How do I fix and clear Mazak alarm 1470?

Take action below against respective causes described above. −1 : Input the data measured on the corresponding machine. −2 : Make measurements again so that the number of measurement points for each error component will not be greater than 128 points (single direction) or 64 points (both directions). −3 : Match the file format (single direction/both directions) of error data with the valid mode (single direction/both directions). If the problem is not solved even after the action above, contact the nearest Mazak Technical Center or Technology Center. Clearing procedure: Tap alarm clear button.

ALARMSMazatrol Assistant

NOTICEAlarm code

1470

INCORRECT DESIGNATED DATA (Note)

Q: What does Mazak alarm 1470 mean?

Mazak alarm 1470 is "INCORRECT DESIGNATED DATA (Note)". Note : −1 : Data in the error file for space error compensation to be transferred to the NC unit does not match the machine configuration. −2 : Error components in the error file for space error compensation have exceeded the specification (single direction: 128 points, both directions: 64 points). −3 : Data in the error file for space error compensation is illegal. Error type: Registered Data — program or tool data error. Machine state: Operation continued — machine still running.

What it means

Note : −1 : Data in the error file for space error compensation to be transferred to the NC unit does not match the machine configuration. −2 : Error components in the error file for space error compensation have exceeded the specification (single direction: 128 points, both directions: 64 points). −3 : Data in the error file for space error compensation is illegal.

What to do

1Take action below against respective causes described above. −1 : Input the data measured on the corresponding machine. −2 : Make measurements again so that the number of measurement points for each error component will not be greater than 128 points (single direction) or 64 points (both directions). −3 : Match the file format (single direction/both directions) of error data with the valid mode (single direction/both directions).
2If the problem is not solved even after the action above, contact the nearest Mazak Technical Center or Technology Center.

Codebook — decoded

BError typeRegistered Data — program or tool data error

LStop statusOperation continued — machine still running

SClearingTap alarm clear button

Still faulted after these steps? Do not restart under load — ask the Mazatrol assistant.

Still stuck? Ask the Mazatrol assistant →