What does Mazak alarm 137 mean?

Mazak alarm 137 is "DYNAMIC COMPENSATION EXCEEDED". Dynamic compensation amount exceeded 3 mm (0.12 in). Error type: Operation — wrong key or incorrect operation. Machine state: Feed hold — feed stopped, machine ready.

How do I fix and clear Mazak alarm 137?

Make sure that the workpiece coordinate zero point is centrally positioned in the workpiece, and set the difference between the center of the workpiece and the rotary center of the table to 3 mm (0.12 in) or less. Clearing procedure: Press RESET to clear.

ALARMSMazatrol Assistant

CRITICALAlarm code

137

DYNAMIC COMPENSATION EXCEEDED

What it means

Dynamic compensation amount exceeded 3 mm (0.12 in).

What to do

1Make sure that the workpiece coordinate zero point is centrally positioned in the workpiece, and set the difference between the center of the workpiece and the rotary center of the table to 3 mm (0.12 in) or less.

Codebook — decoded

AError typeOperation — wrong key or incorrect operation

KStop statusFeed hold — feed stopped, machine ready

PClearingPress RESET to clear

Still faulted after these steps? Do not restart under load — ask the Mazatrol assistant.

Still stuck? Ask the Mazatrol assistant →