SP ROT. FLUCT. ILLEGAL COMMAND (Alarm No., )
Alarm No. | Cause --- | --- &0000 0001 | A spindle speed fluctuation mode enabling M code was specified while override variable thread cutting was enabled. An override variable thread cutting enabling M code was specified while the spindle speed fluctuation was enabled. &0000 0002 | A spindle speed fluctuation enabling M code was specified in the G61.1 mode. G61.1 was specified while spindle speed fluctuation was enabled. &0000 0004 | A spindle speed fluctuation enabling M code was specified in the polygon machining mode. A polygon machining mode command was specified while spindle speed fluctuation was enabled. &0000 0008 | A spindle speed fluctuation enabling M code was specified in the hobbing mode. A hobbing mode command was specified while spindle speed fluctuation was enabled. &0000 0020 | A spindle speed fluctuation enabling M code was specified during synchronized tapping. A synchronized tapping command was specified while spindle speed fluctuation was enabled. The master spindle in synchronous operation was specified as the spindle for spindle speed fluctuation. &0000 0040 | A spindle for which spindle speed fluctuation was enabled was specified as the master spindle for synchronous operation. The slave spindle in synchronous operation was specified as the spindle for spindle speed fluctuation. &0000 0080 | A spindle for which spindle speed fluctuation was enabled was specified as the slave spindle for synchronous operation. The master axis in the simplified synchronous mode was specified as the servo axis for spindle speed fluctuation. &0000 0100 | A servo axis for which spindle speed fluctuation was enabled was specified as the master axis in the simplified synchronous mode. &0000 0200 | The slave axis in the simplified synchronous mode was specified as the servo axis for spindle speed fluctuation. A servo axis for which spindle speed fluctuation was enabled was specified as the slave axis in the simplified synchronous mode.
- 1Review the program.