How do I fix and clear Mazak alarm 148?

Review and correct the machining program. If the program is correct, review the tool data and the barrier parameters.

CRITICALAlarm code

148

CHUCK BARRIER (Note 1, Note 2, )

Q: What does Mazak alarm 148 mean?

Mazak alarm 148 is "CHUCK BARRIER (Note 1, Note 2, )". 1. The tool entered in the chuck barrier. Note : 1. Interfering component 1 Display | No. 1 spindle chuck --- | --- 1 | No. 1 spindle chuck 2 | No. 2 spindle chuck 4 | Tailstock 8 | Turret 2. Interfering component 2 Display | Type A | Type B | Type C --- | --- | --- | --- 0 | Tool tip | Turret | Tool, holder, turret 1 | Turret | Holder | — 2 | — | Tool | — Machine type A, B and C above are available according to the settings of the following parameters: Type | BA73 | BA129 bit 1 --- | --- | --- A | Other than 0 | 0 B | — | 1 C | 0 | 0 2. Interference is occurring between the tool and chuck in the solid mode.

What it means

1. The tool entered in the chuck barrier. Note : 1. Interfering component 1 Display | No. 1 spindle chuck --- | --- 1 | No. 1 spindle chuck 2 | No. 2 spindle chuck 4 | Tailstock 8 | Turret 2. Interfering component 2 Display | Type A | Type B | Type C --- | --- | --- | --- 0 | Tool tip | Turret | Tool, holder, turret 1 | Turret | Holder | — 2 | — | Tool | — Machine type A, B and C above are available according to the settings of the following parameters: Type | BA73 | BA129 bit 1 --- | --- | --- A | Other than 0 | 0 B | — | 1 C | 0 | 0 2. Interference is occurring between the tool and chuck in the solid mode.

What to do

1Review and correct the machining program.
2If the program is correct, review the tool data and the barrier parameters.

Codebook — decoded

A (B)Error typeunspecified

K (L)Stop statusunspecified

O (S)Clearingunspecified

Still faulted after these steps? Do not restart under load — ask the Mazatrol assistant.

Still stuck? Ask the Mazatrol assistant →