What does Mazak alarm 131 mean?

Mazak alarm 131 is "CUTTING FEED OVERRIDE SET AT 0". The cutting-feed override value is set to 0 on the machine operating panel. Error type: Operation — wrong key or incorrect operation. Machine state: Feed hold — feed stopped, machine ready.

How do I fix and clear Mazak alarm 131?

Change the cutting-feed override value to one greater than 0. If this alarm message is displayed when the cutting-feed override value is not 0, check the signal line for a short-circuit. Clearing procedure: Press RESET to clear.

ALARMSMazatrol Assistant

WARNINGAlarm code

131

CUTTING FEED OVERRIDE SET AT 0

What it means

The cutting-feed override value is set to 0 on the machine operating panel.

What to do

1Change the cutting-feed override value to one greater than 0.
2If this alarm message is displayed when the cutting-feed override value is not 0, check the signal line for a short-circuit.

Codebook — decoded

AError typeOperation — wrong key or incorrect operation

KStop statusFeed hold — feed stopped, machine ready

PClearingPress RESET to clear

Still faulted after these steps? Do not restart under load — ask the Mazatrol assistant.

Still stuck? Ask the Mazatrol assistant →