ALARMSMazatrol Assistant
CRITICALAlarm code
1107

INCOMPLETE TOOL DATA

What it means

1. Manual tool measurement results cannot be calculated because of tool data items remaining blank. 2. The “tool length” or “tool diameter (nominal diameter)” of the tool was not set in the tool data when executing an MDI program. (MAZATROL tool length and tool diameter are enabled and bit 7 of parameter F84 is set to “1”.)

What to do
  1. 11.
  2. 2Confirm the settings of the machining section, rotational direction, and nose R in the tool data items, and enter the correct data.
  3. 32.
  4. 4Review the tool data and set any missing data.
  5. 5Related parameters (F84 bit 7, F92 bit 7, F93 bit 3) When MAZATROL tool diameter is enabled (F92 bit 7 = 1), enter the “tool diameter (nominal diameter)” .
  6. 6When MAZATROL tool length is enabled (F93 bit 3 = 1), enter the “tool length”.
  7. 7If bit 7 of F84 is set to “0”, missing data will be ignored and the MDI program will be executed.
Codebook — decoded
BError typeRegistered Data — program or tool data error
LStop statusOperation continued — machine still running
NClearingFix cause → Power OFF → Power ON
Still faulted after these steps? Do not restart under load — ask the Mazatrol assistant.
Still stuck? Ask the Mazatrol assistant →