SAFETY SHIELD CALCULATING

1. Calculation for interference checking during automatic operation is in progress. 2. An NC alarm or PLC alarm occurs at the pre-read block. Or an M code is not completed at the pre-read block. When the cause is No. 1 above, nothing will be displayed in parentheses. When the cause is No. 2 above, contributing factors 1, 2 and 3 will be displayed in the parentheses.

1. 11.
2. 2When the Automatic Operation INTELLIGENT SAFETY SHIELD function is valid, the start of automatic operation displays this alarm message, but the alarm will be automatically cleared when the calculation is completed.
3. 3If this alarm occurs except during the start of automatic operation, change the model to a simple one.
4. 4If the single block or feed hold signal is input while an alarm is active, the next operation is not executed even when the alarm is cleared and the machine remains stopped until the cycle start button is pressed again.
5. 52.
6. 6Report the arguments (contributing factors 1, 2 and 3) to the nearest Mazak Technical Center or Technology Center.