How do I fix and clear Mazak alarm 132?

Change the manual feedrate to a value greater than 0. If this alarm message is displayed when the manual feedrate is not 0, check the signal line for a short-circuit. Clearing procedure: Press RESET to clear.

ALARMSMazatrol Assistant

WARNINGAlarm code

132

FEEDRATE ZERO

Q: What does Mazak alarm 132 mean?

Mazak alarm 132 is "FEEDRATE ZERO". • An attempt has been made to execute an axis movement in the cutting feed mode or dry-run in the automatic operation mode, with the manual feedrate remaining set to 0 on the machine operating panel. • After a restart search, the cycle start button was pressed with the manual feedrate set to 0. Error type: Operation — wrong key or incorrect operation. Machine state: Feed hold — feed stopped, machine ready.

What it means

• An attempt has been made to execute an axis movement in the cutting feed mode or dry-run in the automatic operation mode, with the manual feedrate remaining set to 0 on the machine operating panel. • After a restart search, the cycle start button was pressed with the manual feedrate set to 0.

What to do

1Change the manual feedrate to a value greater than 0.
2If this alarm message is displayed when the manual feedrate is not 0, check the signal line for a short-circuit.

Codebook — decoded

AError typeOperation — wrong key or incorrect operation

KStop statusFeed hold — feed stopped, machine ready

PClearingPress RESET to clear

Still faulted after these steps? Do not restart under load — ask the Mazatrol assistant.

Still stuck? Ask the Mazatrol assistant →