-point operation starting position check",6,1],["M19","M19",7,"Backlash scheme to be adopted for dog-type returning to zero point",6,1],["M20","M20",null,"FEED VEL. bit settings (8 bits)",6,1],["M20","M20",0,"Rotational direction of the rotation axis (Dynamic offset )",6,1],["M20","M20",1,"KOMET tool axis specification",6,1],["M20","M20",2,"Method of jog/rapid feed stopping when the INTELLIGENT SAFETY SHIELD is valid",6,1],["M20","M20",3,"Current position display of NC steady rest axis",6,1],["M20","M20",4,"Warning check for alarm 67 HI-SPEED SYNCTAP AXIS ALARM",6,1],["M20","M20",5,"Multi-axis integrated type amplifier specification",6,1],["M20","M20",6,"Switching between zero-point shift amount and grid shift amount",6,1],["M20","M20",7,"GL-axis specification",6,1],["M21","M21",null,"FEED VEL. bit settings (8 bits)",6,1],["M21","M21",0,"Rapid-feed acceleration/deceleration type, Linear acceleration/deceleration",6,1],["M21","M21",1,"Rapid-feed acceleration/deceleration type, First-order lag",6,1],["M21","M21",2,"Rapid-feed acceleration/deceleration type, Second-order lag",6,1],["M21","M21",3,"Rapid-feed acceleration/deceleration type, Exponential acceleration/linear deceleration",6,1],["M21","M21",4,"Cutting-feed acceleration/deceleration type, Linear acceleration/deceleration",6,1],["M21","M21",5,"Cutting-feed acceleration/deceleration type. First-order lag",6,1],["M21","M21",6,"Cutting-feed acceleration/deceleration type, Second-order lag",6,1],["M21","M21",7,"Cutting-feed acceleration/deceleration type, Exponential acceleration/linear deceleration",6,1],["M22","M22",null,"FEED VEL. bit settings (7 bits)",6,1],["M22","M22",0,"Deceleration time constant for rapid-feed exponential acceleration/linear deceleration",6,1],["M22","M22",1,"Type of stroke-end stop",6,1],["M22","M22",2,"Type of stroke-end stop",6,1],["M23","M23",null,"FEED VEL. bit settings (2 bits)",6,1],["M23","M23",0,"Selection of NC control axes/PLC control axes",6,1],["M23","M23",1,"MP scale offset method",6,1],["M25","M25",null,"Illegal axis area upper limits",6,1],["M26","M26",null,"Illegal axis area lower limits",6,1],["M27","M27",null,"Optimum acceleration control: Target speed",6,1],["M29","M29",null,"Rapid feed clamping speed 1 for superposition control",6,1],["M30","M30",null,"Rapid feed clamping speed 2 for superposition control",6,1],["M31","M31",null,"Cutting feed clamping speed for superposition control",6,1],["M32","M32",null,"Safety speed for Safety supervisory mode 2",6,1],["M33","M33",null,"Safety speed for Safety supervisory mode 3",6,1],["M34","M34",null,"Safety clamping speed for Safety supervisory mode 2",6,1],["M35","M35",null,"Safety clamping speed for Safety supervisory mode 3",6,1],["M36","M36",null,"Speed supervisory door selection",6,1],["M37","M37",null,"Safety clamping speed reduction judgment coefficient",6,1],["M38","M38",null,"Interference check distances for INTELLIGENT SAFETY SHIELD, primary check distance",6,1],["M39","M39",null,"Interference check distances for INTELLIGENT SAFETY SHIELD, secondary check distance",6,1],["M40","M40",null,"Ram spindle stored stroke end, upper limit",6,1],["M41","M41",null,"Ram spindle stored stroke end, lower limit",6,1],["M42","M42",null,"Interference check distance for INTELLIGENT SAFETY SHIELD during automatic operation",6,1],["M45","M45",null,"Selection of a door for signal input on the drive side (servo) in safety supervisory mode",6,1],["M61","M61",null,"Fixed value",6,1],["M66","M66",null,"Variable acceleration control: Cutting feed rate",6,1],["M67","M67",null,"Rapid traverse rate limit in orbit machining",6,1],["M68","M68",null,"Cutting feedrate limit in orbit machining",6,1],["M70","M70",null,"Fixed value",6,1],["MS26","MS26",null,"Spindle speed fluctuation function Fluctuation cycle Initial value",7,1],["MS27","MS27",null,"Spindle speed fluctuation function Fluctuation amplitude Initial value",7,1],["MS125","MS125",null,"MACHINE STRUCTURE bit settings (1 bit)",7,1],["MS125","MS125",0,"Spindle speed fluctuation function Spindle speed fluctuation mode Initial value",7,1],["K1","K1",null,"Rotational radius of the C-axis",8,1],["K2","K2",null,"Minimum rotational angle",8,1],["K3","K3",null,"Identification number of the shaping control axis",8,1],["K7","K7",null,"Unbalanced axis",8,1],["K8","K8",null,"Waiting time for speed attainment ON during override variable thread cutting",8,1],["K10","K10",null,"Fixed value",8,1],["K11","K11",null,"Selection of language to be displayed",8,1],["K12","K12",null,"Fixed value (0)",8,1],["K13","K13",null,"Measurement skip feed rate (X-axis, Z-axis)",8,1],["K14","K14",null,"Measurement approach speed (X-axis, Z-axis)",8,1],["K15","K15",null,"Measurement skip speed (C-axis)",8,1],["K16","K16",null,"Measurement approach speed (C-axis)",8,1],["K17","K17",null,"Specification of measuring tolerance (lower limit) [valid only for L106 bit 6 = 1]",8,1],["K18","K18",null,"Specification of measuring tolerance (upper limit) [valid only for L106 bit 6 = 1]",8,1],["K19","K19",null,"Measurement stroke for workpiece measurement",8,1],["K20","K20",null,"Measurement stroke for tool nose measurement",8,1],["K21","K21",null,"Coefficient to determine rotation angle when retrying measurement C reference face",8,1],["K22","K22",null,"Measurement retry frequency when retrying reference face C measurement",8,1],["K23","K23",null,"Retry frequency for workpiece measurement",8,1],["K24-K28","K24-K28",null,"Parameter for system internal setting Setting prohibited",8,1],["K29","K29",null,"Simultaneous control: Delay counter for automatic correction of synchronizing errors",8,1],["K30","K30",null,"Approach speed for laser tool length measurement",8,1],["K30-K33","K30-K33",null,"K30 Approach speed for laser tool length measurement K31 Approach speed for laser tool diameter measurement K32 Pre-measuring speed for laser tool length measurement K33 Pre-measuring speed for laser tool diameter measurement",8,1],["K31","K31",null,"Approach speed for laser tool diameter measurement",8,1],["K32","K32",null,"Pre-measuring speed for laser tool length measurement",8,1],["K33","K33",null,"Pre-measuring speed for laser tool diameter measurement",8,1],["K34","K34",null,"Pre-measuring spindle speed for laser tool length measurement",8,1],["K35","K35",null,"Pre-measuring spindle speed for laser tool diameter measurement",8,1],["K36","K36",null,"Parameter for system internal setting Setting prohibited",8,1],["K37","K37",null,"External deceleration speed",8,1],["K38","K38",null,"Work number called during S-code macroprogram appointment",8,1],["K39","K39",null,"Work number called during T-code macroprogram appointment",8,1],["K40","K40",null,"Work number called during second auxiliary function macroprogram appointment",8,1],["K41","K41",null,"G31 skipping speed",8,1],["K42","K42",null,"G31.1 skipping speed",8,1],["K43","K43",null,"G31.2 skipping speed",8,1],["K44","K44",null,"G31.3 skipping speed",8,1],["K45","K45",null,"G31.4 skipping speed",8,1],["K46","K46",null,"Excessive pressing error spread (Amount of drooping)",8,1],["K47","K47",null,"M-code for external workpiece measurement",8,1],["K48","K48",null,"Spindle FB alarm detection method",8,1],["K49","K49",null,"First number of the standby M-codes",8,1],["K50","K50",null,"Total number of the standby M-codes",8,1],["K51","K51",null,"M-code during workpiece measurement retry operation",8,1],["K52","K52",null,"Parameter for system internal setting Setting prohibited",8,1],["K53","K53",null,"Vocal output language selection",8,1],["K54","K54",null,"Vocal output sound level",8,1],["K55","K55",null,"Vocal output warning reference value",8,1],["K56","K56",null,"Name of second auxiliary function",8,1],["K57","K57",null,"Type of S-code macroprogram appointment call",8,1],["K58","K58",null,"Type of T-code macroprogram appointment call",8,1],["K59","K59",null,"Type of second auxiliary function macroprogram appointment call",8,1],["K60","K60",null,"Fixed value (4)",8,1],["K61","K61",null,"Fixed value (1)",8,1],["K62","K62",null,"Fixed value (1)",8,1],["K63","K63",null,"Fixed value (1)",8,1],["K64","K64",null,"K64",8,1],["K65","K65",null,"Fixed value (1)",8,1],["K66","K66",null,"Fixed value (1)",8,1],["K67","K67",null,"Fixed value (1)",8,1],["K68","K68",null,"MEASURE bit settings (6 bits)",8,1],["K68","K68",0,"Coordinate system with reference to which the offset amounts are to be used in tool length offset for the selected machining surface (For machines of five-surface machining by angular tools)",8,1],["K68","K68",1,"Speed clamping method for polar coordinate interpolation",8,1],["K68","K68",3,"Fixed value (0)",8,1],["K68","K68",4,"Fixed value (0)",8,1],["K68","K68",5,"Override/dryrun speed valid/invalid when the G31 command is issued",8,1],["K68","K68",7,"Whether all the barrier cancel data in the program is to be cleared by executing the MMS unit in a MAZATROL program",8,1],["K69","K69",null,"MEASURE bit settings (8 bits)",8,1],["K69","K69",0,"G31.1 skip condition SKIP-2",8,1],["K69","K69",1,"G31.1 skip condition SKIP-10",8,1],["K69","K69",2,"G31.1 skip condition SKIP-3",8,1],["K69","K69",3,"G31.1 skip condition SKIP-11",8,1],["K69","K69",4,"G31.1 skip condition SKIP-5",8,1],["K69","K69",5,"G31.1 skip condition SKIP-13",8,1],["K69","K69",6,"G31.1 skip condition SKIP-6",8,1],["K69","K69",7,"G31.1 skip condition SKIP-14",8,1],["K70","K70",null,"MEASURE bit settings (8 bits)",8,1],["K70","K70",0,"G31.2 skip condition SKIP-2",8,1],["K70","K70",1,"G31.2 skip condition SKIP-10",8,1],["K70","K70",2,"G31.2 skip condition SKIP-3",8,1],["K70","K70",3,"G31.2 skip condition SKIP-11",8,1],["K70","K70",4,"G31.2 skip condition SKIP-5",8,1],["K70","K70",5,"G31.2 skip condition SKIP-13",8,1],["K70","K70",6,"G31.2 skip condition SKIP-6",8,1],["K70","K70",7,"G31.2 skip condition SKIP-14",8,1],["K71","K71",null,"MEASURE bit settings (8 bits)",8,1],["K71","K71",0,"G31.3 skip condition SKIP-2",8,1],["K71","K71",1,"G31.3 skip condition SKIP-10",8,1],["K71","K71",2,"G31.3 skip condition SKIP-3",8,1],["K71","K71",3,"G31.3 skip condition SKIP-11",8,1],["K71","K71",4,"G31.3 skip condition SKIP-5",8,1],["K71","K71",5,"G31.3 skip condition SKIP-13",8,1],["K71","K71",6,"G31.3 skip condition SKIP-6",8,1],["K71","K71",7,"G31.3 skip condition SKIP-14",8,1],["K72","K72",null,"G31.4 skip conditions",8,1],["K73","K73",null,"G4 skip conditions",8,1],["K74","K74",null,"Emergency stop contactor cutoff time (Safety supervisory function)",8,1],["K75","K75",null,"Contactor control output device 1 (Safety supervisory function)",8,1],["K76","K76",null,"Contactor control output device 2 (Safety supervisory function)",8,1],["K77","K77",null,"Door switch input device (Safety supervisory function)",8,1],["K78","K78",null,"Number of door switches (Safety supervisory function)",8,1],["K79","K79",null,"Supervisory speed filtering time during servo-off (Safety supervisory function)",8,1],["K80","K80",null,"Warning reference value (Vocal output)",8,1],["K81","K81",null,"Timer for machining management",8,1],["K82","K82",null,"Fixed value",8,1],["K83","K83",null,"Maximum amount of compensation for workpiece thermal expansion",8,1],["K84","K84",null,"Maximum allowable amount of compensation for workpiece thermal expansion in each interpolating cycle",8,1],["K85","K85",null,"Special linear acceleration/deceleration time constant for threading",8,1],["K87-K89","K87-K89",null,"Parameter for system internal setting Setting prohibited",8,1],["K90","K90",null,"Return override during synchronous tapping",8,1],["K91","K91",null,"Alternative M-code for M96",8,1],["K92","K92",null,"Alternative M-code for M97",8,1],["K93","K93",null,"Fixed value (2)",8,1],["K94","K94",null,"MEASURE bit settings (6 bits)",8,1],["K94","K94",0,"Selection of whether menu function is to be made invalid after operation has been stopped by [ATC STOP]",8,1],["K94","K94",1,"Indexing in measurement unit",8,1],["K94","K94",2,"Program editing on the EIA MONITOR display during multi-system operation",8,1],["K94","K94",3,"W-axis command code selection for the MDI mode",8,1],["K94","K94",4,"Indexing in cases where the next machining is started without specifying an index unit after a measurement unit has been executed",8,1],["K94","K94",5,"Display/no display of a block start interlock alarm if tool life of a tool specified in the block has expired",8,1],["K95","K95",null,"MEASURE bit settings (8 bits)",8,1],["K95","K95",0,"Selection whether the difference in angle between the upper and lower turrets is to be incorporated into the current C-axis position display of HD2",8,1],["K95","K95",1,"Fixed value (0)",8,1],["K95","K95",2,"Tool position compensation during T-command execution, performed/not performed",8,1],["K95","K95",3,"Coordinate system update during handle pulse interrupt, performed/not performed",8,1],["K95","K95",4,"Fixed value (0)",8,1],["K95","K95",5,"Acceleration/deceleration time constant for handle pulse feed",8,1],["K95","K95",6,"Software limits for G30 execution valid/invalid",8,1],["K95","K95",7,"In-position check valid/invalid",8,1],["K96","K96",null,"MEASURE bit settings (8 bits)",8,1],["K96","K96",0,"G0 command in-position check valid/invalid",8,1],["K96","K96",1,"Timing of manual free feed finish signal",8,1],["K96","K96",2,"Fixed value (0)",8,1],["K96","K96",3,"Axis/Cutting interlock alarm display, valid/invalid",8,1],["K96","K96",4,"Suppression of lost motion in modes other than the G1 command mode, valid/invalid",8,1],["K96","K96",5,"Fixed value (0)",8,1],["K96","K96",6,"Fixed value (0)",8,1],["K96","K96",7,"Fixed G0 inclination",8,1],["K97","K97",null,"B-axis misalignment correction, name of parallel axis",8,1],["K98","K98",null,"B-axis misalignment correction, name of orthogonal axis",8,1],["K99","K99",null,"Dynamic offset, name of rotational axis",8,1],["K100","K100",null,"Dynamic offset, name of parallel axis",8,1],["K101","K101",null,"Dynamic offset, name of orthogonal axis",8,1],["K102","K102",null,"MEASURE bit settings (7 bits)",8,1],["K102","K102",0,"Fixed value (0)",8,1],["K102","K102",2,"Fixed value (0)",8,1],["K102","K102",3,"Compensation method for the sensing tool’s eccentricity and stylus radius in workpiece measurement and coordinate measurement, M Pro compatible/New scheme",8,1],["K102","K102",4,"Z-axis direction for setting the TPC relay points of a measurement unit",8,1],["K102","K102",5,"Selection of setup data (jaw data and tailstock position) to be used in EIA/ISO programs",8,1],["K102","K102",6,"Setting the direction of rotation for milling tools mounted on the turret",8,1],["K102","K102",7,"Fixed value (0)",8,1],["K103","K103",null,"MEASURE bit settings (8 bits)",8,1],["K103","K103",0,"Handling of the sign assigned to hobbing address D",8,1],["K103","K103",1,"Synchronous control error auto-correction valid/invalid",8,1],["K103","K103",2,"Fixed value",8,1],["K103","K103",3,"DDB micron unit",8,1],["K103","K103",4,"Fixed value",8,1],["K103","K103",5,"Output of S-code and T-code at restart",8,1],["K103","K103",7,"Whether FIXED PT can be selected at RETURN of the end unit of the MAZATROL program",8,1],["K104","K104",null,"MEASURE bit settings (8 bits)",8,1],["K104","K104",0,"Output of a laser measurement B-axis 0-degree command after ATC, valid/invalid",8,1],["K104","K104",1,"Direction of the laser axis of the laser measuring instrument (L16/K104 bit 2)",8,1],["K104","K104",2,"Direction of the laser axis of the laser measuring instrument (Parallel to the Y-axis/X-axis)",8,1],["K104","K104",3,"Voice Adviser (Vocal output function) valid/invalid",8,1],["K104","K104",4,"Type of voice",8,1],["K104","K104",5,"Vocal guidance for warm-up operation",8,1],["K104","K104",6,"Rapid feed command when cutting feed override is set to 0%, operation is executed/alarm state",8,1],["K104","K104",7,"Feed rate for an approach to the starting point in EIA modal restarting mode",8,1],["K105","K105",null,"MEASURE bit settings (7 bits)",8,1],["K105","K105",1,"Fixed value (1)",8,1],["K105","K105",2,"S-code macro call invalid/valid",8,1],["K105","K105",3,"T-code macro call invalid/valid",8,1],["K105","K105",4,"Second auxiliary function macro call invalid/valid",8,1],["K105","K105",6,"Handling of the shaping control axis",8,1],["K105","K105",7,"Fixed value (0)",8,1],["K106","K106",null,"MEASURE bit settings (8 bits)",8,1],["K106","K106",0,"Execution conditions for user macroprogram interrupt",8,1],["K106","K106",1,"Start timing for user macroprogram interrupt",8,1],["K106","K106",2,"Fixed value (0)",8,1],["K106","K106",3,"Fixed value",8,1],["K106","K106",4,"Fixed value (0)",8,1],["K106","K106",5,"Fixed value (0)",8,1],["K106","K106",6,"Fixed value (0)",8,1],["K106","K106",7,"Fixed value (0)",8,1],["K107","K107",null,"MEASURE bit settings (5 bits)",8,1],["K107","K107",0,"Fixed value (0)",8,1],["K107","K107",4,"Corner judgment halfway through a block during polar coordinate interpolation where rotary axis shape correction is valid",8,1],["K107","K107",5,"Motion distance in the manual pulse feed mode for the axis whose position is displayed in diameter value",8,1],["K107","K107",6,"Deceleration for arc valid/invalid",8,1],["K107","K107",7,"Fixed value (0)",8,1],["K108","K108",null,"Permissible error range for synchronous control",8,1],["K110","K110",null,"Judgment angle near a singular point",8,1],["K111","K111",null,"Clamping speed in safety supervisory mode 3",8,1],["K113","K113",null,"Machine type",8,1],["K114","K114",null,"Axis number of the horizontal axis in the rectangular coordinate system",8,1],["K115","K115",null,"Axis number of the vertical axis in the rectangular coordinate system",8,1],["K116","K116",null,"Axis number of the height axis in the rectangular coordinate system",8,1],["K117","K117",null,"Rotational direction of the rotary axis",8,1],["K121","K121",null,"Axis number of the first rotary axis",8,1],["K122","K122",null,"Horizontal axis rotational center offset of the first rotary axis",8,1],["K123","K123",null,"Vertical axis rotational center offset of the first rotary axis",8,1],["K124","K124",null,"Height axis rotational center offset of the first rotary axis",8,1],["K125","K125",null,"Axis number of the second rotary axis",8,1],["K126","K126",null,"Horizontal axis rotational center offset of the second rotary axis",8,1],["K127","K127",null,"Vertical axis rotational center offset of the second rotary axis",8,1],["K128","K128",null,"Height axis rotational center offset of the second rotary axis",8,1],["K129","K129",null,"Position deviation 1 of the first rotary axis",8,1],["K130","K130",null,"Position deviation 2 of the first rotary axis",8,1],["K131","K131",null,"Position deviation 1 of the second rotary axis",8,1],["K132","K132",null,"Position deviation 2 of the second rotary axis",8,1],["K133","K133",null,"X-axis position deviation at the spindle center position",8,1],["K134","K134",null,"Y-axis position deviation at the spindle center position",8,1],["K135","K135",null,"Angle deviation 1 of the first rotary axis centerline",8,1],["K136","K136",null,"Angle deviation 2 of the first rotary axis centerline",8,1],["K137","K137",null,"Angle deviation 1 of the second rotary axis centerline",8,1],["K138","K138",null,"Angle deviation 2 of the second rotary axis centerline",8,1],["K139","K139",null,"X-axis angle deviation of the spindle centerline",8,1],["K140","K140",null,"Y-axis angle deviation of the spindle centerline",8,1],["K219","K219",null,"Coordinate measurement - plane inclination C, Skipping stroke limit",8,1],["K220","K220",null,"Coordinate measurement - plane inclination C, Approach feedrate for temporary measurement",8,1],["K221","K221",null,"Coordinate measurement - plane inclination C, Maximum C-axis angle variation",8,1],["K222","K222",null,"Coordinate measurement - plane inclination C, Number of re-measurements",8,1],["K223","K223",null,"Coordinate measurement - plane inclination C, Permissible difference for skip coordinates X",8,1],["K224","K224",null,"Coordinate measurement - plane inclination C, C-axis angle shift during retry operation",8,1],["K225","K225",null,"Machine type (2nd set of axes)",8,1],["K226","K226",null,"Axis number of the horizontal axis in the rectangular coordinate system (2nd set of axes)",8,1],["K227","K227",null,"Axis number of the vertical axis in the rectangular coordinate system (2nd set of axes)",8,1],["K228","K228",null,"Axis number of the height axis in the rectangular coordinate system (2nd set of axes)",8,1],["K229","K229",null,"Rotational direction of the rotary axis (2nd set of axes)",8,1],["K230","K230",null,"Axis number of the first rotary axis (2nd set of axes)",8,1],["K231","K231",null,"Horizontal axis rotational center offset of the first rotary axis (2nd set of axes)",8,1],["K232","K232",null,"Vertical axis rotational center offset of the first rotary axis (2nd set of axes)",8,1],["K233","K233",null,"Height axis rotational center offset of the first rotary axis (2nd set of axes)",8,1],["K234","K234",null,"Axis number of the second rotary axis (2nd set of axes)",8,1],["K235","K235",null,"Horizontal axis rotational center offset of the second rotary axis (2nd set of axes)",8,1],["K236","K236",null,"Vertical axis rotational center offset of the second rotary axis (2nd set of axes)",8,1],["K237","K237",null,"Height axis rotational center offset of the second rotary axis (2nd set of axes)",8,1],["K238","K238",null,"Fixed value",8,1],["K239","K239",null,"Fixed value",8,1],["K242","K242",null,"Axis name of the spindle to be rotated in orbit machining",8,1],["K243","K243",null,"M code number of the forward rotation command for orbit machining",8,1],["K244","K244",null,"M code number of the reverse rotation command for orbit machining",8,1],["K245","K245",null,"M code number of the rotation stop command for orbit machining",8,1],["K246","K246",null,"Permissible error at involute interpolation end point",8,1],["K247","K247",null,"Involute interpolation permissible acceleration",8,1],["K248","K248",null,"Involute interpolation minimum feedrate",8,1],["K249","K249",null,"Involute interpolation override lower limit",8,1],["K250","K250",null,"Wait time before turning ON of zero-speed signal upon ending hobbing II (position controlled hobbing)",8,1],["K251","K251",null,"Threshold value for singular posture in the cutting point command mode (for other than rapid feed)",8,1],["K252","K252",null,"Fixed value",8,1],["K253","K253",null,"Angle that sets the mill spindle tool tip in the +X-axis direction in orbit machining",8,1],["K253","K253",0,"Angle that sets the mill spindle tool tip in the +X-axis direction in orbit machining",8,1],["K254","K254",null,"Threshold value for singular posture in the cutting point command mode (for rapid feed)",8,1],["K254","K254",0,"Angle that sets the mill spindle tool tip in the +X-axis direction in orbit machining",8,1],["K257","K257",null,"MEASURE bit settings (7 bits)",8,1],["K257","K257",0,"Fixed value (1)",8,1],["K257","K257",1,"Jaw shape data: registration count",8,1],["K257","K257",2,"Fixed value",8,1],["K257","K257",3,"Direction of mill spindle rotation in orbit machining",8,1],["K257","K257",4,"Speed clamp alarm display in orbit machining",8,1],["K257","K257",6,"Fixed value (0)",8,1],["K257","K257",7,"Fixed value (1)",8,1],["K258","K258",null,"MEASURE bit settings (5 bits)",8,1],["K258","K258",0,"Spindle speed override unit switching function",8,1],["K258","K258",1,"MDI input support function",8,1],["K258","K258",2,"HANDLE INTERUPT window Tx display",8,1],["K258","K258",3,"HANDLE INTERUPT window Ty display",8,1],["K258","K258",4,"HANDLE INTERUPT window Tz display",8,1],["K259","K259",null,"MEASURE bit settings (3 bits)",8,1],["K259","K259",0,"Hobbing: Axis configuration discrimination function",8,1],["K259","K259",1,"Hobbing II (position controlled hobbing), Quasi constant inclination control",8,1],["K259","K259",2,"Fixed value",8,1],["K280","K280",null,"MEASURE bit settings (5 bits)",8,1],["K280","K280",0,"Fixed value",8,1],["K280","K280",1,"Fixed value",8,1],["K280","K280",2,"Fixed value",8,1],["K280","K280",6,"Fixed value",8,1],["K280","K280",7,"Fixed value",8,1],["K281","K281",null,"MEASURE bit settings (2 bits)",8,1],["K281","K281",0,"Laser tool length/diameter measurement on an arbitrary axis",8,1],["K281","K281",1,"TOOL EYE measurement, tool breakage detection reference selection",8,1],["SA1-SA8","SA1-SA8",null,"Maximum spindle speed in each speed range (range 1 to 8)",9,1],["SA9-SA16","SA9-SA16",null,"Constants for calculating each gear speed of the spindle (range 1 to 8)",9,1],["SA17-SA24","SA17-SA24",null,"Maximum spindle speed during tapping cycle (range 1 to 8)",9,1],["SA25-SA28","SA25-SA28",null,"Spindle speed during gear shifting (range 1 to 4)",9,1],["SA29","SA29",null,"Load meter reference output scaling factor (high-speed coil)",9,1],["SA30","SA30",null,"Load meter reference output base rotational speed (high-speed coil)",9,1],["SA31","SA31",null,"Load meter reference output scaling factor (low-speed coil)",9,1],["SA32","SA32",null,"Load meter reference output base rotational speed (low-speed coil)",9,1],["SA33-SA40","SA33-SA40",null,"Acceleration/deceleration time constant for the synchronous tapping (range 1 to 8)",9,1],["SA41","SA41",null,"Spindle orientating speed",9,1],["SA42","SA42",null,"Minimum spindle speed",9,1],["SA43","SA43",null,"Channel number for the spindle amplifier",9,1],["SA44","SA44",null,"Spindle amplifier rotary switch number",9,1],["SA45","SA45",null,"SPINDLE bit settings (7 bits)",9,1],["SA45","SA45",0,"Spindle speed range changing method, in relation to switching the torque factors for auto-pecking of the cutting load detection type",9,1],["SA45","SA45",1,"Spindle speed range changing method, in relation to switching the torque factors for auto-pecking of the cutting load detection type 2",9,1],["SA45","SA45",2,"Homing direction for synchronous tapping",9,1],["SA45","SA45",3,"Homing direction for synchronous tapping",9,1],["SA45","SA45",4,"Defines the specified direction as the Z-phase detection direction",9,1],["SA45","SA45",5,"Spindle index gear correction",9,1],["SA45","SA45",6,"Selection of spindle removal",9,1],["SA46","SA46",null,"SPINDLE bit settings (8 bits)",9,1],["SA46","SA46",0,"Direction of orientation",9,1],["SA46","SA46",1,"Direction of orientation",9,1],["SA46","SA46",2,"C-axis position control changeover type",9,1],["SA46","SA46",3,"Synchronous tapping position control changeover type",9,1],["SA46","SA46",4,"Z-phase detection direction",9,1],["SA46","SA46",5,"C-axis homing direction",9,1],["SA46","SA46",6,"C-axis homing direction",9,1],["SA46","SA46",7,"Synchronous tapping command polarity",9,1],["SA47","SA47",null,"SPINDLE bit settings (7 bits)",9,1],["SA47","SA47",7,"Considering/Ignoring the spindle/motor gear ratio",9,1],["SA48","SA48",null,"Encoder signal input destination",9,1],["SA49","SA49",null,"Speed attainment detection width",9,1],["SA50","SA50",null,"Spindle type",9,1],["SA51","SA51",null,"Number of gears on spindle",9,1],["SA52","SA52",null,"Turning spindle type",9,1],["SA53","SA53",null,"Spindle 1/4h (1/2h) rated torque for auto-pecking of the cutting load detection type — L coils",9,1],["SA54","SA54",null,"Spindle 1/4h (1/2h) rated torque for auto-pecking of the cutting load detection type — H coils",9,1],["SA55","SA55",null,"Spindle 1/4h (1/2h) rated torque for auto-pecking of the cutting load detection type — Spindle gear position 3",9,1],["SA56","SA56",null,"Spindle 1/4h (1/2h) rated torque for auto-pecking of the cutting load detection type — Spindle gear position 4",9,1],["SA57","SA57",null,"Spindle viscous friction coefficient “cms” for auto-pecking of the cutting load detection type — Range 1",9,1],["SA58","SA58",null,"Spindle viscous friction coefficient “cms” for auto-pecking of the cutting load detection type — Range 2",9,1],["SA59","SA59",null,"Spindle viscous friction coefficient “cms” for auto-pecking of the cutting load detection type — Range 3",9,1],["SA60","SA60",null,"Spindle viscous friction coefficient “cms” for auto-pecking of the cutting load detection type — Range 4",9,1],["SA61","SA61",null,"Spindle coulombic friction coefficient “fms” for auto-pecking of the cutting load detection type — Range 1",9,1],["SA62","SA62",null,"Spindle coulombic friction coefficient “fms” for auto-pecking of the cutting load detection type — Range 2",9,1],["SA63","SA63",null,"Spindle coulombic friction coefficient “fms” for auto-pecking of the cutting load detection type — Range 3",9,1],["SA64","SA64",null,"Spindle coulombic friction coefficient “fms” for auto-pecking of the cutting load detection type — Range 4",9,1],["SA65","SA65",null,"Cutting force calculation filter for auto-pecking of the cutting load detection type",9,1],["SA66","SA66",null,"Maximum permissible speed of the rotational axis for polygonal/hobbing machining",9,1],["SA67-SA73","SA67-SA73",null,"Rotational speed in the following spindle output diagrams: MACHINING NAVIGATION-RESULT/MACHINING NAVIGATION-PPEDICTION/Monitoring Functions/POSITION",9,1],["SA74-SA80","SA74-SA80",null,"Output in the following spindle output diagrams MACHINING NAVIGATION-RESULT/MACHINING NAVIGATION-PPEDICTION/Monitoring Functions/POSITION",9,1],["SA81","SA81",null,"Spindle limit speed selection for spindle position control time constants — Limit speed 1",9,1],["SA81-SA83","SA81-SA83",null,"Spindle limit speed selection for spindle position control time constants SA81: Limit speed 1 SA82: Limit speed 2 SA83: Limit speed 3",9,1],["SA82","SA82",null,"Spindle limit speed selection for spindle position control time constants — Limit speed 2",9,1],["SA83","SA83",null,"Spindle limit speed selection for spindle position control time constants — Limit speed 3",9,1],["SA84-SA86","SA84-SA86",null,"Spindle limit speed selection for spindle position control time constants SA81: Limit speed 1 SA82: Limit speed 2 SA83: Limit speed 3",9,1],["SA85","SA85",null,"Spindle position control time constants — Time constant 2",9,1],["SA86","SA86",null,"Spindle position control time constants — Time constant 3",9,1],["SA87","SA87",null,"Spindle speed operating time constant changeover revolutions 1",9,1],["SA88","SA88",null,"Spindle speed operating time constant changeover revolutions 2",9,1],["SA89","SA89",null,"Spindle speed operating time constant 1",9,1],["SA89-SA91","SA89-SA91",null,"Spindle speed operating time constant changeover revolutions SA87: Revolutions 1 SA88: Revolutions 2",9,1],["SA90","SA90",null,"Spindle speed operating time constant 2",9,1],["SA91","SA91",null,"Spindle speed operating time constant 3",9,1],["SA92","SA92",null,"Z-phase detection speed",9,1],["SA93","SA93",null,"Amount of synchronous tapping zero point shifting",9,1],["SA94","SA94",null,"Homing speed for synchronous tapping",9,1],["SA95","SA95",null,"Maximum revolutions in manual operation mode",9,1],["SA96","SA96",null,"Amount of orientation position shifting",9,1],["SA97","SA97",null,"Reduction ratio of the synchronous tapping time constant for high-speed synchronous tapping",9,1],["SA98","SA98",null,"Time constant for override variable thread cutting",9,1],["SA99","SA99",null,"Orientation time constant",9,1],["SA100","SA100",null,"- Rotational speed in the following spindle output diagrams at continuous rating: MACHINING",9,1],["SA100-SA106","SA100-SA106",null,"Rotational speed in the following spindle output diagrams at continuous rating:  MACHINING NAVIGATION-RESULT  MACHINING NAVIGATION-PPEDICTION  Monitoring Functions  POSITION",9,1],["SA106","SA106",null,"NAVIGATION-RESULT/MACHINING NAVIGATION-PPEDICTION/Monitoring Functions/POSITION",9,1],["SA107","SA107",null,"- Output in the following spindle output diagrams at continuous rating: MACHINING",9,1],["SA107-SA113","SA107-SA113",null,"Rotational speed in the following spindle output diagrams at continuous rating:  MACHINING NAVIGATION-RESULT  MACHINING NAVIGATION-PPEDICTION  Monitoring Functions  POSITION",9,1],["SA113","SA113",null,"NAVIGATION-RESULT/MACHINING NAVIGATION-PPEDICTION/Monitoring Functions/POSITION",9,1],["SA114","SA114",null,"Spindle speed supervisory mode 2 for safety supervision",9,1],["SA115","SA115",null,"Spindle speed supervisory mode 3 for safety supervision",9,1],["SA116","SA116",null,"Spindle safety clamping mode 2 for safety supervision",9,1],["SA117","SA117",null,"Spindle safety clamping mode 3 for safety supervision",9,1],["SA118","SA118",null,"Selecting the spindle door of the spindle whose speed is to be monitored",9,1],["SA119","SA119",null,"Deceleration judgment coefficient on safety speed clamping of the spindle to be supervised for safety",9,1],["SA120","SA120",null,"PLG pulse rate for spindle index gear tooth correction",9,1],["SA121","SA121",null,"Amount of branching [1] point correction for spindle index gear tooth",9,1],["SA121-SA128","SA121-SA128",null,"Amount of branching point correction for spindle index gear tooth SA121: Branching point [1] SA122: Branching point [2] SA123: Branching point [3] SA124: Branching point [4] SA125: Branching point [5] SA126: Branching point [6] SA127: Branching point [7] SA128: Branching point [8]",9,1],["SA122","SA122",null,"Amount of branching [2] point correction for spindle index gear tooth",9,1],["SA124","SA124",null,"Amount of branching [4] point correction for spindle index gear tooth",9,1],["SA125","SA125",null,"Amount of branching [5] point correction for spindle index gear tooth",9,1],["SA126","SA126",null,"Amount of branching [6] point correction for spindle index gear tooth",9,1],["SA127","SA127",null,"Amount of branching [7] point correction for spindle index gear tooth",9,1],["SA128","SA128",null,"Amount of branching [8] point correction for spindle index gear tooth",9,1],["SA129","SA129",null,"#1 notch filter frequency for cutting-load detection pecking cycle",9,1],["SA130","SA130",null,"#1 notch filter depth for cutting-load detection pecking cycle",9,1],["SA131","SA131",null,"#2 notch filter frequency for cutting-load detection pecking cycle",9,1],["SA132","SA132",null,"#2 notch filter depth for cutting-load detection pecking cycle",9,1],["SA133","SA133",null,"Breakage detection torque for cutting-load detection pecking cycle",9,1],["SA134","SA134",null,"Maximum spindle orientation speed",9,1],["SA135","SA135",null,"Rotational speed change width while override variable thread cutting is valid",9,1],["SA136","SA136",null,"Selection of signal input door on the safety monitor drive side (spindle)",9,1],["SA138","SA138",null,"Number of spindle gears",9,1],["SA139","SA139",null,"Number of motor gears",9,1],["SA140","SA140",null,"Turret indexing gear ratio at the motor side (only for MULTIPLEX)",9,1],["SA142","SA142",null,"SPINDLE bit settings (1 bit)",9,1],["SA142","SA142",0,"Initial C-axis position control changeover with deceleration to stop setting",9,1],["SA143","SA143",null,"SPINDLE bit settings (7 bits)",9,1],["SA143","SA143",0,"Relationship between spindle rotation commands (M code) and direction of spindle rotation",9,1],["SA143","SA143",1,"Waiting for phase compensation completion at the start of high-speed synchronous tapping",9,1],["SA143","SA143",2,"Simultaneous output of a gear shift M code and a turning spindle speed command",9,1],["SA143","SA143",3,"Spindle speed for the orient command given during spindle rotation",9,1],["SA143","SA143",4,"Fixed value",9,1],["SA143","SA143",5,"Fixed value",9,1],["SA143","SA143",6,"Fixed value",9,1],["SA144","SA144",null,"SPINDLE bit settings (7 bits)",9,1],["SA144","SA144",0,"Spindle winding coil selection function while override variable thread cutting is valid",9,1],["SA144","SA144",1,"Spindle winding coil selection while override variable thread cutting is valid",9,1],["SA144","SA144",3,"Warning check for alarm 67 HI-SPEED SYNCTAP AXIS ALARM (for spindle C-axis)",9,1],["SA144","SA144",4,"Positive threading spindle rotational direction and encoder polarity",9,1],["SA144","SA144",5,"Gear conversion during spindle rotation valid",9,1],["SA144","SA144",6,"Spindle gear changeover valid",9,1],["SA144","SA144",7,"Turret indexing valid",9,1],["SA224","SA224",null,"Hobbing II (position controlled hobbing), Spindle speed limit for time constant selection 1 for quasi constant inclination control",9,1],["SA225","SA225",null,"Hobbing II (position controlled hobbing), Spindle speed limit for time constant selection 2 for quasi constant inclination control",9,1],["SA226","SA226",null,"Hobbing II (position controlled hobbing), Spindle speed limit for time constant selection 3 for quasi constant inclination control",9,1],["SA227","SA227",null,"Hobbing II (position controlled hobbing), Time constant 1 for quasi constant inclination control",9,1],["SA228","SA228",null,"Hobbing II (position controlled hobbing), Time constant 2 for quasi constant inclination control",9,1],["SA229","SA229",null,"Hobbing II (position controlled hobbing), Time constant 3 for quasi constant inclination control",9,1],["SA231","SA231",null,"Spindle speed fluctuation function M code number for enabling the spindle speed fluctuation synchronous mode",9,1],["SA232","SA232",null,"Spindle speed fluctuation function M code number for disabling the spindle speed fluctuation synchronous mode",9,1],["SA233","SA233",null,"Spindle speed fluctuation function M code number for enabling spindle speed fluctuation",9,1],["SA234","SA234",null,"Spindle speed fluctuation function M code number for disabling spindle speed fluctuation",9,1],["SA242","SA242",null,"Fixed value",9,1],["SA243","SA243",null,"SPINDLE bit settings (2 bits)",9,1],["SA243","SA243",0,"INTELLIGENT BALANCE ANALYZER function (IBA): Measured data rotation direction",9,1],["SA243","SA243",1,"Smart safety monitoring alarm (for spindle)",9,1],["L1","L1",null,"Stylus eccentricity of touch sensor (X-component)",10,1],["L2","L2",null,"Stylus eccentricity of touch sensor (Y-component)",10,1],["L3","L3",null,"Radius of stylus ball of touch sensor (X-component)",10,1],["L4","L4",null,"Radius of stylus ball of touch sensor (Y-component)",10,1],["L5","L5",null,"Z-axis stroke for tip position memory (TEACH function)",10,1],["L6","L6",null,"Tool-breakage judgment distance for TBR function",10,1],["L7","L7",null,"Tool-breakage restoration mode for TBR function (for M35 external tool breakage detection or tool measurement unit)",10,1],["L8","L8",null,"Skipping stroke limit for MMS",10,1],["L9","L9",null,"Selection of random ATC specifications",10,1],["L10","L10",null,"Interval between magazine pockets",10,1],["L11","L11",null,"Touch sensor’s interference direction",10,1],["L12","L12",null,"Tolerance for manual measurement",10,1],["L13","L13",null,"Allowable angle for parallelism and right angle in manual measurement",10,1],["L14","L14",null,"Escapement for straightness measurement",10,1],["L15","L15",null,"Macro program number for straightness measurement",10,1],["L16","L16",null,"Parameter for system internal setting Setting prohibited",10,1],["L17","L17",null,"Minimum angle of head indexing command (only for INTEGREX j)",10,1],["L18","L18",null,"Presence/absence of tailstock",10,1],["L19","L19",null,"Number of electric steady rests",10,1],["L21","L21",null,"Output type of index (rotary) table",10,1],["L22","L22",null,"Data of the tool nose measurement sensor, Sensor width along the X-axis",10,1],["L22-L25","L22-L25",null,"Data of the tool nose measurement sensor L22 : Sensor width along the X-axis L23 : Sensor width along the Z-axis L24 : X-coordinate of the sensor’s reference point L25 : Z-coordinate of the sensor’s reference point",10,1],["L23","L23",null,"Data of the tool nose measurement sensor, Sensor width along the Z-axis",10,1],["L24","L24",null,"Tool nose measurement sensor reference position, X-axis",10,1],["L25","L25",null,"Tool nose measurement sensor reference position, Z-axis",10,1],["L26","L26",null,"Tool nose measurement sensor reference position, Y-axis",10,1],["L27","L27",null,"Timer setting for manual TOOL EYE measurement",10,1],["L28","L28",null,"Amount of Z-axial retreat from the approach point for TOOL EYE measurement",10,1],["L29","L29",null,"Machine efficiency",10,1],["L30","L30",null,"Selection of machining navigation case introduction messages",10,1],["L31-L34","L31-L34",null,"Use in machine manufacturer macro",10,1],["L37","L37",null,"Minimum index angle of index table",10,1],["L38","L38",null,"M/B-code for index of index table",10,1],["L39","L39",null,"Selection of execution/non execution of indexing unit",10,1],["L40","L40",null,"Availability of specification of index table angle in end unit",10,1],["L41","L41",null,"Simultaneous operation of indexing unit with ATC",10,1],["L42","L42",null,"Initial value of index table angle",10,1],["L43","L43",null,"Indication of index table angle",10,1],["L44","L44",null,"Selection of automatic setting on/off for nose position correction of a drilling tool",10,1],["L45","L45",null,"Index table angle command",10,1],["L46","L46",null,"Maximum number of pallets in pallet changing unit",10,1],["L47","L47",null,"To prepare or not to prepare next pallet change",10,1],["L48","L48",null,"Number of long boring bars",10,1],["L49","L49",null,"Simultaneous operation of pallet change with ATC",10,1],["L50","L50",null,"Rewriting of head number",10,1],["L51","L51",null,"Tool command system in MDI operation",10,1],["L52","L52",null,"Writing of machining management data with macro variable",10,1],["L53","L53",null,"Showing of program number in PALLET MANAGEMENT display",10,1],["L54","L54",null,"Selection of automatic operation mode",10,1],["L55","L55",null,"Spindle load meter display type",10,1],["L56","L56",null,"Method of measurement of coordinates by tool edge memorizing function (TEACH)",10,1],["L57","L57",null,"Rewriting of tool data during automatic operation",10,1],["L58","L58",null,"Head index angle indication system",10,1],["L59","L59",null,"Input selection for HEAD OFFSET display",10,1],["L60","L60",null,"Head quantity",10,1],["L61","L61",null,"Output timing of AHC and APC",10,1],["L62","L62",null,"Head relay point X1",10,1],["L63","L63",null,"Head relay point Y1",10,1],["L64","L64",null,"Head relay point X2",10,1],["L65","L65",null,"Head relay point Y2",10,1],["L66","L66",null,"Return/No return to head indexing point Z",10,1],["L67","L67",null,"Length between the end surface of the spindle and the center of head rotation",10,1],["L68","L68",null,"Head correction value X",10,1],["L69","L69",null,"Head correction value Y",10,1],["L70","L70",null,"Axis movement from machining face on escapement",10,1],["L71","L71",null,"Shift of basic coordinate for oblique face machining",10,1],["L72","L72",null,"5-axis spline interpolation geometry compensation software acceleration/deceleration filter 2 time constant",10,1],["L73","L73",null,"Time constant for shape correction acceleration/deceleration filter 2",10,1],["L74","L74",null,"Cutting feed rate for pre-interpolational acceleration/deceleration control",10,1],["L75","L75",null,"Time constant for pre-interpolational linear control during cutting feed rate acceleration/deceleration",10,1],["L76","L76",null,"Acceleration rate for high-speed cutting",10,1],["L77","L77",null,"Angle for deceleration at corner before interpolation",10,1],["L78","L78",null,"Amount of X-axial retreat from the approach point for TOOL EYE measurement",10,1],["L79","L79",null,"In-position width for changeover of the synchronized-tapping gain",10,1],["L80","L80",null,"Linear to arc deceleration rate",10,1],["L81","L81",null,"Parameter for system internal setting Setting prohibited",10,1],["L82","L82",null,"Table thickness",10,1],["L83","L83",null,"Spindle head radius",10,1],["L84","L84",null,"Correction value of alignment deviation X (Upper face)",10,1],["L85","L85",null,"Correction value of alignment deviation Y (Upper face)",10,1],["L86","L86",null,"Correction value of alignment deviation X (0-degree face)",10,1],["L87","L87",null,"Correction value of alignment deviation Y (0-degree face)",10,1],["L88","L88",null,"Correction value of alignment deviation X (90-degree face) Stylus eccentricity of touch sensor (X-component for B-axis at 90-degree position) (for INTEGREX series)",10,1],["L89","L89",null,"Correction value of alignment deviation Y (90-degree face) Stylus eccentricity of touch sensor (Y-component for B-axis at 90-degree position) (for INTEGREX series)",10,1],["L90","L90",null,"Correction value of alignment deviation X (180-degree face) Stylus eccentricity of touch sensor (X-component for B-axis at 180-degree position) (for INTEGREX series)",10,1],["L91","L91",null,"Correction value of alignment deviation Y (180-degree face) Stylus eccentricity of touch sensor (Y-component for B-axis at 180-degree position) (for INTEGREX series)",10,1],["L92","L92",null,"Correction value of alignment deviation X (270-degree face)",10,1],["L93","L93",null,"Correction value of alignment deviation Y (270-degree face)",10,1],["L94","L94",null,"X/Y travel distance during EIA-programmed tool measurement",10,1],["L95","L95",null,"Offset number auto-setting for EIA-programmed tool measurement",10,1],["L96","L96",null,"Amount of shifting during offset number auto-setting for EIA-programmed tool measurement",10,1],["L97","L97",null,"M-code to be output when selecting menu function for the MDI tool designation",10,1],["L98","L98",null,"Max. tool length for laser tool length measurement",10,1],["L99","L99",null,"Cycle time for saving the operational status management data",10,1],["L100","L100",null,"Laser sensor position X",10,1],["L100-L105","L100-L105",null,"L100 Laser sensor position X L101 Laser sensor position Y L102 Laser sensor position Z L103 Approach point X for laser tool diameter measurement L104 Approach point Y for laser tool diameter measurement L105 Approach point Z for laser tool length measurement",10,1],["L101","L101",null,"Laser sensor position Y",10,1],["L102","L102",null,"Laser sensor position Z",10,1],["L103","L103",null,"Approach point X for laser tool diameter measurement",10,1],["L104","L104",null,"Approach point Y for laser tool diameter measurement",10,1],["L105","L105",null,"Approach point Z for laser tool diameter measurement",10,1],["L106","L106",null,"TABLE bit settings (8 bits)",10,1],["L106","L106",0,"Measuring equipment selection",10,1],["L106","L106",1,"Selection of a rotational reference coordinate system for WPC-th",10,1],["L106","L106",2,"Selection of measuring equipment",10,1],["L106","L106",3,"Selection of whether workpiece measurement results and tool measurement results are to be stored into tool data of the lower turret",10,1],["L106","L106",4,"Selection of whether to enable or disable the fixed amount compensation function",10,1],["L106","L106",5,"B-axis user-defined angle setting in the coordinate measurement unit and workpiece measurement unit invalid/valid",10,1],["L106","L106",6,"Non-compensation area for the tool measurement and execution timing of tool and workpiece measurement operation",10,1],["L106","L106",7,"Selection of laser measuring menu display",10,1],["L107","L107",null,"TABLE bit settings (8 bits)",10,1],["L107","L107",0,"Tool path drawing",10,1],["L107","L107",1,"Tailstock function valid/invalid",10,1],["L107","L107",2,"Tailstock type",10,1],["L107","L107",3,"Whether tail thrust is also to be displayed in pounds (lbs)",10,1],["L107","L107",4,"LBB No. setting for the grooving I.D. tool, threading I.D. tool, or touch sensor, valid/invalid",10,1],["L107","L107",5,"XYZ-axis operation for the first T-command after cycle start",10,1],["L107","L107",6,"A-axis operation for the first T-command after cycle start",10,1],["L107","L107",7,"Heavy tool designation valid/invalid",10,1],["L108","L108",null,"TABLE bit settings (8 bits)",10,1],["L108","L108",0,"Fixed value (0)",10,1],["L108","L108",1,"Fixed value (0)",10,1],["L108","L108",2,"Fixed value (0)",10,1],["L108","L108",3,"Fixed value (0)",10,1],["L108","L108",4,"Fixed value (0)",10,1],["L108","L108",5,"Incorporating the C-axis coordinate into the TOOL PATH CHECK, TRACE, and SHAPE CHECK displays of the VRX machine",10,1],["L108","L108",6,"Fixed value (0)",10,1],["L108","L108",7,"Displaying the milling tool nose in the MAZATROL program of the TOOL PATH CHECK display",10,1],["L109","L109",null,"TABLE bit settings (8 bits)",10,1],["L109","L109",0,"Axial direction of the two axes to be checked by the software limit relative position check function (1st set of axes)",10,1],["L109","L109",1,"Axial direction of the two axes to be checked by the software limit relative position check function (2nd set of axes)",10,1],["L109","L109",2,"Axial direction of the two axes to be checked by the software limit relative position check function (3rd set of axes)",10,1],["L109","L109",3,"Axial direction of the two axes to be checked by the software limit relative position check function (4th set of axes)",10,1],["L109","L109",4,"Formula selection for calculating horsepower and thrust on the TOOL DATA display with [AUTO SET]",10,1],["L109","L109",5,"Teaching when the lower turret is selected in the basic coordinate system unit (WPC)",10,1],["L109","L109",6,"Fixed value",10,1],["L109","L109",7,"Fixed value",10,1],["L110","L110",null,"TABLE bit settings (8 bits)",10,1],["L110","L110",0,"Opposed-spindle lathe specifications",10,1],["L110","L110",1,"Vertically inverted spindle specifications",10,1],["L110","L110",2,"Axis name of the secondary spindle",10,1],["L110","L110",3,"Whether to disable or enable the display of “section to be machined” in the milling tool sequence",10,1],["L110","L110",4,"RAM spindle specification",10,1],["L110","L110",5,"Correction axis for LENGTH B",10,1],["L110","L110",6,"Vertical lower turret specification",10,1],["L110","L110",7,"Z-axis direction",10,1],["L111","L111",null,"TABLE bit settings (3 bits)",10,1],["L111","L111",5,"T-code in the index unit to be executed before the pallet change unit",10,1],["L111","L111",6,"Fixed value (1)",10,1],["L111","L111",7,"Whether interference check is executed or not while tailstock pushing state is released",10,1],["L112","L112",null,"TABLE bit settings (8 bits)",10,1],["L112","L112",0,"Whether traction tailstock is present or absent",10,1],["L112","L112",1,"Whether carriage-connection steadyrest 1 is present or absent",10,1],["L112","L112",2,"Whether carriage-connection steadyrest 2 is present or absent",10,1],["L112","L112",3,"Whether carriage-connection steadyrest 3 is present or absent",10,1],["L112","L112",4,"Whether carriage-connection steadyrest 4 is present or absent",10,1],["L113","L113",null,"Software limit relative position check – Check reference axis (1st set of axes)",10,1],["L113-L116","L113-L116",null,"Software limit relative position check – Check reference axis L113 1st set of axes L114 2nd set of axes L115 3rd set of axes L116 4th set of axes",10,1],["L114","L114",null,"Software limit relative position check – Check reference axis (2nd set of axes)",10,1],["L115","L115",null,"Software limit relative position check – Check reference axis (3rd set of axes)",10,1],["L116","L116",null,"Software limit relative position check – Check reference axis (4th set of axes)",10,1],["L117","L117",null,"Software limit relative position check – Check target axis (1st set of axes)",10,1],["L117-L120","L117-L120",null,"Software limit relative position check – Check target axis L117 1st set of axes L118 2nd set of axes L119 3rd set of axes L120 4th set of axes",10,1],["L118","L118",null,"Software limit relative position check – Check target axis (2nd set of axes)",10,1],["L119","L119",null,"Software limit relative position check – Check target axis (3rd set of axes)",10,1],["L120","L120",null,"Software limit relative position check – Check target axis (4th set of axes)",10,1],["L121","L121",null,"Software limit relative position check – Limit distance in the approaching direction (1st set of axes)",10,1],["L121-L124","L121-L124",null,"Software limit relative position check – Limit distance in the approaching direction L121 1st set of axes L122 2nd set of axes L123 3rd set of axes L124 4th set of axes",10,1],["L122","L122",null,"Software limit relative position check – Limit distance in the approaching direction (2nd set of axes)",10,1],["L123","L123",null,"Software limit relative position check – Limit distance in the approaching direction (3rd set of axes)",10,1],["L124","L124",null,"Software limit relative position check – Limit distance in the approaching direction (4th set of axes)",10,1],["L125","L125",null,"Rotational axis prefiltering time constant",10,1],["L126","L126",null,"Positioning direction of the head rotation - -axis for oblique plane indexing",10,1],["L129","L129",null,"Acceleration/deceleration filter (1st stage), G1 time constant",10,1],["L130","L130",null,"Acceleration/deceleration filter (1st stage), G0 time constant",10,1],["L131","L131",null,"Acceleration/deceleration filter (2nd stage), G1 time constant",10,1],["L132","L132",null,"Acceleration/deceleration filter (2nd stage), G0 time constant",10,1],["L133","L133",null,"<For table tilt type (B-axis tilting table specifications)> B-axis rotation center displacement (X-axis direction)",10,1],["L134","L134",null,"Tool control rotary axis offset First rotary axis vertical offset <For table tilt type (A-axis tilting table specifications)> A-axis rotation center displacement (Y-axis direction)",10,1],["L135","L135",null,"<For tool tilt type> Tool control rotary axis offset First rotary axis height offset <For table tilt type> (A-(B-)axis rotation center displacement (Z-axis direction)",10,1],["L136","L136",null,"<For tool tilt type> Tool rotational axis offset, horizontal axis offset amount for the 2nd rotational axis",10,1],["L137","L137",null,"<For tool tilt type> Tool rotational axis offset, vertical axis offset amount for the 2nd rotational axis",10,1],["L138","L138",null,"<For tool tilt type> Tool rotational axis offset, height axis offset amount for the 2nd rotational axis",10,1],["L139","L139",null,"Minimum usable tool diameter of the measurable chamfering tool",10,1],["L140","L140",null,"Waiting time for the completion signal of M35 (tool breakage detection) from PLC",10,1],["L141","L141",null,"Software limit relative position check (for auxiliary equipment axis) – Task delay period",10,1],["L145","L145",null,"Smooth corner control function: Cutting feed rate for pre-interpolational acceleration/deceleration control",10,1],["L146","L146",null,"Smooth corner control function: Time constant for pre-interpolational linear control during cutting feed rate acceleration/deceleration",10,1],["L147","L147",null,"Smooth corner control function: Software acceleration/deceleration filter G1 time constant (1st stage)",10,1],["L148","L148",null,"Smooth corner control function: Software acceleration/deceleration filter G1 time constant (2ndt stage)",10,1],["L149","L149",null,"Smooth corner control function: Rapid feed rate before interpolation for rapid feed command (involving rotary axis) during tool tip point control",10,1],["L150","L150",null,"Smooth corner control function: Rapid feed time constant before interpolation for rapid feed command (involving rotary axis) during tool tip point control",10,1],["L151","L151",null,"Small-diameter table thickness",10,1],["L171","L171",null,"TABLE bit settings (1 bit)",10,1],["L171","L171",1,"Selection of [PALLET No.SET] menu item display",10,1],["L270","L270",null,"Feedrate for clamping the acceleration in orbit machining",10,1],["L271","L271",null,"Time constant for clamping the acceleration in orbit machining",10,1],["N1","N1",null,"Rapid-feed time constant (linear acceleration/deceleration)",11,1],["N2","N2",null,"Cutting-feed time constant (linear acceleration/deceleration)",11,1],["N3","N3",null,"Rapid-feed time constant (First-order lag)",11,1],["N4","N4",null,"Time constant for post-interpolation rapid feed acceleration/deceleration filter",11,1],["N5","N5",null,"Cutting-feed time constant (First-order lag)",11,1],["N7","N7",null,"OT time",11,1],["N8","N8",null,"Creeping speed during initial zero-point return",11,1],["N9","N9",null,"Amount of grid ignorance during initial zero-point return",11,1],["N10","N10",null,"Grid spacing",11,1],["N12","N12",null,"Machine dependent specific value",11,1],["N13","N13",null,"Machine dependent specific value",11,1],["N15","N15",null,"Machine dependent specific value",11,1],["N16","N16",null,"Machine dependent specific value",11,1],["N17","N17",null,"Servo amplifier channel number",11,1],["N18","N18",null,"Servo amplifier rotary switch number",11,1],["N19","N19",null,"Axis system number",11,1],["N21","N21",null,"TIME CONST. bit settings (8 bits)",11,1],["N21","N21",0,"Linear-type rotational axis",11,1],["N21","N21",1,"Rotational axis shortcut Invalid/Valid",11,1],["N21","N21",2,"Fixed value (0)",11,1],["N21","N21",3,"Fixed value",11,1],["N21","N21",4,"Reference axis for superposition control",11,1],["N21","N21",5,"Superposition axis for superposition control",11,1],["N21","N21",6,"Relative polarity of control axis",11,1],["N21","N21",7,"Current position immediately after cross machining",11,1],["N22","N22",null,"TIME CONST. bit settings (5 bits)",11,1],["N22","N22",0,"Axis selection for 3D interference check during automatic operation and for positioning on the VIRTUAL MACHINING display",11,1],["N22","N22",1,"Turret C-axis specification (for 3D interference check during automatic operation and for virtual machining)",11,1],["N22","N22",2,"Axis for which the axis name is specified with a comma",11,1],["N22","N22",3,"Fixed value",11,1],["N22","N22",4,"Fixed value",11,1],["N25","N25",null,"Time constant for deceleration rate calculation",11,1],["N26","N26",null,"Accuracy coefficient for deceleration rate calculation",11,1],["N27","N27",null,"Rapid feed time constant for superposition",11,1],["N28","N28",null,"Cutting feed time constant for superposition",11,1],["N29","N29",null,"Time constant for shape correction rapid feed acceleration/deceleration filter",11,1],["N30","N30",null,"Time constant for cutting feed (for M881)",11,1],["N30-N35","N30-N35",null,"Cutting feed time constant for time constant changeover M-code command N30: for M881 command N31: for M882 command N32: for M883 command N33: for M884 command N34: for M885 command N35: for M886 command",11,1],["N31","N31",null,"Time constant for cutting feed (for M882)",11,1],["N32","N32",null,"Time constant for cutting feed (for M883)",11,1],["N33","N33",null,"Time constant for cutting feed (for M884)",11,1],["N34","N34",null,"Time constant for cutting feed (for M885)",11,1],["N35","N35",null,"Time constant for cutting feed (for M886)",11,1],["N36","N36",null,"Multi-turn counter increment with absolute position rotary-type rotational axis in special gear ratio",11,1],["N37","N37",null,"Rotational speed after multi-turn counter increment with absolute position rotary-type rotational axis in special gear ratio",11,1],["N38","N38",null,"Fixed value",11,1],["N57","N57",null,"Real time tuning II Rapid feed time constant, maximum value",11,1],["N58","N58",null,"Real time tuning II Minimum inertia ratio",11,1],["N60","N60",null,"Real time tuning II Rapid feed time constant, minimum value",11,1],["N61","N61",null,"Real time tuning II Maximum inertia ratio",11,1],["N63","N63",null,"Real time tuning II Rapid feed time constant, range of change",11,1],["N66","N66",null,"Variable acceleration control: Cutting feed time constant",11,1],["N67","N67",null,"TIME CONST. bit settings (2 bits)",11,1],["N67","N67",0,"Axis with a 2-character axis name",11,1],["N67","N67",1,"Fixed value",11,1],["US1","US1",null,"DISPLAY STRUCTURE bit settings (7 bits)",12,2],["US1","US1",0,"Menu highlighting method",12,2],["US1","US1",1,"Selection of operation for automatic determination of cutting conditions when tool data is not input",12,2],["US1","US1",2,"MAZA-CHECK input support function log output, parameter reference",12,2],["US1","US1",3,"Status of [TOP CUT FIRST] when the power is turned on",12,2],["US1","US1",4,"Directory selection function in the WORK No. SELECT window",12,2],["US1","US1",5,"Project function in the WORK No. SELECT window/PROGRAM FILE display",12,2],["US1","US1",6,"Alarm window display selection while displaying Smooth application manager",12,2],["US37","US37",null,"Data guard function: Maximum number of users",12,2],["US39","US39",null,"Automatic determination of cutting conditions Element that automatically determines “FR” (DRILL)",12,2],["US40","US40",null,"Automatic determination of cutting conditions Element that automatically determines “FR” (BOR BAR, B-B BAR and BCK FACE)",12,2],["US41","US41",null,"Automatic determination of cutting conditions Element that automatically determines “FR” (FCE MILL, END MILL)",12,2],["US42","US42",null,"Automatic determination of cutting conditions Reference shank diameter (BAR, CPY, CORNER)",12,2],["US43","US43",null,"Automatic determination of cutting conditions Tool nose radius when tool data is not input (BAR, CPY, CORNER and FACING)",12,2],["US44","US44",null,"Automatic determination of cutting conditions Tool width when tool data is not input (BAR, CPY and CORNER)",12,2],["US45","US45",null,"Automatic determination of cutting conditions Tool nose angle when tool data is not input (BAR, CPY, CORNER and FACING)",12,2],["US46","US46",null,"Automatic determination of cutting conditions Tool nose width when tool data is not input (T.GROOVE)",12,2],["F1","F1",null,"G61.1 corner deceleration coefficient (%)",13,2],["F2","F2",null,"G61.1 arc-clamping speed coefficient (%)",13,2],["F3","F3",null,"For high-speed smoothing control",13,2],["F4","F4",null,"Distance to judge the shape formed by 3 axes under tool tip point control in the 5-axis fairing function",13,2],["F5","F5",null,"Distance to judge the shape formed by rotary 2 axes in the 5-axis fairing function",13,2],["F6","F6",null,"Minimum allowable height of stepped sections for deceleration in high-speed smoothing control mode",13,2],["F7","F7",null,"Fixed value (0)",13,2],["F8","F8",null,"Corner deceleration speed coefficient for high-speed smoothing control",13,2],["F9","F9",null,"Circular cutting clamp speed coefficient for high-speed smoothing control",13,2],["F10","F10",null,"Return amount during tap high-speed deep-hole cycle",13,2],["F11","F11",null,"Vector constant for 3-D, tool-diameter compensation",13,2],["F12","F12",null,"Return amount of pecking in drill high-speed deep-hole cycle or in G73",13,2],["F13","F13",null,"Allowance amount of rapid-feed stop in deep-hole drilling cycle or in G83/G283",13,2],["F14","F14",null,"Rotation center of coordinates (axis of abscissa)",13,2],["F15","F15",null,"Rotation center of coordinates (axis of ordinate)",13,2],["F16","F16",null,"Horizontal length of coordinate rotation",13,2],["F17","F17",null,"Vertical length of coordinate rotation",13,2],["F18","F18",null,"Angle of coordinate rotation",13,2],["F19","F19",null,"Maximum permissible difference in arc radius",13,2],["F20","F20",null,"Fixed value of scaling factor",13,2],["F21","F21",null,"Maximum inside-corner angle available with automatic corner override (G62)",13,2],["F22","F22",null,"Deceleration area of automatic corner overriding (G62)",13,2],["F27","F27",null,"Handling of G92 (spindle speed clamp value) command at restart",13,2],["F28","F28",null,"Threading chamfering angle",13,2],["F29","F29",null,"Override value of automatic corner overriding (G62)",13,2],["F30","F30",null,"G-code type selection",13,2],["F31","F31",null,"Select a roughing priority type for program layout",13,2],["F32","F32",null,"Operation when argument R is omitted from the maximum/minimum spindle speed setting",13,2],["F33","F33",null,"EIA/ISO bit settings (7 bits)",13,2],["F33","F33",0,"Incorporation of the MAZATROL tool length into the current position counter valid/invalid",13,2],["F33","F33",2,"Tool management function",13,2],["F33","F33",3,"Selection of check in the course of automatic operation when data is input/output through network",13,2],["F33","F33",4,"Selection of restart setting method in the MAZATROL program",13,2],["F33","F33",5,"Automatic tool identification of turning tools in TOOL EYE manual tool length measurement",13,2],["F33","F33",6,"Modal indication for G-code group No. 1 in the fixed cycle mode",13,2],["F33","F33",7,"Modal indication on “radius data input for X-axis” in the mode of 3D coordinate conversion (G68.5)",13,2],["F34","F34",null,"EIA/ISO bit settings (8 bits)",13,2],["F34","F34",0,"Cancellation of the ram spindle offset command (G52.1) when the RESET key is pressed valid/invalid",13,2],["F34","F34",1,"Representation on the POSITION display for G49 (only for the INTEGREX e Series)",13,2],["F34","F34",2,"Parts count override in the middle of automatic operation",13,2],["F34","F34",3,"Tool change command output position of the tool to use in manual program unit when WPC is selected for workpiece scheme",13,2],["F34","F34",4,"Programming type for inclined-surface machining",13,2],["F34","F34",5,"Current position display of the tool nose at reset",13,2],["F34","F34",6,"Compensating movement for a T-code with a movement command in one block",13,2],["F34","F34",7,"Application of Z-OFFSET and C-OFFSET values for the tape operation mode",13,2],["F35","F35",null,"EIA/ISO bit settings (7 bits)",13,2],["F35","F35",0,"Selection whether or not multiple material pieces can be arranged on the VIRTUAL MACHINING or 3D MONITOR display",13,2],["F35","F35",1,"Automatic setting of the material model for a MAZATROL program of initial-point scheme on the VIRTUAL MACHINING or 3D MONITOR display",13,2],["F35","F35",2,"When assigning G-code for a cutting function not to be represented with the INTELLIGENT SAFETY SHIELD being selected for automatic operation, operation is continued/alarm state",13,2],["F35","F35",3,"When a program prepared and stored for the Hard Disk operation is called up as a subprogram with the INTELLIGENT SAFETY SHIELD being selected for automatic operation, operation is continued/alarm state",13,2],["F35","F35",4,"Representation of cutting-off or parting operation on the VIRTUAL MACHINING and 3D MONITOR displays",13,2],["F35","F35",5,"Movement of traction tailstock or carriage-connection steadyrest during zero-point return operation of all axes on the VIRTUAL MACHINING display",13,2],["F35","F35",7,"Alarming/No alaming when the feed-overriding value has been changed in the flow of automatic operation with the INTELLIGENT SAFETY SHIELD being active",13,2],["F36","F36",null,"EIA/ISO bit settings (8 bits)",13,2],["F36","F36",0,"Current position display in the G52.5 coordinate system",13,2],["F36","F36",1,"Automatic M-code setting in EIA/ISO program modal restarting mode",13,2],["F36","F36",2,"Automatic S-code setting in EIA/ISO program modal restarting mode",13,2],["F36","F36",3,"Error check function in cases where numerical data is omitted in the EIA program or in MDI mode",13,2],["F36","F36",4,"Display of the chuck and tailstock areas for an EIA/ISO program on the TRACE or TOOL PATH CHECK display",13,2],["F36","F36",5,"Touch sensor offset in X/Y direction",13,2],["F36","F36",6,"Number of effective decimal digits in the tool axis vector components (I, J, K) for tool tip point control type 2 (G43.5) and cutting point command type 2 (G43.9)",13,2],["F36","F36",7,"Rotational axis prefiltering",13,2],["F37","F37",null,"EIA/ISO bit settings (7 bits)",13,2],["F37","F37",0,"Temporary cancellation of geometry compensation for G0 (rapid traverse) in the mode of tool tip point control",13,2],["F37","F37",1,"Subprogram call given in manual program unit (for turning machines only)",13,2],["F37","F37",2,"Tool length compensation in MDI operation",13,2],["F37","F37",3,"Timing of clearing #3006 (stop) message",13,2],["F37","F37",4,"Selection of the coordinate system for linear interpolation on specification of a rapid traverse command during tool tip point control",13,2],["F37","F37",5,"Operation when running programs in the hard disk or through Ethernet with the INTELLIGENT SAFETY SHIELD enabled for automatic operation",13,2],["F37","F37",6,"Operation when “ATC” is not specified in end unit",13,2],["F38","F38",null,"EIA/ISO bit settings (6 bits)",13,2],["F38","F38",0,"Options displayed in the tool model type selection window according to the tool type",13,2],["F38","F38",1,"Handling of tool index numbers (after tool data exchange)",13,2],["F38","F38",2,"Font size setting for EIA/ISO PROGRAM display and EIA MONITOR display",13,2],["F38","F38",3,"Input method in automatic setting of LENGTH/TOOL SET value",13,2],["F38","F38",4,"Negative tool diameter setting",13,2],["F38","F38",5,"Reverse pattern display/hidden for milling tool rotation direction",13,2],["F39","F39",null,"Plane to be used for an EIA/ISO program (called by a subprogram unit) and a manual program unit",13,2],["F40","F40",null,"Operating method selection in tape mode",13,2],["F41","F41",null,"Threading termination waiting time processing",13,2],["F42","F42",null,"Deceleration area r during Z-axis measurement",13,2],["F43","F43",null,"Measurement area d during Z-axis measurement",13,2],["F44","F44",null,"Measuring speed f",13,2],["F47-F66","F47-F66",null,"Common variable name",13,2],["F68","F68",null,"EIA/ISO bit settings (2 bits)",13,2],["F68","F68",0,"G53.1 acceleration selection during pre-interpolation acceleration/deceleration",13,2],["F68","F68",4,"Addition of tool position offset to the current position, enabled/disabled",13,2],["F69","F69",null,"EIA/ISO program restart method",13,2],["F70","F70",null,"Availability of multiple-machining and designated number of repetitions in the EIA/ISO subprogram",13,2],["F71","F71",null,"Machining order control",13,2],["F72","F72",null,"Selection of the shape correction function of the MAZATROL program",13,2],["F73","F73",null,"M-code execution time for time study",13,2],["F74","F74",null,"S-code execution time for time study",13,2],["F75","F75",null,"T-code execution time for time study",13,2],["F76","F76",null,"B-code execution time for time study",13,2],["F77","F77",null,"Basis rate for tool life judgment",13,2],["F78","F78",null,"Selection of separating ratio of graphic display",13,2],["F79","F79",null,"EIA/ISO bit settings (8 bits)",13,2],["F79","F79",0,"Holding of memory monitor address valid/invalid",13,2],["F79","F79",1,"Selection of menu display",13,2],["F79","F79",2,"Key history function valid/invalid",13,2],["F79","F79",3,"Tool search method",13,2],["F79","F79",4,"Selection of tap gear",13,2],["F79","F79",5,"Display of tools currently in use valid/invalid",13,2],["F79","F79",6,"Initial value of synchronous/asynchronous tapping during tapping tool registration",13,2],["F79","F79",7,"Display of a MAZATROL monitor window valid/invalid",13,2],["F80","F80",null,"EIA/ISO bit settings (8 bits)",13,2],["F80","F80",0,"MAZATROL function valid/invalid",13,2],["F80","F80",1,"Automatic display of the navigation window on the occurrence of an alarm valid/invalid",13,2],["F80","F80",2,"MAINTENANCE CHECK display at power on, displayed/not displayed",13,2],["F80","F80",3,"Third page of the MAINTENANCE CHECK display, displayed/not displayed",13,2],["F80","F80",4,"GRAPHIC MAINTENANCE display on the occurrence of an alarm, displayed/not displayed",13,2],["F80","F80",5,"Learning of cutting conditions valid/invalid",13,2],["F80","F80",6,"Editing on the CUTTING CONDITION LEARN display valid/invalid",13,2],["F80","F80",7,"Destination of spare tool correction by the workpiece measurement",13,2],["F81","F81",null,"EIA/ISO bit settings (7 bits)",13,2],["F81","F81",0,"Program editing prohibited (in 9000’s)",13,2],["F81","F81",2,"Fixed value (0)",13,2],["F81","F81",3,"Add-in MAZATROL valid/invalid",13,2],["F81","F81",4,"Program editing prohibited (in 8000, 9000’s)",13,2],["F81","F81",5,"Program displaying prohibited (in 8000, 9000’s)",13,2],["F81","F81",6,"Retaining the program transfer settings valid/invalid",13,2],["F81","F81",7,"Input error prevention function valid/invalid",13,2],["F82","F82",null,"EIA/ISO bit settings (8 bits)",13,2],["F82","F82",0,"Characteristics estimation result graph, displayed/not displayed",13,2],["F82","F82",1,"Selection of inch/metric representation in POSITION display, TOOL DATA display, and TOOL OFFSET display modes valid/invalid",13,2],["F82","F82",2,"Basis for tool life judgment",13,2],["F82","F82",4,"X-axis diameter display on the POSITION display valid/invalid",13,2],["F82","F82",6,"Automatic setting of the grooving tool length",13,2],["F82","F82",7,"Index tool wear correction setup during automatic operation",13,2],["F83","F83",null,"EIA/ISO bit settings (8 bits)",13,2],["F83","F83",0,"Output of the alarm history data as text data valid/invalid",13,2],["F83","F83",1,"Operation record function valid/invalid",13,2],["F84","F84",null,"EIA/ISO bit settings (8 bits)",13,2],["F84","F84",0,"Selection of whether or not the tool offset data is taken into account for the POSITION counter during the execution of EIA/ISO programs",13,2],["F84","F84",1,"Switching of arguments B and J in a fixed cycle",13,2],["F84","F84",2,"Spare tool search method for EIA/ISO programs",13,2],["F84","F84",3,"Timing to validate new workpiece offset data specified with a system variable",13,2],["F84","F84",4,"Machine coordinate system (G92) selection",13,2],["F84","F84",5,"Incremental/absolute data command in high-speed machining mode",13,2],["F84","F84",6,"Tape run method",13,2],["F84","F84",7,"Operation executed/not executed when the tool data has not bee set",13,2],["F85","F85",null,"EIA/ISO bit settings (8 bits)",13,2],["F85","F85",0,"Table rotational machining",13,2],["F85","F85",1,"Radial interference check",13,2],["F85","F85",2,"Type of coordinate system for controlling the tool tip point",13,2],["F85","F85",3,"Tool tip point control scheme",13,2],["F85","F85",4,"Fixed value (0)",13,2],["F85","F85",5,"Reset to cancel G68.2, valid/invalid",13,2],["F85","F85",6,"Display of surface definition ",13,2],["F85","F85",7,"Output of the B-axis unclamping code before B-axis indexing, valid/invalid",13,2],["F86","F86",null,"EIA/ISO bit settings (7 bits)",13,2],["F86","F86",0,"Output of M250 (Spindle Speed Confirmation) before a turning feed, valid/invalid",13,2],["F86","F86",1,"Milling-spindle start timing for a milling unit (with MILL&TURN. set under TYPE of UNo. 0)",13,2],["F86","F86",2,"Override scheme for G0 during tool tip point control",13,2],["F86","F86",3,"Clamp command output when indexing the B-axis",13,2],["F86","F86",4,"Display of the PART SHAPE window",13,2],["F86","F86",5,"Override scheme for G1 during tool tip point control",13,2],["F86","F86",6,"Selection of rotary axis reference position for tool tip point control",13,2],["F87","F87",null,"EIA/ISO bit settings (8 bits)",13,2],["F87","F87",0,"Selection of whether or not the machine is to be offset by each change only in the deviation vector",13,2],["F87","F87",1,"Selection of whether or not the check for mismatch of the workpiece origin and table rotation center is to be conducted",13,2],["F87","F87",2,"Data alteration checking function valid/invalid (tool-related function)",13,2],["F87","F87",3,"Feed rate display method for the superposition system",13,2],["F87","F87",4,"Single-block mode cancellation during fixed cycle invalid/valid",13,2],["F87","F87",5,"Common variables (#500 and on) are cleared by resetting or at the program end, invalid/valid",13,2],["F87","F87",6,"Local variables are cleared by resetting or at the program end, invalid/valid",13,2],["F87","F87",7,"Common variables (#100 to #199) are cleared by resetting or at the program end, invalid/valid",13,2],["F88","F88",null,"F88",13,2],["F89","F89",null,"EIA/ISO bit settings (8 bits)",13,2],["F89","F89",0,"[For EIA conversion] Output of shape data",13,2],["F89","F89",1,"[For EIA conversion] G-codes for synchronous tapping: G74/G84 or G84.2/G84.3",13,2],["F89","F89",2,"[For EIA conversion] Output of F command",13,2],["F89","F89",3,"[For EIA conversion] Mill-turning unit conversion, alarm/shifted path",13,2],["F89","F89",4,"[For EIA conversion] Output destination, standard area/ backup area",13,2],["F89","F89",6,"[For EIA conversion] Returning to the second zero point before tool change (output of G30)",13,2],["F89","F89",7,"Fixed value (0)",13,2],["F91","F91",null,"EIA/ISO bit settings (8 bits)",13,2],["F91","F91",0,"In response to move command without decimal point, tool moves by 1/tool moves by 10",13,2],["F91","F91",1,"Coordinate system shift using a MAZATROL program, valid/invalid",13,2],["F91","F91",2,"Stroke inside check before movement/Stroke outside check before movement",13,2],["F91","F91",4,"Metric (Initial G20 is valid/invalid)/Inch",13,2],["F91","F91",5,"In response to move command without decimal point:",13,2],["F91","F91",6,"G00 interpolation/non-interpolation",13,2],["F91","F91",7,"G33E command is for the number of threads per inch/command is for thread cutting with precise lead",13,2],["F92","F92",null,"EIA/ISO bit settings (8 bits)",13,2],["F92","F92",0,"Modal at power-on or at reset (G17 or G19/G18)",13,2],["F92","F92",1,"Modal at power-on or at reset (G17 or G19/G18)",13,2],["F92","F92",2,"Dwell command method",13,2],["F92","F92",3,"Tool-length compensation (G43, G44) axis for milling tools",13,2],["F92","F92",4,"Tool-diameter compensation (G41 or G42) start up/cancel type",13,2],["F92","F92",5,"Tool-diameter compensation (G41 or G42) interference check",13,2],["F92","F92",6,"Fixed-cycle hole-drilling axis",13,2],["F92","F92",7,"ACT-/NOSE-R in the TOOL DATA display for an EIA/ISO program, invalid/valid",13,2],["F93","F93",null,"EIA/ISO bit settings (8 bits)",13,2],["F93","F93",0,"Modal at power-on or at reset (G96/G97)",13,2],["F93","F93",1,"Modal at power-on or at reset (G94/G95 for machining centers, G98/G99 for lathes)",13,2],["F93","F93",2,"Modal selection at power on or at reset (G91/G90)",13,2],["F93","F93",3,"Tool length of tool data for an EIA/ISO program, invalid/valid",13,2],["F93","F93",4,"Feed rate during machine lock",13,2],["F93","F93",5,"Middle point during reference-point return",13,2],["F93","F93",6,"Single-block operation mode at user macro operation instruction",13,2],["F93","F93",7,"Fixed value (0)",13,2],["F94","F94",null,"EIA/ISO bit settings (8 bits)",13,2],["F94","F94",0,"Movement to hole-drilling position in fixed-cycle mode",13,2],["F94","F94",1,"External deceleration signal valid/invalid",13,2],["F94","F94",2,"Tool length offset cancellation upon zero point return by G28/G30 or manual operation, enabled/disabled",13,2],["F94","F94",3,"Modal at power-on or at reset (G01/G00)",13,2],["F94","F94",4,"Tool command method using T-codes",13,2],["F94","F94",5,"Fixed value (0)",13,2],["F94","F94",6,"Fixed value (1)",13,2],["F94","F94",7,"Tool offset amount effectuated in an EIA/ISO program",13,2],["F95","F95",null,"EIA/ISO bit settings (8 bits)",13,2],["F95","F95",0,"Interrupt function using user macro instruction, valid/invalid",13,2],["F95","F95",1,"Handling of macroprogram interruption and call",13,2],["F95","F95",2,"Automatic return position to restart the program (Fixed to 1)",13,2],["F95","F95",3,"G00 (positioning) command feed rate for dry run",13,2],["F95","F95",4,"Wear offset check scheme with the input error prevention function enabled",13,2],["F95","F95",5,"Alarm display when the slave or adaptor unit is not connected",13,2],["F95","F95",6,"Manual-pulse interrupt amount cancellation with the RESET key, valid/invalid",13,2],["F95","F95",7,"Coordinate system corresponding to G54 set with the RESET key, valid/invalid",13,2],["F96","F96",null,"EIA/ISO bit settings (7 bits)",13,2],["F96","F96",0,"Selection of variable number for tool offset amount",13,2],["F96","F96",1,"Fairing function valid/invalid",13,2],["F96","F96",2,"Processing for arc command blocks in high-speed machining mode, nonuniform feed/uniform feed",13,2],["F96","F96",4,"Selection of a corner judgment criterion in high-speed machining mode",13,2],["F96","F96",6,"Rotational axis shape correction valid/invalid",13,2],["F97","F97",null,"Selection of G-code of the coordinates system to be used in the EIA conversion function",13,2],["F98","F98",null,"Number of macro variable to be used in the EIA conversion function",13,2],["F99","F99",null,"Offset amount for the subprogram WNo. to the main WNo. concerned in case of output with subprogram in the EIA conversion function",13,2],["F100","F100",null,"Spline cancel length",13,2],["F101","F101",null,"Spline cancel angle",13,2],["F102","F102",null,"Fine spline interpolation curve error (Block including the point of inflection)",13,2],["F103","F103",null,"Spline interpolation fairing block length, 5-axis spline interpolation small block length",13,2],["F104","F104",null,"Fine spline interpolation curve error (block including no inflection point), 5-axis spline interpolation curve error, 5-axis fairing command error",13,2],["F107","F107",null,"Small block judgment length",13,2],["F108","F108",null,"Corner deceleration angle increment value",13,2],["F109","F109",null,"Number of common variables between turrets (#100 onward)",13,2],["F110","F110",null,"Number of common variables between turrets (#500 onward)",13,2],["F111","F111",null,"EIA/ISO bit settings (6 bits)",13,2],["F111","F111",1,"Use/disuse of dry run during thread cutting",13,2],["F111","F111",2,"Use/disuse of feed hold during thread cutting",13,2],["F111","F111",3,"Direction of rotation of the C-axis during C-axial threading with G01.1",13,2],["F111","F111",5,"Tool correction amount selection for EIA/ISO programs",13,2],["F111","F111",6,"Execution mode selection for a fixed turning cycle",13,2],["F111","F111",7,"Form of single-block stop during a fixed turning cycle",13,2],["F112","F112",null,"Selection of measurement data items to be printed out",13,2],["F113","F113",null,"EIA/ISO bit settings (8 bits)",13,2],["F113","F113",0,"Counting all types of use under the same tool number for the tool life management on the TOOL DATA display executed/not executed",13,2],["F113","F113",1,"Data handling on the milling tool of a group that has expired in tool life",13,2],["F113","F113",2,"Data handling on the turning tool of a group that has expired in tool life",13,2],["F113","F113",3,"Tool life management of the FLASH tool",13,2],["F113","F113",4,"Tool life management — Life time",13,2],["F113","F113",5,"Tool life management – Maximum available wear offset data X",13,2],["F113","F113",6,"Tool life management — Maximum available wear offset data Y",13,2],["F113","F113",7,"Tool life management — Maximum available wear offset data Z",13,2],["F114","F114",null,"EIA/ISO bit settings (8 bits)",13,2],["F114","F114",0,"Selection of the maximum C-axial cutting feed rate for the inch system",13,2],["F114","F114",1,"Selection of the operation occurring during the control of the tool tip point when command G49 is issued (when the tool length offset value is canceled)",13,2],["F114","F114",2,"B-axis angle check during measurement of the turning tool for which OUT is specified in “section to be machined”, valid/invalid",13,2],["F114","F114",3,"Moving axes by using G49 (tool length cancel) in G43 (tool length offset) mode, valid/invalid",13,2],["F114","F114",4,"Selecting a rethreading function",13,2],["F114","F114",5,"Output timing of a tool life alarm",13,2],["F114","F114",6,"Initial setting of G53.5",13,2],["F114","F114",7,"Judging tool life from the count of machined workpieces, valid/invalid",13,2],["F116","F116",null,"Feed rate of the threading runout — X-axis",13,2],["F117","F117",null,"Feed rate of the threading runout — Y-axis",13,2],["F118","F118",null,"Feed rate of the threading runout — Z-axis",13,2],["F119","F119",null,"Runout feed rate for the inside diameter threading cycle",13,2],["F120","F120",null,"Clamping speed for the threading cycle — X-axis",13,2],["F121","F121",null,"Clamping speed for the threading cycle — Y-axis",13,2],["F122","F122",null,"Clamping speed for the threading cycle — Z-axis",13,2],["F123","F123",null,"EIA/ISO bit settings (5 bits)",13,2],["F123","F123",1,"Processing of work offset specified with G53.1 for the machine whose table rotary axis is not an axis that rotates around the Z-axis on the INTEGREX type (the machine specification featuring both the tool rotary axis and the table rotary axis)",13,2],["F123","F123",2,"Shape drawing: Validity of a mirroring command specified in the M CODE unit",13,2],["F123","F123",3,"MDI tool change enable/disable for tools with no tool data",13,2],["F123","F123",5,"Execution of the workpiece axis offset in association with Z-axis feed in the hobbing mode independently of hobbing axis rotating status",13,2],["F123","F123",7,"EIA conversion sequence number output",13,2],["F124","F124",null,"Permissible data alteration amount 1 for input error prevention function",13,2],["F125","F125",null,"Permissible data alteration amount 2 for input error prevention function",13,2],["F126","F126",null,"Maximum wear offset setting with the input error prevention function enabled",13,2],["F128","F128",null,"5-axis spline interpolation angular error, 5-axis fairing angular error",13,2],["F129","F129",null,"5-axis spline interpolation corner deceleration coefficient",13,2],["F130","F130",null,"5-axis spline interpolation arc-clamping speed coefficient",13,2],["F135","F135",null,"Tool-drawing accuracy on the VIRTUAL MACHINING or 3D MONITOR display",13,2],["F136","F136",null,"Amount of offset for dummy workpiece shape on the VIRTUAL MACHINING or 3D MONITOR display",13,2],["F137","F137",null,"Number of jaws indicated on the VIRTUAL MACHINING or 3D MONITOR display for No. 1 turning spindle",13,2],["F138","F138",null,"Number of jaws indicated on the VIRTUAL MACHINING or 3D MONITOR display for No. 2 turning spindle",13,2],["F139","F139",null,"Angle offset for the jaws indicated on the VIRTUAL MACHINING or 3D MONITOR display for the No. 1 turning spindle",13,2],["F140","F140",null,"Angle offset for the jaws indicated on the VIRTUAL MACHINING or 3D MONITOR display for the No. 2 turning spindle",13,2],["F142","F142",null,"Background color of spindle override window displayed when the external override function is used",13,2],["F143","F143",null,"EIA/ISO bit settings (7 bits)",13,2],["F143","F143",0,"Operation when workpiece counting is made valid while the automatic operation INTELLIGENT SAFETY SHIELD is enabled",13,2],["F143","F143",1,"Status of [STORE WORKPCE MATERIAL] when the power is turned on",13,2],["F143","F143",3,"Setting of the section to cancel the collision check function between the TOOL EYE sensor and the tool with the INTELLIGENT SAFETY SHIELD being selected",13,2],["F143","F143",5,"X-axis diameter/radius input mode after the G136 command (measurement macro call)",13,2],["F143","F143",6,"Display of WPC during inclined-surface machining on the POSITION display",13,2],["F143","F143",7,"G43 modal cancel selection with the RESET key",13,2],["F144","F144",null,"EIA/ISO bit settings (6 bits)",13,2],["F144","F144",1,"Selection of table rotary axis reference position for inclined-surface machining",13,2],["F144","F144",2,"Resetting of a tool life alarm with the alarm clear button",13,2],["F144","F144",3,"Setting a minus value for argument Q in hobbing, valid/invalid",13,2],["F144","F144",5,"Selection of operation by the G49 command immediately after a macro variable command",13,2],["F144","F144",6,"Deletion of unnecessary codes during EIA/ISO conversion for machining centers",13,2],["F144","F144",7,"Deletion of G92.5 blocks during EIA/ISO conversion for machining centers",13,2],["F145","F145",null,"Rapid feed override when data alteration is detected",13,2],["F146","F146",null,"Selection of the material model’s part to be taken off (hidden) on the VIRTUAL MACHINING and 3D MONITOR displays in the flow of turning operation under synchronization of both spindles",13,2],["F148","F148",null,"Compensation amount for G41/G42 given in a manual program (MANL PRG) unit",13,2],["F149","F149",null,"Operation between blocks when single block mode is switched from ON to OFF during automatic operation",13,2],["F150","F150",null,"Output data offset of NC basic information for field network",13,2],["F151","F151",null,"EIA/ISO bit settings (6 bits)",13,2],["F151","F151",0,"Switching of valid/invalid for registering multiple tools",13,2],["F151","F151",1,"Fixed value",13,2],["F151","F151",2,"Switching of the material geometry when execution of a program is returned to the head during continuous program run",13,2],["F151","F151",5,"Rotary axis fairing for the 5-axis fairing function",13,2],["F151","F151",6,"Valid/invalid of wear offset (mill tool/touch sensor) on the TOOL DATA display when the tool length offset function for turning tools (G43P1) is used",13,2],["F151","F151",7,"Time stamp used at the time of read/write command to macro variable #3001 (power-on time)",13,2],["F152","F152",null,"Fixed value (0)",13,2],["F153","F153",null,"SMART font display, valid/invalid",13,2],["F154","F154",null,"Parameter for system internal setting Setting prohibited",13,2],["F155","F155",null,"EIA/ISO bit settings (4 bits)",13,2],["F155","F155",0,"Material geometry display for programs converted into the EIA format",13,2],["F155","F155",3,"Operation when argument I is omitted from the tap cycle command having argument Q",13,2],["F155","F155",5,"Setup data editing during automatic GL operation, disabled/enabled",13,2],["F155","F155",7,"Setting of the spindle to be displayed in the results of machining navigation for the mill-turning unit",13,2],["F156","F156",null,"EIA/ISO bit settings (8 bits)",13,2],["F156","F156",0,"The operating status and the drawing on the 3D MONITOR display when a cutting command associated with rotary axis movement is specified with the automatic ISS valid",13,2],["F156","F156",1,"The operating status and the drawing on the 3D MONITOR display when a cutting command associated with rotary axis movement is specified with the automatic ISS valid",13,2],["F156","F156",2,"Separation between rotary axis and linear axis when moving axes during workpiece placement error correction",13,2],["F156","F156",3,"Selection of solution to workpiece placement error correction (primary rotary axis sign prioritized)",13,2],["F156","F156",4,"Pitch division in the case when the arc length exceeds the maximum value during helical/spiral interpolation",13,2],["F156","F156",5,"Single-block stop when the VFC key is pressed with override set to 100%",13,2],["F156","F156",6,"Fixed value (0)",13,2],["F156","F156",7,"Geometric deviation compensation function, valid/invalid",13,2],["F157","F157",null,"EIA/ISO bit settings (8 bits)",13,2],["F157","F157",0,"Fixed value (0)",13,2],["F157","F157",1,"Geometry compensation/modal spline tolerance (chord error) input, valid/invalid",13,2],["F157","F157",2,"EIA tip position memory",13,2],["F157","F157",3,"MAZATROL table selection unit (2 tables) on the VIRTUAL MACHINING, 3D MONITOR, or 3D SETUP display",13,2],["F157","F157",4,"Switching of the axis directions for the VTC machine model on the VIRTUAL MACHINING or 3D MONITOR display",13,2],["F157","F157",5,"Add-in EIA function",13,2],["F157","F157",6,"5-axis fairing function",13,2],["F157","F157",7,"Whether or not to set 5-axis spline interpolation tolerance (chord error) specified curve error",13,2],["F158","F158",null,"EIA/ISO bit settings (8 bits)",13,2],["F158","F158",0,"Tool length/tool diameter check function after tool change",13,2],["F158","F158",1,"Output timing of MSTB command after a movement command under geometry compensation",13,2],["F158","F158",2,"Display of an angle holder in the rotation direction selection menu",13,2],["F158","F158",3,"Drawing mode of the upper and lower turrets during Y-axis turning/pinch-cutting",13,2],["F158","F158",4,"Distinguishing the unit number that matches the selected head by color when the compound type MAZATROL program is displayed in the process selection window",13,2],["F158","F158",5,"Output of an alarm when a process is selected for the head differing from the selected head in the process selection window where the compound type MAZATROL program is displayed",13,2],["F158","F158",6,"Bar loader schedule function, valid/invalid",13,2],["F158","F158",7,"Selection of wear offset direction when the tool length compensation and 3D coordinate conversion functions are used together",13,2],["F159","F159",null,"EIA/ISO bit settings (8 bits)",13,2],["F159","F159",0,"Timing of data creation for the MACHINING NAVIGATION - RESULT display with workpiece counting made valid",13,2],["F159","F159",1,"Modal selection at power on or at reset (G64/G61.1)",13,2],["F159","F159",2,"Fixed value",13,2],["F159","F159",3,"Fixed value",13,2],["F159","F159",4,"Whether or not to display on the POSITION display a spindle output diagram stored in the setting file",13,2],["F159","F159",5,"Workpiece spindle (C-axis) clamping speed selection in hobbing",13,2],["F159","F159",6,"Reflecting tool offset (tool wear offset/tool geometry offset) in the G53.5 mode in the current position",13,2],["F159","F159",7,"Offset direction judgment selection for steps for workpiece measurement",13,2],["F160","F160",null,"EIA/ISO bit settings (7 bits)",13,2],["F160","F160",1,"Feedrate display during tool tip point control",13,2],["F160","F160",2,"Fixed value",13,2],["F160","F160",3,"Use of TC45 in interference check",13,2],["F160","F160",4,"Display of the measured value on the AUTO MEASURE display in O.D./I.D. measurement, diameter/radius",13,2],["F160","F160",5,"Alarm output when the actual measurement of the C-axis coordinate is carried out with the sensor ON because it did not go off due to insufficient C-axis return distance after temporary measurement of the C-axis coordinate",13,2],["F160","F160",6,"Switching the collision check method during automatic operation with the ISS function set valid when measuring a tool by the TOOL EYE",13,2],["F160","F160",7,"Priority change when erasing the tool path from the TOOL PATH CHECK display or TRACE display",13,2],["F161","F161",null,"EIA/ISO bit settings (7 bits)",13,2],["F161","F161",0,"Shape/wear offset number separation, valid/invalid",13,2],["F161","F161",1,"Shape offset handling",13,2],["F161","F161",3,"Tool offset vector handling if reset function is executed",13,2],["F161","F161",4,"Shape offset handling if offset number 0 is entered",13,2],["F161","F161",5,"Simplified wear offset, valid/invalid",13,2],["F161","F161",6,"C/Z offset when a MAZATROL program is called from an EIA program",13,2],["F161","F161",7,"C/Z offset when an EIA program is called from a MAZATROL program",13,2],["F162","F162",null,"EIA/ISO bit settings (8 bits)",13,2],["F162","F162",0,"Movement/No movement according to the particular amount of offset during independent start of tool tip point control",13,2],["F162","F162",1,"Type of passage of tool tip point through singular point",13,2],["F162","F162",2,"Chamfer/corner R-command address selection",13,2],["F162","F162",3,"Fixed hole-machining cycle return selection",13,2],["F162","F162",4,"6 digits in T-command for turning",13,2],["F162","F162",5,"Use of the M Pro scheme as the method of selecting the Length correction axis bit",13,2],["F162","F162",6,"MAZATROL program check for missing Z-offset, valid/invalid",13,2],["F162","F162",7,"Encoder polarity selection",13,2],["F163","F163",null,"EIA/ISO bit settings (7 bits)",13,2],["F163","F163",0,"Bar feeder scheduling function, valid/invalid",13,2],["F163","F163",1,"Incorporation of wear offset data into the current position display in EIA/ISO program mode, valid/invalid",13,2],["F163","F163",2,"Incorporation of wear offset data into the current position display in MAZATROL program mode, valid/invalid",13,2],["F163","F163",3,"Position of thread turning tool nose on the VIRTUAL MACHINING display",13,2],["F163","F163",4,"Barrier check on the VIRTUAL MACHINING display valid/invalid",13,2],["F163","F163",6,"Menu on the DATA I/O display (tape), displayed/hidden",13,2],["F163","F163",7,"Menu on the DATA I/O display (CMT), displayed/hidden",13,2],["F164","F164",null,"EIA/ISO bit settings (6 bits)",13,2],["F164","F164",0,"Automatic tool data setting conditions Magazine (turret) tool",13,2],["F164","F164",2,"PROGRAM LAYOUT display save function selection",13,2],["F164","F164",4,"Automatic tool data setting conditions Invalid tools",13,2],["F164","F164",5,"Automatic tool data setting conditions Broken tools",13,2],["F164","F164",6,"Automatic tool data setting conditions Expired tools",13,2],["F164","F164",7,"Automatic tool data setting conditions Life warning tools",13,2],["F165","F165",null,"EIA/ISO bit settings (7 bits)",13,2],["F165","F165",1,"X-axis movement to minus side during polar coordinate interpolation, enabled/disabled",13,2],["F165","F165",2,"Polar coordinate interpolation of the C-axis, in radius/diameter",13,2],["F165","F165",3,"C-axis indexing when EIA subprogram is called from MAZATROL program",13,2],["F165","F165",4,"Modal or non-modal state of Q command in deep-hole drilling cycle",13,2],["F165","F165",5,"Conversion of tool set data for milling tool based on head swivel angle when G53.5 is commanded",13,2],["F165","F165",6,"Behavior of automatic operation of an EIA program when Z-offset is not set",13,2],["F165","F165",7,"Setting at CONTI. of the end unit during tool path check, valid/invalid",13,2],["F166","F166",null,"EIA/ISO bit settings (7 bits)",13,2],["F166","F166",0,"Alteration of tool set value (tool length) on the TOOL DATA display in the automatic operation mode, enabled/disabled",13,2],["F166","F166",1,"Type of wear offset indicated in the milling tool list on the TOOL DATA display",13,2],["F166","F166",2,"ID No./Tool name selection on the TOOL DATA display",13,2],["F166","F166",3,"Selection whether the selected plane on the TRACE or TOOL PATH CHECK display is to be held",13,2],["F166","F166",4,"Operation conducted when [RESTART] is tapped following completion of the search in EIA modal restarting mode",13,2],["F166","F166",5,"Tool diameter auto-setting for the end mill, face mill, and ball end mill on the TOOL DATA display",13,2],["F166","F166",7,"Automatic backup function",13,2],["F167","F167",null,"EIA/ISO bit settings (8 bits)",13,2],["F167","F167",0,"Threading (by turning) shift angle (Q-command) unit",13,2],["F167","F167",1,"Handling the diameter/radius of point R during the hole-machining fixed cycle",13,2],["F167","F167",2,"Handling the tool measured using the G137H command",13,2],["F167","F167",3,"Handling the single-process mode when operation is completed/reset",13,2],["F167","F167",4,"Connecting the path linearly/Alarm, if the arc internal correction value is greater than the arc radius",13,2],["F167","F167",5,"Handling the X-axis command in G68.5",13,2],["F167","F167",6,"Wear correction direction",13,2],["F167","F167",7,"Updating the current position by a press of the RESET key in manual operation mode",13,2],["F168","F168",null,"EIA/ISO bit settings (7 bits)",13,2],["F168","F168",0,"Selection of operation to perform when dynamic offset is canceled",13,2],["F168","F168",2,"Rotational center offset is added/not added to the tool length when the tool axial tool length offset command (G43.1) is issued.",13,2],["F168","F168",3,"Axis for the milling tool wear correction and TOOL EYE compensation amount for the B-axis rotational turret",13,2],["F168","F168",4,"Conversion of 3D coordinate conversion into inclined-surface machining",13,2],["F168","F168",5,"Holding the amount of manual handle pulse interruption",13,2],["F168","F168",6,"[RESTART2 NONMODAL] during stop of an EIA program execution invalid/valid",13,2],["F168","F168",7,"Correction pattern for the groove/protrusion width measurement",13,2],["F169","F169",null,"EIA/ISO bit settings (6 bits)",13,2],["F169","F169",1,"Rapid feed overlapping function",13,2],["F169","F169",2,"The function to restart machine operation after the detection of collision by the INTELLIGENT SAFETY SHIELD function",13,2],["F169","F169",3,"Fixed value (0)",13,2],["F169","F169",4,"Handling of smooth corner control setting width when G61.1 is specified in MAZATROL programs",13,2],["F169","F169",5,"Calling of the program specified in the end unit upon reaching the target part count, enabled/disabled",13,2],["F169","F169",7,"Fixed value (0)",13,2],["F170","F170",null,"EIA/ISO bit settings (3 bits)",13,2],["F170","F170",0,"Consideration of the offset amount of dynamic offsetting II at the current position",13,2],["F170","F170",2,"Tool offset changed in an EIA program in a tool path check",13,2],["F170","F170",3,"Continuous diameter display of the X-axis coordinates on the POSITION screen",13,2],["F241","F241",null,"Operation when address P is omitted in G297/G298 command",13,2],["F242","F242",null,"Threshold for the travel ratio between the tool tip point and machine end point for time study",13,2],["F268","F268",null,"Corner rounding in the cutting point command mode",13,2],["F269","F269",null,"Fixed value (1)",13,2],["F270","F270",null,"Smooth corner control function: Setting width",13,2],["F271","F271",null,"Smooth corner control function: Arc cutting clamp speed coefficient",13,2],["F272","F272",null,"Smooth corner control function: Arc cutting clamp speed coefficient for high-speed smooth control",13,2],["F273","F273",null,"Smooth corner control function: Cancellation angle",13,2],["F274","F274",null,"Cutting feedrate override rate in the tool axial direction for the EIA/ISO engraving function",13,2],["F275","F275",null,"Character depth for the EIA/ISO engraving function",13,2],["F276","F276",null,"Character height for the EIA/ISO engraving function",13,2],["F277","F277",null,"Retraction height for the EIA/ISO engraving function",13,2],["F300","F300",null,"INTELLIGENT SAFETY SHIELD: Cutting accuracy",13,2],["F301","F301",null,"INTELLIGENT SAFETY SHIELD: Tool path accuracy for collision check processing",13,2],["F302","F302",null,"Allowance in rapid feed stop in deep-hole boring cycle",13,2],["F303","F303",null,"G01 feed-in speed for deep-hole boring cycle M, E",13,2],["F304","F304",null,"Alarm wait time during [CUT] restarting search during VIRTUAL MACHINING",13,2],["F326","F326",null,"Automatic operation intelligent safety shield (ISS)/virtual machining interference check selection",13,2],["F328","F328",null,"Real time tuning II Number of buffers for calculating the average of optimum time constants",13,2],["F329","F329",null,"EIA/ISO bit settings (4 bits)",13,2],["F329","F329",0,"Operation at specification of undefined SMC data number",13,2],["F329","F329",2,"Mating tool selection function for automatic tool length setting of FLASH tool",13,2],["F329","F329",3,"Automatic M code output for smooth restart",13,2],["F329","F329",4,"Operation to return to the restarting position for smooth restart",13,2],["F330","F330",null,"EIA/ISO bit settings (4 bits)",13,2],["F330","F330",0,"Hobbing selection",13,2],["F330","F330",1,"Hobbing axis (V-axis) clamping speed selection in hobbing (position controlled hobbing)",13,2],["F330","F330",2,"Machine coordinate display of hobbing axis (V-axis) and workpiece spindle (C-axis) in hobbing (position controlled hobbing)",13,2],["F330","F330",7,"Life count for multiple tools with the same tool number and different tool names",13,2],["F331","F331",null,"EIA/ISO bit settings (6 bits)",13,2],["F331","F331",1,"Synchronized tapping feed command mode",13,2],["F331","F331",2,"Command unit for thread cutting shift angle (Q command), for the G-code series for machining centers",13,2],["F331","F331",3,"Safe spindle speed calculation",13,2],["F331","F331",4,"Shape sequence specification at restart in a MAZATROL program",13,2],["F331","F331",5,"Outputting alarm upon specification of shaping (G41.1/G42.1) in the geometry compensation mode (G61.1)",13,2],["F331","F331",6,"Fixed value (0)",13,2],["F335","F335",null,"EIA/ISO bit settings (4 bits)",13,2],["F335","F335",0,"Tool nose center speed clamp operation in the cutting point command mode",13,2],["F335","F335",1,"Disabling linear axis distortion cancel in the 5-axis spline interpolation mode",13,2],["F335","F335",2,"Disabling rotary axis distortion cancel in the 5-axis spline interpolation mode",13,2],["F335","F335",7,"Action to take when the part count is set using the program with the INTELLIGENT SAFETY SHIELD enabled for automatic operation",13,2],["F336","F336",null,"EIA/ISO bit settings (5 bits)",13,2],["F336","F336",0,"Control mode selection for rapid feed in the cutting point command mode",13,2],["F336","F336",1,"Cutting point selection in a singular posture in the cutting point command mode",13,2],["F336","F336",2,"Variable acceleration control G0",13,2],["F336","F336",6,"Variable acceleration control",13,2],["F336","F336",7,"Super-high-speed machining",13,2],["E1","E1",null,"Closed-pattern cutting start point and escape point setting element",14,2],["E2","E2",null,"Cutting start point and escape point setting element (the first clearance)",14,2],["E4","E4",null,"Reference allowance of finishing in radial direction",14,2],["E5","E5",null,"Element used to set the cutting start point and escape point (the second clearance)",14,2],["E6","E6",null,"Reference allowance of finishing in axial direction",14,2],["E7","E7",null,"Allowance of cutting start point in axial direction (the second clearance)",14,2],["E8","E8",null,"Radial interference clearance of chamfering cutter",14,2],["E9","E9",null,"Allowance of axial-cutting start position (the first clearance)",14,2],["E10","E10",null,"Depth-of-cut-R automatic setting element (Face milling, End milling-top, End milling-step)",14,2],["E11","E11",null,"Axial interference clearance of chamfering cutter",14,2],["E12","E12",null,"Radial interference clearance of face milling unit and angular face milling unit",14,2],["E13","E13",null,"Tool path setting element for end milling-top unit",14,2],["E14","E14",null,"Depth-of-cut-R automatic setting element (Pocket milling, Pocket milling-mountain, Pocket milling-valley)",14,2],["E15","E15",null,"Tool path setting element for face milling-top unit (reciprocating short)",14,2],["E16","E16",null,"Peripheral-cutting feed rate override for end milling-mountain unit",14,2],["E17","E17",null,"Axial-cutting feed rate override",14,2],["E18","E18",null,"Override in case of the overall width cutting for pocket-machining",14,2],["E19","E19",null,"Returning feed rate override in case of bidirectional cutting for rough-machining of the end milling-slot unit.",14,2],["E20","E20",null,"Axial cutting feed override during Z-axial cutting in the pecking mode of face machining",14,2],["E21","E21",null,"Wall-cutting overlap in closed figure",14,2],["E22","E22",null,"Override value of automatic corner over-riding",14,2],["E23","E23",null,"Effective removal allowance (upper limit) of automatic corner overriding",14,2],["E24","E24",null,"Effective removal allowance (lower limit) of automatic corner overriding",14,2],["E25","E25",null,"Effective angle (upper limit) of automatic corner overriding",14,2],["E26","E26",null,"Calculation coefficient for the finishing feed of line milling",14,2],["E27","E27",null,"Radial direction feed rate calculation reference diameter for finish cutting in line machining unit",14,2],["E28","E28",null,"Finishing feed rate calculation reference feed rate in line machining unit",14,2],["E29","E29",null,"Selection of whether the cutting conditions in the shape sequence during VFC mode are to be modified",14,2],["E30","E30",null,"An element that determines the starting point and escape point of radial cutting when CLOSED is specified for the wall attributes at the starting point and ending point of open-pattern line machining",14,2],["E31","E31",null,"Element that determines the amount of OPEN attribute wall protrusion in pocket-machining shape units",14,2],["E32","E32",null,"Element used for automatically determining the approach radius in a Z-direction helical approach",14,2],["E33","E33",null,"Element used for automatically determining the amount of in-feed per revolution in the Z-axis direction in a Z-direction helical approach",14,2],["E34","E34",null,"Element that automatically determines an approaching distance in a Z-direction tapered approach scheme",14,2],["E35","E35",null,"Approaching gradient for a Z-direction tapered approach scheme",14,2],["E36","E36",null,"Element that automatically determines an escape distance in the Z-direction tapered escape scheme",14,2],["E37","E37",null,"The amount of return of pecking in the Z-axial pecking mode of face machining",14,2],["E38","E38",null,"The returning feed rate of pecking in the Z-axial pecking mode of face machining",14,2],["E39","E39",null,"Element that automatically determines the depth-of-cut-R (Pocket milling, Pocket milling-mountain, Pocket milling-valley, End milling-slot)",14,2],["E40","E40",null,"Element used for automatically determining the approach radius in a Z-direction helical approach (helical 2)",14,2],["E41","E41",null,"Element used for automatically determining the amount of in-feed per revolution in the Z-axis direction in a Z-direction helical approach (helical 2)",14,2],["E43","E43",null,"Magnification factor of surface speed in helical approach",14,2],["E55","E55",null,"3-D Axial cutting-feed overriding",14,2],["E56","E56",null,"3-D, Inversion check of curved-surface pattern",14,2],["E57","E57",null,"3-D, Severity check of cutting pitch",14,2],["E58","E58",null,"3-D, Tool-diameter compensation",14,2],["E59","E59",null,"3-D, Allowance of axial-cutting start position",14,2],["E60","E60",null,"3-D, Normal cutting allowance",14,2],["E61","E61",null,"3-D, Search length for parallel cutting",14,2],["E62","E62",null,"3-D, Search length for right-angle cutting",14,2],["E63","E63",null,"3-D, Pattern display division segment (FL direction)",14,2],["E64","E64",null,"3-D, Pattern display division segment (GL direction)",14,2],["E65","E65",null,"3-D, Radial cutting allowance for area check",14,2],["E66","E66",null,"3-D, Axial cutting allowance for area check",14,2],["E67-E75","E67-E75",null,"3-D, Processing error tolerance",14,2],["E76","E76",null,"3-D, Entire-width override",14,2],["E77","E77",null,"3-D, Radial cutting allowance for high-speed rough processing (workpiece size appointment)",14,2],["E78","E78",null,"3-D, Multiplying factor set for tolerance",14,2],["E83","E83",null,"3-D, Region of radial machining during high-speed rough processing (offset appointment)",14,2],["E84","E84",null,"3-D, Region of axial machining during high-speed rough processing (offset appointment)",14,2],["E85","E85",null,"3-D, Region of radial machining during high-speed rough processing: –X (workpiece size appointment)",14,2],["E86","E86",null,"3-D, Region of radial machining during high-speed rough processing: +X (workpiece size appointment)",14,2],["E87","E87",null,"3-D, Region of radial machining during high-speed rough processing: –Y (workpiece size appointment)",14,2],["E88","E88",null,"3-D, Region of radial machining during high-speed rough processing: +Y (workpiece size appointment)",14,2],["E89","E89",null,"3-D, Region of axial machining during high-speed rough processing (workpiece size appointment)",14,2],["E91","E91",null,"Tool-path pattern selection for end milling-mountain unit",14,2],["E92","E92",null,"Tool-path pattern selection for pocket milling unit",14,2],["E93","E93",null,"Tool-path pattern selection for pocket milling-mountain unit",14,2],["E94","E94",null,"Tool-path pattern selection for pocket milling-valley unit",14,2],["E95","E95",null,"Tool-path pattern selection for line-machining unit",14,2],["E96","E96",null,"LINE/FACE/3D bit settings (5 bits)",14,2],["E96","E96",1,"R-point height for end milling-slot unit",14,2],["E96","E96",2,"Approach method selection for 2nd and subsequent rounds of cutting in end milling-slot unit",14,2],["E96","E96",4,"Approach point for 2nd and subsequent rounds of cutting in end milling-slot unit",14,2],["E96","E96",5,"Returning feed rate override of the end milling-slot unit",14,2],["E96","E96",7,"Smooth chamfering (end milling-slot): Switching of restrictions according to the cutting edge angle of the chamfering tool",14,2],["E97","E97",null,"Tool-path pattern selection for end milling-top unit",14,2],["E98","E98",null,"Cutting method selection for end milling-mountain, pocket milling-valley unit",14,2],["E99","E99",null,"LINE/FACE/3D bit settings (6 bits)",14,2],["E99","E99",0,"Milling feed rate specification range for the shape sequence of the MAZATROL program",14,2],["E99","E99",1,"Bottom/wall simultaneous finishing mode for pocket machining",14,2],["E99","E99",3,"Interference check between the approach point and the cutting starting point of face machining",14,2],["E99","E99",4,"Alarm generating condition during the approach or escape for line machining",14,2],["E99","E99",5,"Smooth chamfering Stopping position during single block operation",14,2],["E99","E99",6,"Machining start point calculation method after automatic determination of approach point in line machining unit",14,2],["E104","E104",null,"LINE/FACE/3D bit settings (8 bits)",14,2],["E104","E104",0,"Cutting method to be used after an approach point is automatically determined during line/face machining",14,2],["E104","E104",1,"Returning position during face machining",14,2],["E104","E104",2,"Returning position during line machining",14,2],["E104","E104",3,"Infeed position when a CLOSED attribute is assigned to the wall of line machining",14,2],["E104","E104",4,"Method of connecting between shapes during line machining",14,2],["E104","E104",5,"Method of connecting between shapes during wall finish of face machining",14,2],["E104","E104",6,"Calculation of the ZC machining feed rate",14,2],["E104","E104",7,"Tool change command output selection",14,2],["E105","E105",null,"LINE/FACE/3D bit settings (8 bits)",14,2],["E105","E105",0,"B-axis user-defined angle setting during C-axis central line machining",14,2],["E105","E105",1,"Machining shape specification method in line machining in ZC mode/on C-axis",14,2],["E105","E105",2,"Z-axis sign inversion at ZC/ZY during line/face machining on the MULTIPLEX HD2 side",14,2],["E105","E105",3,"M640T compatible operation selection on the MULTIPLEX HD2 side",14,2],["E105","E105",4,"CW direction selection during line/face machining in the composite program on the MULTIPLEX HD2 side (engraving unit excluded)",14,2],["E105","E105",5,"C-axis angle selection during Y-axis milling on the MULTIPLEX HD2 side",14,2],["E105","E105",6,"Reference plane for the chamfering program of the LINE RGT/LINE LFT/LINE IN unit in the ZC mode line machining (cylindrical surface)",14,2],["E105","E105",7,"Operation when tool path generation using WID-R specified for pocket milling fails",14,2],["E106","E106",null,"LINE/FACE/3D bit settings (2 bits)",14,2],["E106","E106",0,"Selection of the initial point as a relay point to be used after TPC approach (line/face machining unit)",14,2],["E106","E106",1,"Selection of a relay point to be used before TPC escapement (line/face machining unit)",14,2],["E108","E108",null,"LINE/FACE/3D bit settings (4 bits)",14,2],["E108","E108",0,"Display of a warning message when a corner radius is automatically inserted to a shape during intelligent pocket milling (IPM) path creation",14,2],["E108","E108",1,"Display of a warning message when an uncut residue remains due to nose R during intelligent pocket milling (IPM) path creation",14,2],["E108","E108",4,"Execution of a full-circle path movement after helical approach in intelligent pocket milling (IPM) machining",14,2],["E108","E108",5,"Operation on failure of tool entry during intelligent pocket milling (IPM)",14,2],["E109","E109",null,"Allowable limits of engage angle in intelligent pocket milling (IPM) machining",14,2],["E110","E110",null,"Maximum radius of arc inserted for intelligent pocket milling (IPM) machining",14,2],["E111","E111",null,"Element that determines the tool paths in intelligent pocket milling (IPM) machining (Pocket milling-valley)",14,2],["E112","E112",null,"Maximum wall avoidance distance in intelligent pocket milling (IPM) machining",14,2],["E113","E113",null,"Bottom face avoidance distance/clearance for recovering surface speed in plane machining",14,2],["E115","E115",null,"Magnification factor of the minimum arc of trochoid cycle in intelligent pocket milling (IPM) machining",14,2],["E116","E116",null,"Feedrate override for non-cutting feed in intelligent pocket milling (IPM) machining",14,2],["E129","E129",null,"Amount of overlapping in groove expanding operation in the end milling-slot unit",14,2],["E130","E130",null,"Smooth chamfering (end milling slot): tolerance between the interpolated line segments and the ideal curve",14,2],["E131","E131",null,"Element that automatically determines depth-of-cut-R (line machining)",14,2],["E132","E132",null,"Radial interference clearance of round bar face milling unit",14,2],["E133","E133",null,"Surface speed change position in helical approach",14,2],["E134","E134",null,"Clearance in the tool axial direction in engraving units",14,2],["E141","E141",null,"LINE/FACE/3D bit settings (6 bits)",14,2],["E141","E141",0,"Selection of the feedrate in C-axis plane machining in the ZC mode",14,2],["E141","E141",1,"Face milling-/end milling-top unit: Cutting start point determination method at manual approach point setting",14,2],["E141","E141",2,"Round bar face milling unit: Approach point/cutting start point before automatic approach point setting",14,2],["E141","E141",3,"Round bar face milling unit: Cutting start point after automatic approach point setting",14,2],["E141","E141",5,"Surface speed change mode selection in helical approach",14,2],["E141","E141",7,"Operation upon specifying a figure of eight for free closed pattern of line/face machining unit",14,2],["D1","D1",null,"Height of the second R-point during point machining",15,2],["D2","D2",null,"Nominal diameter of spot-machining tool",15,2],["D3","D3",null,"Number of revolutions during dwell at hole bottom in spot-machining cycle",15,2],["D4","D4",null,"Maximum allowable spot-chamfering hole diameter element",15,2],["D5","D5",null,"Prehole through speed during inversed spot-facing",15,2],["D6","D6",null,"Drill-machining cycle setting element",15,2],["D7","D7",null,"Drill-machining cycle setting element",15,2],["D8","D8",null,"Maximum diameter of holes machinable on one drill",15,2],["D9","D9",null,"Maximum diameter of holes machinable on two drills",15,2],["D10","D10",null,"Maximum diameter of holes machinable on three drills",15,2],["D11","D11",null,"Through-hole/tap-prehole machining overshoot",15,2],["D12","D12",null,"Stop-hole machining hole-bottom clearance",15,2],["D13","D13",null,"Spot-machining hole diameter (fixed value)",15,2],["D14","D14",null,"Depth-of-cut setting element for drilling (ALMINUM)",15,2],["D15","D15",null,"Depth-of-cut setting element for drilling (except AL)",15,2],["D16","D16",null,"Number of revolutions during dwell at hole bottom for chamfering cutter or spot-machining tool in chamfering cycle",15,2],["D17","D17",null,"Interference clearance of chamfering cutter",15,2],["D18","D18",null,"Return feed rate for reaming or boring (cycle 3)",15,2],["D19","D19",null,"Number of revolutions during dwell at hole bottom for end milling",15,2],["D20","D20",null,"Radial depth-of-cut setting element for end milling",15,2],["D21","D21",null,"Reference bottom-finishing allowance for end milling",15,2],["D22","D22",null,"Tapping-cycle dwell time",15,2],["D23","D23",null,"Prehole clearance for end milling",15,2],["D24","D24",null,"Number of revolutions during dwell at hole bottom for boring",15,2],["D25","D25",null,"Boring-bar tip relief",15,2],["D26","D26",null,"Returning distance from hole bottom for boring or back-boring",15,2],["D28","D28",null,"Bottom-finishing amount of boring",15,2],["D29","D29",null,"Chip removal time",15,2],["D30","D30",null,"Number of incomplete threads in tapping cycle",15,2],["D31","D31",null,"Tapper elongation amount for tapping",15,2],["D32","D32",null,"Number of spindle revolutions until spindle CCW rotation begins in tapping cycle",15,2],["D33","D33",null,"Back-boring tool tip relief",15,2],["D35","D35",null,"Prehole-drilling diameter setting element for reamer (drilling)",15,2],["D36","D36",null,"Prehole-drilling diameter setting element for reamer (boring)",15,2],["D37","D37",null,"Prehole-drilling diameter setting element for reamer (end milling)",15,2],["D38","D38",null,"Reamer-prehole diameter setting element for boring or end milling",15,2],["D39","D39",null,"Reamer-prehole diameter setting element for end milling",15,2],["D40","D40",null,"Number of revolutions during dwell at spot-faced hole bottom for inversed spot-facing",15,2],["D41","D41",null,"R-point height during point-machining",15,2],["D42","D42",null,"Height of the third R-point during point machining",15,2],["D43","D43",null,"Number of incomplete threads in tapping cycle for piped screw",15,2],["D44","D44",null,"Selecting an automatic calculation method for the amount of chamfer with the tapping unit",15,2],["D45","D45",null,"Gradual decrements in drilling depth",15,2],["D46","D46",null,"Minimum gradual drilling depth",15,2],["D47","D47",null,"Reamer-prehole machining overshoot",15,2],["D48","D48",null,"Feed override for the section to be chamfered in the planetary tapping cycle",15,2],["D49","D49",null,"Amount of return at hole bottom during the planetary tapping cycle",15,2],["D50","D50",null,"Auto-set feed rate for pre-hole machining in the planetary tapping cycle",15,2],["D51","D51",null,"Auto-set feed rate for planetary tapping cycle",15,2],["D52","D52",null,"Reduction ratio for the G00-based relief rate during a very-deep-hole drilling cycle",15,2],["D53","D53",null,"Number of times of pecking up to the return of the tool to a position near the starting point of the very-deep-hole drilling cycle of a drilling or turning-drilling unit",15,2],["D54","D54",null,"Deceleration rate at cutting start for very-deep-hole drilling cycle/decremental very-deep-hole machining cycle",15,2],["D55","D55",null,"Drilling return distance for very-deep-hole drilling cycle/decremental very-deep-hole machining cycle",15,2],["D56","D56",null,"Number of revolutions during dwell at chip ejection position and hole bottom for very-deep-hole drilling cycle/decremental very-deep-hole machining cycle",15,2],["D57","D57",null,"Return speed for very-deep-hole drilling cycle/decremental very-deep-hole machining cycle",15,2],["D58","D58",null,"Feed rate reduction distance ratio at cutting start of a very-deep-hole drilling cycle/decremental very-deep-hole machining cycle",15,2],["D59","D59",null,"Surface speed reduction ratio at cutting end of a very-deep-hole drilling cycle/decremental very-deep-hole machining cycle",15,2],["D60","D60",null,"Automatic setting ratio of axial cutting feed rate during chamfering",15,2],["D61","D61",null,"Nominal diameter of chamfering cutter, set during automatic tool development for a point machining unit",15,2],["D62","D62",null,"Maximum number of times automatic pecking is to be performed by MAZATROL programs",15,2],["D63","D63",null,"Smooth chamfering (point machining): overlap amount",15,2],["D64","D64",null,"Smooth chamfering (point machining): tolerance between the interpolated line segment and the ideal curve",15,2],["D66","D66",null,"Reduction ratio for the G00 feed rate from the chip ejection position to the return position during a deep-hole drilling/very-deep-hole drilling cycle",15,2],["D73-D77","D73-D77",null,"Learning of cutting conditions (DEP-Z range)",15,2],["D78-D82","D78-D82",null,"Learning of cutting conditions (WID-R range)",15,2],["D91","D91",null,"POINT bit settings (8 bits)",15,2],["D91","D91",0,"M04 is output/not output after the tool has dwelled at the hole bottom during a tapping cycle.",15,2],["D91","D91",1,"The tool dwells/does not dwell after M04 has been output at the hole bottom during a tapping cycle.",15,2],["D91","D91",2,"The tool dwells/does not dwell after it has been returned to the R-point during a tapping cycle.",15,2],["D91","D91",3,"If a drill is used in the pre-machining of the centering drill cycle, the R-point height is set to D1 or not.",15,2],["D91","D91",4,"The finishing tool path is shortened/not shortened during a true-circle processing cycle (end milling).",15,2],["D91","D91",5,"The tool path is shortened/not shortened during a true-circle processing cycle (chamfering).",15,2],["D91","D91",6,"If a pre-machining tool sequence is included in the same unit, the R-point height of the drill is set/not set to D1 or D42.",15,2],["D91","D91",7,"The R-point height of the chamfering cutter during the cycle 2 is set to D42 or not. The R-point height of the spot-machining tool during the chamfering cycle (cycle 2) is set to D42 or not. R-point height selection for smooth chamfering (point machining)",15,2],["D92","D92",null,"POINT bit settings (8 bits)",15,2],["D92","D92",0,"During a true-circle processing (end milling) cycle, E17 is used for axial feed or not.",15,2],["D92","D92",1,"The R1-point height of the back spot facing is set to D1 or not.",15,2],["D92","D92",2,"If a chamfering cutter is included in the premachining tool sequence of the same unit, the R-point height of the reamer is set to D1 or not.",15,2],["D92","D92",3,"If a chamfering cutter is included in the pre-machining tool sequence of the same unit, the R-point height of the tapping is set to D1 or not.",15,2],["D92","D92",4,"The position cleared radially or axially by D17 from the workpiece section concerned is subjected/not subjected to check for interference",15,2],["D92","D92",5,"Dwell time designation for synchronous tapping in a MAZATROL program valid/invalid",15,2],["D92","D92",6,"During planetary tapping, chips are ejected/not ejected automatically prior to the threading process.",15,2],["D92","D92",7,"Whether or not to generate alarm 650 CHAMFERING IMPOSSIBLE if idle cutting takes place during chamfering in point-machining unit",15,2],["D93","D93",null,"Unidirectional positioning for point-machining",15,2],["D94","D94",null,"Unidirectional positioning for point-machining",15,2],["D95","D95",null,"Auto-setting method for tapping",15,2],["D96","D96",null,"POINT bit settings (8 bits)",15,2],["D96","D96",0,"Surface speed calculation for spot drill used",15,2],["D96","D96",1,"Element that determines the counterboring pattern",15,2],["D96","D96",2,"Setting of the amount of chamfer in the spot drill tool sequence",15,2],["D96","D96",3,"Menu display setting of RGH BCB (inversed faced hole machining), BK-CBORE (back boring) and CBOR-TAP (counterbore tapping), as well as BACKSPOT FACER (inversed spot-facing tool) and BACK BORING BAR (back boring) in the tool sequence data",15,2],["D96","D96",4,"Conditions to determine the CIRC MIL operation for the specification without Y-axis",15,2],["D96","D96",5,"Setting of the start point Y of the cylindrical surface in the C-axis point machining unit",15,2],["D96","D96",6,"Smooth chamfering (C-POINT MACH-ING): Switching of the restrictions according to the cutting edge angle of a chamfering tool",15,2],["D96","D96",7,"Cutting depth in deep-hole tapping/high-speed deep-hole tapping cycle",15,2],["D97","D97",null,"POINT bit settings (1 bit)",15,2],["D97","D97",0,"Cutting drawing method for circular milling unit on the VIRTUAL MACHINING display",15,2],["D98","D98",null,"POINT bit settings (2 bits)",15,2],["D98","D98",0,"Action to be taken when the number of times pecking has been performed has reached the set maximum count",15,2],["D98","D98",1,"Execution of the INDEX unit when the PRI.No. is set in the MANUAL PROGRAM",15,2],["D100","D100",null,"POINT bit settings (1 bit)",15,2],["D100","D100",0,"fixed value",15,2],["D105","D105",null,"POINT bit settings (2 bits)",15,2],["D105","D105",0,"Handling the X-axial coordinates of non-turning TPC relay points",15,2],["D105","D105",1,"Tap high-speed deep-hole cycle menu display/hidden",15,2],["D106","D106",null,"POINT bit settings (8 bits)",15,2],["D106","D106",0,"Machine operation when machining units are not preceded by an indexing unit",15,2],["D106","D106",1,"Execution of an index command after the second or subsequent work coordinate command in WPC unit",15,2],["D106","D106",2,"T-code output during indexing before the end unit",15,2],["D106","D106",3,"Initial point position in the case where R-point is located outside the clearance around the workpiece at an arbitrary B-axis angle",15,2],["D106","D106",4,"Selection of rotational axis command system by table selection",15,2],["D106","D106",5,"Alarm output timing when the first machining unit is not preceded by an index unit",15,2],["D106","D106",6,"X-axis wear offset direction in the Z offset type milling back face [XY] mode",15,2],["D106","D106",7,"Selection of the C-axis positioning execution for the workpiece measurement in the WPC workpiece or initial-point scheme",15,2],["D107","D107",null,"POINT bit settings (4 bits)",15,2],["D107","D107",1,"Fixed value",15,2],["D107","D107",2,"Alarm output when 3D coordinate conversion mode cancel is specified in the manual program unit",15,2],["D107","D107",3,"Unit of feed rate for the feed per minute command in manual program units for the inch system",15,2],["D107","D107",4,"Calculation method for mill spindle speed when spot chamfering",15,2],["D130","D130",null,"Chip ejection distance in deep-hole drilling cycle",15,2],["D131","D131",null,"G00 feed-in speed override for deep-hole boring cycle",15,2],["D141","D141",null,"POINT bit settings (3 bits)",15,2],["D141","D141",0,"Chip ejection operation during deep-hole drilling cycle",15,2],["D141","D141",1,"Feed-in operation selection for deep-hole boring cycle",15,2],["D141","D141",2,"Circular milling unit: Circular processing selection method switch",15,2],["D143","D143",null,"POINT bit settings (1 bit)",15,2],["D143","D143",0,"WPC unit/WPC shift unit",15,2],["I1","I1",null,"Shift amount of unidirectional positioning (G60)",16,2],["I2","I2",null,"Upper (plus direction) user soft-limit",16,2],["I3","I3",null,"Lower (minus direction) user soft-limit",16,2],["I5","I5",null,"Function for making the G0 speed variable, Variable override: Minimum value",16,2],["I7","I7",null,"Function for making the G0 speed variable, Variable control area (lower limit side)",16,2],["I8","I8",null,"Function for making the G0 speed variable, Variable control area (upper limit side)",16,2],["I9","I9",null,"Function for making the G0 speed variable, Variable control area lower limit",16,2],["I10","I10",null,"Function for making the G0 speed variable, Variable control area upper limit",16,2],["I11","I11",null,"Rotary center of a workpiece",16,2],["I12","I12",null,"Clamping value for the amount of handle interruption",16,2],["I13","I13",null,"SOFT LIMIT bit settings (4 bits)",16,2],["I13","I13",0,"Execution of G28 (reference-point return)",16,2],["I13","I13",1,"Manual zero-point return operation",16,2],["I13","I13",2,"Axis display when a control axis is removed",16,2],["I13","I13",6,"Removal of control axes, valid/invalid",16,2],["I14","I14",null,"SOFT LIMIT bit settings (8 bits)",16,2],["I14","I14",0,"Mirror image with respect to the machine zero point, valid/invalid",16,2],["I14","I14",2,"User software limits (I2, I3) valid/invalid",16,2],["I14","I14",3,"Tool-tip relief after spindle orientation during execution of G75, G76, G86 or point-machining (boring or back-boring), valid/invalid",16,2],["I14","I14",4,"Direction of tool-tip relief after spindle orientation during execution of G75, G76, G86 or point-machining (boring or back-boring)",16,2],["I17","I17",null,"Amount of work hand rotational error correction (Work hand angle: 0°)",16,2],["I18","I18",null,"Amount of work hand rotational error correction (Work hand angle: 45°)",16,2],["I19","I19",null,"Amount of work hand rotational error correction (Work hand angle: 90°)",16,2],["I21","I21",null,"Fixed point 1 specified by the user",16,2],["SD49","SD49",null,"Machine coordinate selection",17,2],["SD50","SD50",null,"Table type",17,2],["SD51","SD51",null,"Round table axis direction",17,2],["SD53","SD53",null,"Smoothness selection for arcs in the tool path check/shape check",17,2],["SD58","SD58",null,"QUICK MAZATROL product shape display accuracy",17,2],["SD59-SD63","SD59-SD63",null,"Fixed value",17,2],["SD97","SD97",null,"Distance of the model movement per time",17,2],["SD98","SD98",null,"Amount of model rotation per time",17,2],["SD125","SD125",null,"Minimum table dimension X",17,2],["SD125-SD130","SD125-SD130",null,"Table size SD125: Minimum table dimension X SD126: Maximum table dimension X SD127: Minimum table dimension Y SD128: Maximum table dimension Y SD129: Minimum table dimension Z SD130: Maximum table dimension Z",17,2],["SD126","SD126",null,"Maximum table dimension X",17,2],["SD127","SD127",null,"Minimum table dimension Y",17,2],["SD128","SD128",null,"Maximum table dimension Y",17,2],["SD129","SD129",null,"Minimum table dimension Z",17,2],["SD130","SD130",null,"Maximum table dimension Z",17,2],["SD131","SD131",null,"Amount of table chamfer",17,2],["SD159","SD159",null,"SOLID bit settings (1 bit)",17,2],["SD159","SD159",0,"4-point clamp angle holder for assembly tools enable/disable",17,2],["SD165","SD165",null,"SOLID bit settings (1 bit)",17,2],["SD165","SD165",1,"Tool data setting using QUICK MAZATROL",17,2],["SD166","SD166",null,"SOLID bit settings (1 bit)",17,2],["SD166","SD166",0,"Registration of rotary tool holder model data for turning tools",17,2],["SD167","SD167",null,"SOLID bit settings (2 bits)",17,2],["SD167","SD167",0,"Display method for the jaws set on the 3D SETUP display in the turning mode",17,2],["SD167","SD167",1,"Sampling data automatic save function on occurrence of an INTELLIGENT SAFETY SHIELD (ISS) alarm",17,2],["SU1","SU1",null,"Axis setting I for plane selection",18,2],["SU2","SU2",null,"Axis setting I for plane selection",18,2],["SU3","SU3",null,"Axis setting I for plane selection",18,2],["SU4","SU4",null,"Axis setting J for plane selection",18,2],["SU5","SU5",null,"Axis setting J for plane selection",18,2],["SU6","SU6",null,"Axis setting J for plane selection",18,2],["SU7","SU7",null,"Axis setting K for plane selection",18,2],["SU8","SU8",null,"Axis setting K for plane selection",18,2],["SU9","SU9",null,"Axis setting K for plane selection",18,2],["SU10","SU10",null,"Selection of tool change command output position",18,2],["SU11","SU11",null,"Movement of axes during approach",18,2],["SU12","SU12",null,"Rotating position specified in the indexing unit after tool change",18,2],["SU13","SU13",null,"Axis name of the transfer axis",18,2],["SU14","SU14",null,"Tool nose mark display color on the TOOL PATH CHECK display/TRACE display",18,2],["SU15","SU15",null,"Name of thrust axis for servo axis",18,2],["SU16","SU16",null,"Movement to C-axis index swivel position when Z-offset scheme is used",18,2],["SU17","SU17",null,"Background color for the MDI window",18,2],["SU18","SU18",null,"Character color for the MDI window",18,2],["SU19","SU19",null,"Selecting the method of axis movement to the tool change command output position or to the position designated at RETURN of the end unit",18,2],["SU20","SU20",null,"Coefficient for polygonal machining spindle acceleration",18,2],["SU21","SU21",null,"Selection of returning operation after the execution of the workpiece transfer unit corresponding to the work hand angle to be changed",18,2],["SU22","SU22",null,"Method of axis movement from the initial point or the escape TPC relay point to the rotating position in the indexing unit",18,2],["SU23","SU23",null,"Cutting feed rate reduction rate in composite-type fixed cycle",18,2],["SU24","SU24",null,"Spindle speed multiplication factor in the execution of a composite-type fixed cycle",18,2],["SU26","SU26",null,"Chopping axis selection",18,2],["SU29","SU29",null,"Specification of an axis (linear axis) on a plane during polar coordinate interpolation",18,2],["SU30","SU30",null,"Specification of an axis (rotary axis) on a plane during polar coordinate interpolation",18,2],["SU31","SU31",null,"Axis movement pattern to the return position set in the end unit of initial-point scheme program for multi-tasking machine",18,2],["SU49","SU49",null,"Delay timer for the parts catcher",18,2],["SU50","SU50",null,"Tool turning clearance (radial value) in X-axis",18,2],["SU51","SU51",null,"Tool turning clearance in Z-axis",18,2],["SU52","SU52",null,"Lower-turret retraction function - Tool number of the retraction tool 1",18,2],["SU53","SU53",null,"Lower-turret retraction function - Tool number of the retraction tool 2",18,2],["SU54","SU54",null,"Allowable limit of axis movement completion waiting time when a cross machining command is executed",18,2],["SU55","SU55",null,"Wait time for accessing the programs in the hard disk operation area/Ethernet operation area",18,2],["SU56","SU56",null,"For setting SPRINT interface (option), fixed value",18,2],["SU97","SU97",null,"- Lower-turret retraction function - Fixed point of the retraction position",18,2],["SU97-SU100","SU97-SU100",null,"Lower-turret retraction function Fixed point of the retraction position",18,2],["SU102","SU102",null,"Return distance at wall during rough cutting in bar machining or in corner machining of EIA/ISO program",18,2],["SU103","SU103",null,"Cutting depth in the composite-type fixed cycle",18,2],["SU104","SU104",null,"Pecking return distance in grooving of EIA/ISO program",18,2],["SU105","SU105",null,"Cut depth (diametral value) for final cut in composite-type thread cutting cycle of EIA/ISO program",18,2],["SU106","SU106",null,"Minimum cut depth clamping value (radial value) in composite-type thread cutting cycle G276 of EIA/ISO program",18,2],["SU107","SU107",null,"Safety clamp speed",18,2],["SU108","SU108",null,"Safeguarding strength",18,2],["SU109","SU109",null,"Tip mass",18,2],["SU110","SU110",null,"- Tool length setting range check function - settable data range",18,2],["SU110-SU113","SU110-SU113",null,"Tool length setting range check function Settable data range SU110 Max. tool length (+X-axis) SU111 Min. tool length (–X-axis) SU112 Max. tool length (+Z-axis) SU113 Min. tool length (–Z-axis)",18,2],["SU113","SU113",null,"",18,2],["SU122","SU122",null,"Lower turret width setting for barrier expansion by the difference in X-axis angle between the upper and lower turrets",18,2],["SU123","SU123",null,"Admissible motion range on the primary rotational axis for workpiece placement error correction",18,2],["SU124","SU124",null,"Admissible motion range on the secondary rotational axis for workpiece placement error correction",18,2],["SU125","SU125",null,"Fixed value",18,2],["SU126","SU126",null,"Amount of offset for runout of the B-axis center (BA61) (only for Maza-Check)",18,2],["SU127","SU127",null,"Amount of offset for B-axis - spindle nose distance offset (BA62)",18,2],["SU128","SU128",null,"Retraction position of the upper and lower turrets at the end of the two-workpiece machining sequence (X-axis)",18,2],["SU129","SU129",null,"Retraction position of the upper and lower turrets at the end of the two-workpiece machining sequence (Z-axis)",18,2],["SU130","SU130",null,"Chopping reference point",18,2],["SU131","SU131",null,"Chopping top dead point",18,2],["SU132","SU132",null,"Chopping bottom dead point",18,2],["SU133","SU133",null,"Chopping speed",18,2],["SU134","SU134",null,"Chopping clamp speed",18,2],["SU135","SU135",null,"Acceleration/deceleration time constant during chopping",18,2],["SU136","SU136",null,"Chopping compensation coefficient",18,2],["SU137","SU137",null,"Chopping tolerance",18,2],["SU153","SU153",null,"SYSTEM bit settings (8 bits)",18,2],["SU153","SU153",0,"M-code selection for tapping cycle",18,2],["SU153","SU153",1,"Display of BUFFER on the POSITION display",18,2],["SU153","SU153",2,"Display of REMAIN on the POSITION display",18,2],["SU153","SU153",3,"Display of POSITION on the POSITION display",18,2],["SU153","SU153",4,"Automatic retraction of the lower turret for MAZATROL programs",18,2],["SU153","SU153",5,"“C-axis Clamp” machining method for MAZATROL programs (line/linear machining for the C-axis CYLIND mode)",18,2],["SU153","SU153",6,"MAZATROL point machining with C-axis clamped (M210)",18,2],["SU153","SU153",7,"“C-axis Clamp” machining method for MAZATROL programs (line/linear machining for the C-axis FACE mode)",18,2],["SU154","SU154",null,"SYSTEM bit settings (8 bits)",18,2],["SU154","SU154",0,"Displaying tool-setting values for ATC-type turret",18,2],["SU154","SU154",1,"Tool length setting range check function",18,2],["SU154","SU154",2,"Displaying the “next distance” during execution of G18.2/G18.3/G18.4",18,2],["SU154","SU154",3,"Displaying the “remaining distance” during execution of G18.2/G18.3/G18.4",18,2],["SU154","SU154",4,"Displaying the “current position” during execution of G18.2/G18.3/G18.4",18,2],["SU154","SU154",5,"Display of BUFFER during G17.1 - G17.5 mode",18,2],["SU154","SU154",6,"Display of REMAIN during G17.1 - G17.5 mode",18,2],["SU154","SU154",7,"Display of POSITION during G17.1 - G17.5 mode",18,2],["SU155","SU155",null,"SYSTEM bit settings (6 bits)",18,2],["SU155","SU155",1,"Correction timing of the touch sensor tool length during EIA/ISO programmed or MDI operation (for machining center specifications only)",18,2],["SU155","SU155",2,"Operation at an EIA subprogram call from a MAZATROL program",18,2],["SU155","SU155",3,"Judgment method for tool change command output during MAZATROL programmed operation",18,2],["SU155","SU155",4,"Tool change command output at the start of MAZATROL programmed operation",18,2],["SU155","SU155",7,"Reference value for judging tool breakage during laser tool measurement",18,2],["SU156","SU156",null,"SYSTEM bit settings (5 bits)",18,2],["SU156","SU156",3,"Tool command scheme for each turret",18,2],["SU156","SU156",4,"Type of deep-hole drilling cycle G83/G87",18,2],["SU156","SU156",5,"Fixed value (0)",18,2],["SU156","SU156",6,"Execution of the restarting search for a block in the mode of G68 when tool length compensation (G43/G44) remains valid with a turning tool mounted",18,2],["SU156","SU156",7,"Execution of the restarting search for a block after the cancellation of the cross command",18,2],["SU157","SU157",null,"SYSTEM bit settings (7 bits)",18,2],["SU157","SU157",1,"The scheme of axis movement during an approach and during movement to the tool change command output position for machining at the work hand side",18,2],["SU157","SU157",2,"Conditions for returning to the tool change command output position in the manual program unit (MANL PRG)",18,2],["SU157","SU157",3,"Movement to the tool rotating position for tool change command for the same TNo.",18,2],["SU157","SU157",4,"Operation to be performed if either TURN POS X, Y, or Z of the indexing unit is left blank.",18,2],["SU157","SU157",5,"Preparatory C-axis positioning to 0° for a manual program unit (MANL PRG) with a milling tool after a turning unit",18,2],["SU157","SU157",6,"Selection of Y-axis movement to the zero point when a turning tool is mounted",18,2],["SU157","SU157",7,"Selection of whether or not the B-axis rotation radius is to be included into the “clearance position” for changing the indexed cutting edge on one and the same FLASH tool",18,2],["SU158","SU158",null,"SYSTEM bit settings (7 bits)",18,2],["SU158","SU158",0,"Tool change position during TOOL EYE measurement",18,2],["SU158","SU158",1,"Conditions for wear compensation of turning tools in manual program unit",18,2],["SU158","SU158",2,"Checking the rotational axes’ correction values in workpiece placement error correction for MAZATROL programs",18,2],["SU158","SU158",3,"Handling of G43P0 tool length compensation with a touch sensor",18,2],["SU158","SU158",4,"Fixed value (0)",18,2],["SU158","SU158",5,"Returning operation from the chopping reference point",18,2],["SU158","SU158",7,"Manual tool measurement tool wear offset clear function",18,2],["SU159","SU159",null,"SYSTEM bit settings (1 bit)",18,2],["SU159","SU159",1,"Selection of whether or not to consider the tool length for tip position memory on the WORK OFFSET display",18,2],["SU161","SU161",null,"SYSTEM bit settings (1 bit)",18,2],["SU161","SU161",0,"Buffer block limit for tool diameter compensation/tool nose radius offset in manual program units",18,2],["TC1","TC1",null,"Cut depth reduction rate for rough cutting in bar machining unit, corner machining unit, and copy machining unit",19,2],["TC2","TC2",null,"Acceleration rate in up-going taper for rough cutting in bar machining unit",19,2],["TC3","TC3",null,"Acceleration rate in up-going wall slope (90°) for rough cutting in bar machining unit",19,2],["TC4","TC4",null,"Selection of chamfering pattern in rough external turning cycle G71 (G271) or rough edge-machining cycle G72 (G272)",19,2],["TC5","TC5",null,"Deceleration rate in down-going taper for rough cutting in bar machining unit",19,2],["TC6","TC6",null,"Deceleration rate in down-going wall slope (90°) for rough cutting in bar machining unit",19,2],["TC7","TC7",null,"Acceleration rate on outside stock contour for rough cutting in copy machining unit",19,2],["TC8","TC8",null,"Acceleration pitch error ratio in thread cutting unit",19,2],["TC9","TC9",null,"Rough cutting residue ratio in cutting off cycle in groove cutting unit",19,2],["TC10","TC10",null,"Cut depth allowable incremental rate for rough cutting in groove cutting unit, edge machining unit and copy machining unit",19,2],["TC11","TC11",null,"Deceleration rate at cutting start in turning-drilling unit",19,2],["TC12","TC12",null,"Deceleration rate at cutting end in turning-drilling unit",19,2],["TC13","TC13",null,"Deceleration rate at rough cutting start in bar machining unit and copy machining unit",19,2],["TC14","TC14",null,"Maximum permissible rate of increase of the initial cutting depth during roughing",19,2],["TC15","TC15",null,"Deceleration clearance at start of rough cutting in bar machining unit and copy machining unit",19,2],["TC16","TC16",null,"Tolerance for escape in high speed rough cutting cycle of bar machining unit",19,2],["TC17","TC17",null,"Pitch error correction during threading acceleration",19,2],["TC18","TC18",null,"Fixed value (0)",19,2],["TC19","TC19",null,"Turning-drilling cut depth calculation coefficient",19,2],["TC20","TC20",null,"Reamer return speed calculation coefficient in the turning-drilling unit",19,2],["TC21","TC21",null,"Incomplete threading portion length calculation coefficient for turning-tap tip",19,2],["TC22","TC22",null,"Turning-tapper elongation calculation coefficient",19,2],["TC23","TC23",null,"Thread height calculation coefficient for outside diameter, face/rear thread cutting (metric)",19,2],["TC24","TC24",null,"Thread height calculation coefficient for inside diameter thread cutting (metric)",19,2],["TC25","TC25",null,"Thread height calculation coefficient for outside diameter, face/rear thread cutting (inch)",19,2],["TC26","TC26",null,"Thread height calculation coefficient for inside diameter thread cutting (inch)",19,2],["TC27","TC27",null,"Recessing width for #1 to #3",19,2],["TC28","TC28",null,"Recessing depth #1 to #3",19,2],["TC29","TC29",null,"Recessing width for #4",19,2],["TC30","TC30",null,"Recessing depth for #4",19,2],["TC31","TC31",null,"Recessing width for #5",19,2],["TC32","TC32",null,"Recessing depth for #5",19,2],["TC33","TC33",null,"Recessing width for #6",19,2],["TC34","TC34",null,"Recessing depth for #6",19,2],["TC35","TC35",null,"Lower limit for thrust ratio",19,2],["TC37","TC37",null,"Safety contour clearance — Outside diameter clearance (radial value)",19,2],["TC38","TC38",null,"Safety contour clearance — Inside diameter clearance (radial value)",19,2],["TC39","TC39",null,"Safety contour clearance — Front clearance",19,2],["TC40","TC40",null,"Safety contour clearance — Back clearance",19,2],["TC41","TC41",null,"Thread cutting clearance (radial value)",19,2],["TC42","TC42",null,"Groove cutting clearance (radial value) in X-axis",19,2],["TC43","TC43",null,"Groove cutting clearance in Z-axis",19,2],["TC44","TC44",null,"Workpiece transfer clearance",19,2],["TC45","TC45",null,"Amount of the edge clearance after edge-machining",19,2],["TC46","TC46",null,"Drilling depth decrement in turning-drilling unit",19,2],["TC47","TC47",null,"Pecking return distance in turning-drilling unit",19,2],["TC48","TC48",null,"Drilling cut depth clamp value in turning-drilling unit",19,2],["TC49","TC49",null,"Spindle speed clamp value in cutting off cycle",19,2],["TC50","TC50",null,"Number of times that the feed rate is to be reduced during the #4 and #5 cutting-off cycles of a grooving unit",19,2],["TC51","TC51",null,"Dwell at the hole bottom during non-through hole drilling cycle of the turning-drilling unit",19,2],["TC52","TC52",null,"Dwell (specification of spindle rotation number) at groove bottom in groove cutting unit",19,2],["TC53","TC53",null,"Feed rate for escape by short distance",19,2],["TC54","TC54",null,"Cut depth per cycle for machining inside diameter in bar machining unit",19,2],["TC55","TC55",null,"Reverse feed tolerance for contour machining",19,2],["TC56","TC56",null,"Overtravelling in X-axis direction in edge machining unit",19,2],["TC57","TC57",null,"Workpiece pressing speed in workpiece transfer unit",19,2],["TC58","TC58",null,"Spindle speed of two spindles in workpiece transfer while the spindles are rotating in workpiece transfer unit",19,2],["TC59","TC59",null,"Workpiece pressing distance in workpiece transfer unit",19,2],["TC61","TC61",null,"Simultaneous operation pattern for transfer",19,2],["TC62","TC62",null,"Selection of tool change command output position for FLASH tool",19,2],["TC63","TC63",null,"Amount of relief after transfer using the workpiece transfer unit (Spindle mode 0 to 5)",19,2],["TC64","TC64",null,"Amount of relief after transfer using the workpiece transfer unit (Spindle mode 6 and 7)",19,2],["TC65","TC65",null,"Specification of first M-code for parts catcher control",19,2],["TC66","TC66",null,"Minimum index angle of the FLASH tool",19,2],["TC67","TC67",null,"Return distance (radial value) in X-axis at wall during rough cutting in bar cutting unit, in corner machining unit or in mill-turning unit of MAZATROL programs",19,2],["TC68","TC68",null,"Return distance in Z-axis at wall during rough cutting in bar cutting unit, in corner machining unit or in mill-turning unit of MAZATROL programs",19,2],["TC69","TC69",null,"Number of revolutions during dwell for pecking of grooving",19,2],["TC70","TC70",null,"FLASH tool — Number of cutting edges to be used for the tool not registered in the tool file",19,2],["TC71","TC71",null,"Feed stopping rotation dwell time during the chip cutting cycle",19,2],["TC72","TC72",null,"Number of times of roughing in the composite-type fixed cycle (G273, G73)",19,2],["TC73","TC73",null,"Return speed at pecking portion in groove cutting unit and turning-drilling unit",19,2],["TC74","TC74",null,"Pecking return distance in groove cutting unit of MAZATROL programs",19,2],["TC75","TC75",null,"Overlap distance for machining wide groove in groove cutting unit",19,2],["TC76","TC76",null,"Escape value after machining in edge machining unit",19,2],["TC77","TC77",null,"Acceleration distance clamp value for thread cutting unit",19,2],["TC78","TC78",null,"Cut depth (radial value) for final cut in thread cutting unit of MAZATROL programs",19,2],["TC79","TC79",null,"Minimum cut depth clamping value (radial value) in thread cutting unit of MAZATROL programs",19,2],["TC80","TC80",null,"Angle of the tool nose during the G276/G76 mode",19,2],["TC81","TC81",null,"Final finishing repeat times in the composite-type fixed cycle (G276, G76)",19,2],["TC82","TC82",null,"Chamfering data calculation coefficient in thread cutting unit and thread cutting cycle (G276/G292, G76/G92)",19,2],["TC83","TC83",null,"Number of cutting operations to be performed on finishing allowance corresponding to standard pattern (#0) of threading unit",19,2],["TC84","TC84",null,"Feed rate to be auto-set for finishing",19,2],["TC85-TC94","TC85-TC94",null,"Specification of the pocket for the long boring bar",19,2],["TC95","TC95",null,"Fixed value",19,2],["TC96","TC96",null,"Fixed value",19,2],["TC97","TC97",null,"Type of retraction during workpiece transfer",19,2],["TC98","TC98",null,"Returning operation after machining specified in the end unit",19,2],["TC99","TC99",null,"ATC operation after machining when not specified in the end unit",19,2],["TC101","TC101",null,"Selection of droop sampling axis",19,2],["TC102","TC102",null,"Selection of cycle counter sampling axis",19,2],["TC103","TC103",null,"Amplitude limit of table vibration",19,2],["TC104","TC104",null,"Clearance for rechucking using the workpiece transfer unit",19,2],["TC105","TC105",null,"Fixed value (0)",19,2],["TC106","TC106",null,"Designation of MOVE C in a workpiece transfer unit of a program of workpiece scheme (only for the INTEGREX e-H Series)",19,2],["TC107","TC107",null,"Overshoot in the longitudinal direction with the workpiece for inside machining",19,2],["TC108","TC108",null,"End position of the two-workpiece machining",19,2],["TC109","TC109",null,"Reference length for the display of bar materials on the BL SCHEDULE display",19,2],["TC111","TC111",null,"- CUTTING CONDITON LEARN display — Workpiece length range",19,2],["TC111-TC113","TC111-TC113",null,"CUTTING CONDITON LEARN display — Workpiece length range",19,2],["TC113","TC113",null,"",19,2],["TC114","TC114",null,"- CUTTING CONDITON LEARN display — Max. workpiece outside diameter range",19,2],["TC114-TC116","TC114-TC116",null,"CUTTING CONDITON LEARN display — Max. workpiece outside diameter range",19,2],["TC116","TC116",null,"",19,2],["TC117","TC117",null,"Composite-type fixed cycle — G273 amount of X-axial release",19,2],["TC118","TC118",null,"Composite-type fixed cycle — G273 amount of Z-axial release",19,2],["TC120","TC120",null,"- Distance to the front end of the long boring bar",19,2],["TC120-TC137","TC120-TC137",null,"Distance to the front end of the long boring bar Distance center Shift stroke Z Long boring bar",19,2],["TC137","TC137",null,"",19,2],["TC141","TC141",null,"Use/disuse of acceleration in up-going slope during rough cutting cycle in bar machining unit",19,2],["TC141","TC141",0,"Use/disuse of acceleration in up-going slope during rough cutting cycle in bar machining unit",19,2],["TC141","TC141",1,"Use/disuse of deceleration in down-going slope during rough cutting cycle in bar machining unit",19,2],["TC141","TC141",2,"Selection between use/disuse of acceleration distance check at start of thread cutting unit",19,2],["TC141","TC141",3,"Selection between start position shift/start angle shift for thread number offset in thread cutting unit",19,2],["TC141","TC141",5,"Selecting an angle margin for nose shape compensation",19,2],["TC141","TC141",6,"CHUCK JAW DATA display name/code selection",19,2],["TC141","TC141",7,"Whether to make the partition plate and the workpiece barrier valid",19,2],["TC142","TC142",null,"TURNING bit settings (8 bits)",19,2],["TC142","TC142",0,"Fixed value (0)",19,2],["TC142","TC142",1,"Selecting an inter-unit relief path when a succession of I.D. turning units using the same tool exist and there is no movement to the rotating position of the tool",19,2],["TC142","TC142",2,"Selection of the jaw data reference method",19,2],["TC142","TC142",3,"Using angle tool holder valid/invalid",19,2],["TC142","TC142",4,"Turning spindle stop M code output in end unit",19,2],["TC142","TC142",5,"Selection whether an alarm is to be issued if the ending position of workpiece pressing is reached during transfer of the workpiece",19,2],["TC142","TC142",6,"X-axis retraction position during workpiece transfer as specified in the workpiece transfer unit of the MAZATROL program",19,2],["TC142","TC142",7,"Upper turret retraction during machining with the lower turret (for MULTIPLEX series)",19,2],["TC143","TC143",null,"Whether the end tool of the long boring bar can be changed",19,2],["TC144","TC144",null,"TURNING bit settings (8 bits)",19,2],["TC144","TC144",0,"Automatic selection of the relief path for the continuous I.D. machining",19,2],["TC144","TC144",1,"Workpiece transfer axis motion for opposed turret specification lathes",19,2],["TC144","TC144",2,"C-axis clamping during workpiece transfer with C-axis positioning, valid/invalid",19,2],["TC144","TC144",3,"Automatic output of spindle rotation command when turning tool is used in the manual program unit",19,2],["TC144","TC144",4,"ATC and RETURN of the end unit after single-process operation",19,2],["TC144","TC144",5,"ATC and RETURN of the end unit for repetition (CONTI. = 1)",19,2],["TC144","TC144",6,"Relief path G00/G01 selection for edging",19,2],["TC144","TC144",7,"Handling when no tools are specified for the manual program unit",19,2],["TC145","TC145",null,"TURNING bit settings (7 bits)",19,2],["TC145","TC145",0,"OFFSET unit Z-axial inversion during turning",19,2],["TC145","TC145",1,"Handling of the G04 command in the manual program unit",19,2],["TC145","TC145",2,"Operation by cutting-feed override 0 in G31 command mode",19,2],["TC145","TC145",3,"Mode selection after C-axis transfer using the workpiece transfer unit",19,2],["TC145","TC145",4,"Selection of a calculation method for tail barrier end reference",19,2],["TC145","TC145",5,"Output of maximum spindle speed command specified in the common unit",19,2],["TC145","TC145",7,"Operation of the path inversed with respect to the traveling direction of the tip (only for copy machining)",19,2],["TC146","TC146",null,"TURNING bit settings (8 bits)",19,2],["TC146","TC146",0,"Selection of the turning spindle rotation timing when the relay point for the turning approach is specified",19,2],["TC146","TC146",1,"X-axis command in the manual program unit",19,2],["TC146","TC146",2,"Tool path when the infeed angle or the relief angle is 0° or less",19,2],["TC146","TC146",3,"C-axis command output for the second workpiece transfer unit onward when workpiece transfer units of a BAR moving pattern exist in succession",19,2],["TC146","TC146",4,"System enabled at MAZATROL program call from EIA/ISO program",19,2],["TC146","TC146",5,"Automatic setting of M8 as an M-code to be outputted at the beginning of a unit which is selected for the single-process operation",19,2],["TC146","TC146",6,"C-offset values to be used on HD1 and HD2 for a two-workpiece machining unit",19,2],["TC146","TC146",7,"Whether or not to modify the numeric positional indication with respect to the workpiece coordinate system according to the tool offset setting in the TPC data",19,2],["TC147","TC147",null,"TURNING bit settings (7 bits)",19,2],["TC147","TC147",0,"Modal condition about diameter/radius value input for the unit succeeding a manual program or subprogram unit",19,2],["TC147","TC147",1,"Z/C offset value to be used in the EIA/ISO subprogram after workpiece transfer in the MAZATROL program",19,2],["TC147","TC147",3,"Tool change position at RETURN in end unit when FLASH tool is mounted",19,2],["TC147","TC147",4,"Whether pressing is to be made selectable for workpiece transfer units of a BAR moving pattern",19,2],["TC147","TC147",5,"Tool nose position of an inside-turning grooving tool for machining on the back side",19,2],["TC147","TC147",6,"Handling of nose R in the retraction path during grooving #4, 5 (cutting off)",19,2],["TC147","TC147",7,"Z-axial withdrawal after M-code unit execution",19,2],["TC148","TC148",null,"TURNING bit settings (4 bits)",19,2],["TC148","TC148",4,"Selection of compensation cancel when working around the workpiece",19,2],["TC148","TC148",5,"Selection of movement from the clearance area to a clearance point during O.D. turning",19,2],["TC148","TC148",6,"Selection of movement from the clearance area to a clearance point during face/rear turning",19,2],["TC148","TC148",7,"W-axis command enabled/disabled during two-workpiece machining",19,2],["TC149","TC149",null,"TURNING bit settings (5 bits)",19,2],["TC149","TC149",0,"Selection of the zone where spindle override is fixed to 100% during thread cutting cycle",19,2],["TC149","TC149",1,"Cutting edge offset when a milling drill rotates at the same time in turning-drilling unit (blind hole)",19,2],["TC149","TC149",4,"Spindle rotation during turning when an S-code is specified in TPC data",19,2],["TC149","TC149",5,"Machine operation on tool path check of a program for which workpiece scheme is selected and T. CENTER is specified for X and Y, but Z is left blank in the basic coordinates system unit (WPC)",19,2],["TC149","TC149",7,"Alarm output when the directions of rotation of the turning tool of the manual program unit and the spindle do not match",19,2],["TC150","TC150",null,"TURNING bit settings (4 bits)",19,2],["TC150","TC150",0,"Setting of the thrust when moving a workpiece",19,2],["TC150","TC150",1,"Pinch cut/Y-axis turning in MAZATROL program",19,2],["TC150","TC150",2,"Alarm stop if a program that performs 2 workpiece machining with only one spindle is executed",19,2],["TC150","TC150",5,"Selection of surface speed to be output to the screen during constant surface speed control",19,2],["TC151","TC151",null,"TURNING bit settings (1 bit)",19,2],["TC151","TC151",0,"Approach method for ID cutting",19,2],["TC155","TC155",null,"Cut depth per cycle for machining external diameter in bar machining unit",19,2],["TC156","TC156",null,"Tool load avoidance distance in reciprocating grooving operation (side wall)",19,2],["TC157","TC157",null,"INTELLIGENT BALANCE ANALYZER function (IBA): Angular offset",19,2],["TC158","TC158",null,"Feed rate override in reciprocating grooving operation",19,2],["TC159","TC159",null,"Tool load avoidance distance in reciprocating grooving operation (bottom)",19,2],["TC160","TC160",null,"- Retraction distance from wall in reciprocating grooving operation",19,2],["TC161","TC161",null,"Tool load avoidance distance in reciprocating grooving operation (bottom)",19,2],["TC162","TC162",null,"Wall clearance in uni-directional grooving",19,2],["TC251","TC251",null,"INTELLIGENT BALANCE ANALYZER function (IBA): Imbalance multiplication parameter",19,2],["TC252","TC252",null,"INTELLIGENT BALANCE ANALYZER function (IBA): Imbalance factor parameter",19,2],["TC253","TC253",null,"INTELLIGENT BALANCE ANALYZER function (IBA): Imbalance droop offset",19,2],["TC254","TC254",null,"INTELLIGENT BALANCE ANALYZER function (IBA): Imbalance rotary speed offset",19,2],["TC255","TC255",null,"Intelligent Balance Analyzer function (IBA): Imbalance slope parameter",19,2],["TC289","TC289",null,"TURNING bit settings (1 bit)",19,2],["TC289","TC289",0,"Considering C1 and C2 values in the workpiece travel unit in an FRM workpiece scheme program in the tool path check, trace shapes and QUICK shapes",19,2],["TC290","TC290",null,"TURNING bit settings (2 bits)",19,2],["TC290","TC290",0,"Thread cutting pattern",19,2],["TC290","TC290",1,"Cutting start position selection for reciprocating/uni-directional grooving",19,2],["BAUDRATE","BAUDRATE",null,"Baud rate for RS-232C interface",20,0],["SAME-WNo","SAME WNo.",null,"Type of processing to be executed if the machining program of an existing work number is to be loaded",20,0],["PORT","PORT",null,"CMT port selection",20,0],["CMT1-CMT32","CMT1-CMT32",null,"Invalid",20,0]],"m":[["M00","Program Stop"],["M01","Optional Stop"],["M02","End of Program"],["M03","Start of Forward Milling Spindle Rotation"],["M04","Start of Backward Milling Spindle Rotation"],["M05","Stop of Milling Spindle Rotation"],["M06","Tool Change"],["M07","Not used on this machine",1],["M08","Flood Coolant ON"],["M09","All Coolants OFF"],["M10","Mill spindle tool clamp"],["M11","Mill spindle tool unclamp"],["M15","ATC Cover Close"],["M16","ATC Cover Open"],["M17","Not used on this machine",1],["M18","Not used on this machine",1],["M19","Milling Spindle Orientation"],["M24","Error Detect OFF"],["M30","Reset and Rewind"],["M33","Laser Tool Length Measuring Mode ON (Option)"],["M34","Laser Tool Length Measuring Mode OFF (Option)"],["M35","Not used on this machine",1],["M38","Not used on this machine",1],["M39","Not used on this machine",1],["M42","Not used on this machine",1],["M46","Not used on this machine",1],["M47","Not used on this machine",1],["M48","Cancellation of M49"],["M49","Override Cancel"],["M50","Not used on this machine",1],["M51","Milling Spindle-Through Coolant ON"],["M52","Not used on this machine",1],["M58","Tool Life Check"],["M68","Not used on this machine",1],["M69","Not used on this machine",1],["M71","Not used on this machine",1],["M72","Not used on this machine",1],["M73","Not used on this machine",1],["M74","Not used on this machine",1],["M75","Not used on this machine",1],["M76","Not used on this machine",1],["M90","Not used on this machine",1],["M91","Not used on this machine",1],["M92","Not used on this machine",1],["M93","Not used on this machine",1],["M98","Subprogram Call"],["M99","Return to Main Program"],["M101","High-pressure Coolant Pressure Selection 2 (Option)"],["M102","High-pressure Coolant Pressure Selection 3 (Option)"],["M103","High-pressure Coolant Pressure Selection 4 (Option)"],["M104","High-pressure Coolant Pressure Selection 5 (Option)"],["M105","High-pressure Coolant Pressure Selection 6 (Option)"],["M106","High-pressure Coolant Pressure Selection 7 (Option)"],["M107","B-Axis Clamping"],["M108","B-Axis Unclamping"],["M110","Milling Spindle Clamping"],["M111","Milling Spindle Unclamping"],["M120","Automatic Power Cutoff"],["M122","Not used on this machine",1],["M123","Not used on this machine",1],["M129","Flood Air Blast ON (Option)"],["M130","Not used on this machine",1],["M131","High-pressure Through-mill-spindle Coolant ON"],["M132","Milling Spindle-Through Air ON"],["M134","Not used on this machine",1],["M137","Not used on this machine",1],["M138","Not used on this machine",1],["M139","Heavy Tool Mode Cancel"],["M140","Heavy Tool Mode ON"],["M149","Magazine Rotation"],["M155","Not used on this machine",1],["M160","Not used on this machine",1],["M163","Milling Spindle-Through Coolant OFF"],["M169","Cancellation of M170"],["M170","AFC Cancel"],["M173","Not used on this machine",1],["M174","Not used on this machine",1],["M180","Not used on this machine",1],["M181","Not used on this machine",1],["M187","Laser Tool Length Measuring Setup Confirmation (Option)"],["M195","Not used on this machine",1],["M196","Not used on this machine",1],["M197","Not used on this machine",1],["M198","Not used on this machine",1],["M199","Not used on this machine",1],["M200","Turning Spindle C-Axis Connect/Milling Mode Select"],["M202","Turning Spindle C-Axis Disconnect/Turning Mode Select"],["M203","Start of Forward Turning Spindle Rotation"],["M204","Start of Backward Turning Spindle Rotation"],["M205","Stop of Turning Spindle Rotation"],["M206","Turning Spindle Chuck Open"],["M207","Turning Spindle Chuck Close"],["M210","Turning Spindle C-Axis Clamping"],["M211","Turning Spindle C-Axis Braking"],["M212","Turning Spindle C-Axis Unclamping"],["M219","Turning Spindle Orientation"],["M231","Tailstock Forward"],["M232","Tailstock Backward"],["M234","Turning Spindle (No. 1) Chuck Clamp Pressure HIGH Select (Option)"],["M238","Putting the turning spindle gear shift mechanism into a low-speed position."],["M239","Putting the turning spindle gear shift mechanism into a high-speed position."],["M240","Putting the turning spindle gear shift mechanism into neutral."],["M241","Turning Spindle Motor High-Speed Coil Select"],["M243","Turning Spindle Motor Low-Speed Coil Select"],["M253","Chamfering OFF"],["M254","Chamfering ON"],["M256","Front Door (Top Door) Open (Option)"],["M258","Turning Spindle Air Blast ON (Option)"],["M259","Turning Spindle Air Blast OFF (Option)"],["M264","Turning Spindle Jaw Coolant ON (Option)"],["M265","Turning Spindle Jaw Coolant OFF (Option)"],["M266","Turning Spindle Shower Coolant ON (Option)"],["M267","Turning Spindle Shower Coolant OFF (Option)"],["M268","Turning Spindle-Through Coolant ON (Option)"],["M269","Turning Spindle-Through Coolant OFF (Option)"],["M270","Turning Spindle-Through Air Blast ON (Option)"],["M271","Turning Spindle-Through Air Blast OFF (Option)"],["M272","Turning Spindle (No. 1) Chuck, ID Chucking Selection"],["M273","Turning Spindle (No. 1) Chuck, OD Chucking Selection"],["M281","Touch probe ON (option)"],["M282","Touch probe OFF (option)"],["M283","Tool Measurement Start (Option)"],["M285","Work Rest 1 Coolant ON (Option)"],["M286","Work Rest 1 Coolant OFF (Option)"],["M287","Work Rest 2 Coolant ON (Option)"],["M288","Work Rest 2 Coolant OFF (Option)"],["M292","Work Rest 1 Unclamp (Option)"],["M293","Work Rest 1 Clamp (Option)"],["M294","Work Rest 2 Unclamp (Option)"],["M295","Work Rest 2 Clamp (Option)"],["M300","Turning Spindle No. 2 C-Axis Connect/Milling Mode Select"],["M302","Turning Spindle No. 2 C-Axis Disconnect/Turning Mode Select"],["M303","Start of Forward Turning Spindle No. 2 Rotation"],["M304","Start of Backward Turning Spindle No. 2 Rotation"],["M305","Stop of Turning Spindle No. 2 Rotation"],["M306","Turning Spindle No. 2 Chuck Open"],["M307","Turning Spindle No. 2 Chuck Close"],["M310","Turning Spindle No. 2 C-Axis Clamping"],["M311","Turning Spindle No. 2 C-Axis Braking"],["M312","Turning Spindle No. 2 C-Axis Unclamping"],["M333","Turning Spindle (No. 2) Chuck Clamp Pressure LOW Select (Option)"],["M334","Turning Spindle (No. 2) Chuck Clamp Pressure HIGH Select (Option)"],["M341","Turning Spindle No. 2 Motor High-Speed Coil Select"],["M343","Turning Spindle No. 2 Motor Low-Speed Coil Select"],["M358","Turning Spindle No. 2 Air Blast ON"],["M359","Turning Spindle No. 2 Air Blast OFF"],["M364","Turning Spindle No. 2 Jaw Coolant ON (Option)"],["M365","Turning Spindle No. 2 Jaw Air Coolant OFF (Option)"],["M366","Turning Spindle No. 2 Shower Coolant ON (Option)"],["M367","Turning Spindle No. 2 Shower Coolant OFF (Option)"],["M368","Turning Spindle No. 2 Spindle-Through Coolant ON (Option)"],["M369","Turning Spindle No. 2 Spindle-Through Coolant OFF (Option)"],["M370","Turning Spindle No. 2 Spindle-Through Air Blast ON (Option)"],["M371","Turning Spindle No. 2 Spindle-Through Air Blast OFF (Option)"],["M372","Turning Spindle (No. 2) Chuck, ID Chucking Selection"],["M373","Turning Spindle (No. 2) Chuck, OD Chucking Selection"],["M400","External M-Code Output 1 (Option)"],["M401","External M-Code Output 2 (Option)"],["M402","External M-Code Output 3 (Option)"],["M403","External M-Code Output 4 (Option)"],["M404","External M-Code Output 5 (Option)"],["M405","External M-Code Output 6 (Option)"],["M406","External M-Code Output 7 (Option)"],["M408","External M-Code Output 9 (Option)"],["M409","External M-Code Output 10 (Option)"],["M410","External M-Code Output 11 (Option)"],["M411","External M-Code Output 12 (Option)"],["M412","External M-Code Output 13 (Option)"],["M413","External M-Code Output 14 (Option)"],["M414","External M-Code Output 15 (Option)"],["M415","External M-Code Output 16 (Option)"],["M416","External M-Code Output 17 (Option)"],["M417","External M-Code Output 18 (Option)"],["M418","External M-Code Output 19 (Option)"],["M419","External M-Code Output 20 (Option)"],["M540","TRANSFER mode ON (only for INTEGREX e-670H-S)"],["M541","TRANSFER mode OFF (only for INTEGREX e-670H-S)"],["M542","TRANSFER BAR mode ON (only for INTEGREX e-670H-S)"],["M543","TRANSFER BAR mode OFF (only for INTEGREX e-670H-S)"],["M557","High-pressure Coolant Pressure Setting Cancel (Option)"],["M610","Grinder Mode ON (Option)"],["M611","Grinder Milling Spindle Speed Set (Option)"],["M612","Grinder Mode OFF (Option)"],["M613","Mist Collector ON (Option)"],["M614","Mist Collector OFF (Option)"],["M673","Long Boring Bar Coolant OFF"],["M674","Long Boring Bar Air Blow ON"],["M675","Long Boring Bar Air Blow OFF"],["M831","Tailstock Thrust Setup"],["M841","Tailstock Movement to “Position 1”"],["M842","Tailstock Movement to “Position 2”"],["M843","Tailstock Movement to “Reverse Position”"],["M844","Tailstock Interlock Cancel"],["M845","Cancellation of M844"],["M998","Program Chain (WNo. Search  Cycle Start)"],["M999","Program Chain (WNo. Search Only)"]],"g":[["G00","Positioning"],["G01","Linear interpolation"],["G01.1","Threading with C-axis interpolation"],["G02","Circular interpolation (CW)"],["G02.1","Spiral interpolation (CW)"],["G03","Circular interpolation (CCW)"],["G03.1","Spiral interpolation (CCW)"],["G04","Dwell"],["G05","High-speed machining mode"],["G06.1","Fine spline interpolation"],["G06.2","NURBS interpolation"],["G07","Virtual-axis interpolation"],["G07.1","Cylindrical interpolation"],["G09","Exact-stop"],["G10","Data setting mode ON"],["G10.1","Command address OFF"],["G10.9","Selection between diameter and radius data input"],["G11","Data setting mode OFF"],["G12.1","Polar coordinate interpolation ON"],["G13.1","Polar coordinate interpolation OFF"],["G15","Polar coordinate input OFF"],["G16","Polar coordinate input ON"],["G17","XY-plane selection"],["G18","ZX-plane selection"],["G19","YZ-plane selection"],["G20","Inch data input"],["G21","Metric data input"],["G22","Pre-move stroke check ON"],["G23","Pre-move stroke check OFF"],["G27","Reference point check"],["G28","Reference point return"],["G29","Return from reference point"],["G30","Return to 2nd, 3rd and 4th reference points"],["G31","Skip function"],["G31.1","Multi-step skip 1"],["G31.2","Multi-step skip 2"],["G31.3","Multi-step skip 3"],["G32","Thread cutting (straight, taper)"],["G33","Thread cutting (straight, taper)"],["G34","Variable lead thread cutting"],["G34.1","Hole machining pattern cycle (on a circle)"],["G35","Hole machining pattern cycle (on a line)"],["G36","Hole machining pattern cycle (on an arc)"],["G37","Automatic tool length measurement"],["G37.1","Hole machining pattern cycle (on a grid)"],["G38","Vector selection for tool radius compensation"],["G39","Corner arc for tool radius compensation"],["G40","Nose radius/Tool radius compensation OFF"],["G41","Nose radius/Tool radius compensation (left)"],["G41.2","Tool radius compensation for five-axis machining (left)"],["G41.5","Tool radius compensation for five-axis machining (left)"],["G42","Nose radius/Tool radius compensation (right)"],["G42.2","Tool radius compensation for five-axis machining (right)"],["G42.5","Tool radius compensation for five-axis machining (right)"],["G43","Tool length offset (+)"],["G43.1","Tool length offset in tool-axis direction"],["G43.4","Tool tip point control (Type 1) ON"],["G43.5","Tool tip point control (Type 2) ON"],["G43.8","Cutting point command (Type 1) ON"],["G43.9","Cutting point command (Type 2) ON"],["G44","Tool length offset (–)"],["G45","Tool position offset, extension"],["G46","Tool position offset, reduction"],["G47","Tool position offset, double extension"],["G48","Tool position offset, double reduction"],["G49","Tool position offset OFF"],["G50","Scaling OFF"],["G50.1","Mirror image OFF"],["G50.2","Polygonal machining mode OFF"],["G51","Scaling ON"],["G51.1","Mirror image ON"],["G51.2","Polygonal machining mode ON"],["G52","Local coordinate system setting"],["G53","Selection of machine coordinate system"],["G53.1","Tool-axis direction control"],["G54","Selection of workpiece coordinate system 1"],["G54.1","Selection of additional workpiece coordinate systems"],["G54.2","Selection of fixture offset"],["G54.4","Workpiece setup error correction"],["G55","Selection of workpiece coordinate system 2"],["G56","Selection of workpiece coordinate system 3"],["G57","Selection of workpiece coordinate system 4"],["G58","Selection of workpiece coordinate system 5"],["G59","Selection of workpiece coordinate system 6"],["G60","One-way positioning"],["G61","Exact stop mode"],["G61.1","High-accuracy mode (Geometry compensation)"],["G61.2","Modal spline interpolation"],["G62","Automatic corner override"],["G63","Tapping mode"],["G64","Cutting mode"],["G65","Single user macro call"],["G66","Modal user macro call A"],["G66.1","Modal user macro call B"],["G67","Modal user macro call OFF"],["G68","Programmed coordinate rotation ON / 3-D coordinate conversion ON"],["G68.2","Inclined-plane machining ON"],["G68.3","Inclined-plane machining (by specifying tool-axis direction) ON"],["G68.4","Incremental coordinate system establishment for inclined-plane machining"],["G69","Programmed coordinate rotation OFF / 3-D coordinate conversion OFF / Inclined-plane machining OFF"],["G71.1","Fixed cycle (Chamfering cutter 1, CW)"],["G72.1","Fixed cycle (Chamfering cutter 2, CCW)"],["G73","Fixed cycle (High-speed deep-hole drilling)"],["G74","Fixed cycle (Reverse tapping)"],["G75","Fixed cycle (Boring 1)"],["G76","Fixed cycle (Boring 2)"],["G77","Fixed cycle (Back spot facing)"],["G78","Fixed cycle (Boring 3)"],["G79","Fixed cycle (Boring 4)"],["G80","Fixed cycle OFF"],["G81","Fixed cycle (Spot drilling)"],["G82","Fixed cycle (Drilling)"],["G82.2","Fixed cycle (Pecking)"],["G83","Fixed cycle (Deep-hole drilling)"],["G84","Fixed cycle (Tapping)"],["G84.2","Fixed cycle (Synchronous tapping)"],["G84.3","Fixed cycle (Synchronous reverse tapping)"],["G85","Fixed cycle (Reaming)"],["G86","Fixed cycle (Boring 5)"],["G87","Fixed cycle (Back boring)"],["G88","Fixed cycle (Boring 6)"],["G89","Fixed cycle (Boring 7)"],["G90","Absolute data input"],["G91","Incremental data input"],["G92","Coordinate system setting/Spindle speed range setting"],["G92.5","Workpiece coordinate system rotation"],["G93","Inverse time feed"],["G94","Feed per minute (asynchronous)"],["G95","Feed per revolution (synchronous)"],["G96","Constant surface speed control ON"],["G97","Constant surface speed control OFF"],["G98","Initial point level return in fixed cycles"],["G99","R-point level return in fixed cycles"],["G109","Single program multi-process control"],["G110","Cross machining control axis selection"],["G111","Cross machining control axis cancellation"],["G112","M, S, T, B output to opposite system"],["G113","Hob milling mode OFF"],["G114.3","Hob milling mode ON"],["G130","Tornado cycle"],["G136","Measurement macro"],["G137","Compensation macro"],["G140","Engraving function"],["G148","Orbit machining mode ON"],["G149","Orbit machining mode OFF"],["G270","Finishing cycle"],["G271","Longitudinal roughing cycle"],["G272","Transverse roughing cycle"],["G273","Contour-parallel roughing cycle"],["G274","Longitudinal cut-off cycle"],["G275","Transverse cut-off cycle"],["G276","Compound thread-cutting cycle"],["G283","Face driling cycle"],["G284","Face tapping cycle"],["G284.2","Face synchronous tapping cycle"],["G285","Face boring cycle"],["G287","Outside driling cycle"],["G288","Outside tapping cycle"],["G288.2","Outside synchronous tapping cycle"],["G289","Outside boring cycle"],["G290","Fixed cycle A (Longitudinal turning cycle)"],["G292","Threading cycle"],["G294","Fixed cycle B (Transverse turning cycle)"]]}