ILLEGAL OPER CUTTING PT CTRL

1. When the cutting point control mode was valid, automatic operation was restarted after manual interruption from a position that differs from the position where manual interruption was called. 2. When the cutting point command function is valid, automatic operation was restarted after manual interruption from a rotary axis position that differs from the rotary axis position where manual interruption was called. 3. When the cutting point command function is valid, automatic operation handle interruption or MDI interruption was performed. 4. When the cutting point command function is valid, the mode was changed to the zero-point return mode.

1. 11.
2. 2After manual interruption, in the state the cutting point command function is valid, restart automatic operation only after returning the axes to the position where they were located before manual interruption.
3. 32.
4. 4After manual interruption, in the state the cutting point command function is valid, restart automatic operation only after returning the rotary axis to the position where it was located before manual interruption.
5. 53.
6. 6Do not attempt automatic operation handle interruption or MDI interruption when the cutting point command function is valid.
7. 74.
8. 8When the cutting point command function is valid, changing the mode to the zero-point return mode is not allowed.
9. 9Change the mode to a permissible mode.