ALARMSMazatrol Assistant
CRITICALAlarm code
1159

ILLEGAL WRITING TOOL-OFFSET

What it means

During manual tool measurement (with TOOL EYE), the sensor was turned ON without specifying the destination for writing the tool offset for tool offset measurement.

What to do
  1. 1Move the TOOL EYE sensor away from the tool and turn the sensor OFF.
  2. 2Pressing the RESET key with the sensor turned OFF clears the alarm.
  3. 3After confirming that the alarm has been cleared, set the destination for writing the tool offset and restart the measurement.
Codebook — decoded
AError typeOperation — wrong key or incorrect operation
KStop statusFeed hold — feed stopped, machine ready
OClearingFix cause → press RESET
Still faulted after these steps? Do not restart under load — ask the Mazatrol assistant.
Still stuck? Ask the Mazatrol assistant →