CYLINDER CHAMFERING IMPOSSIBLE (WNo., UNo., SNo.)

1. An attempt was made to execute the smooth chamfering program with the machine type with which the smooth chamfering function is not available. 2. An attempt was made to execute the smooth chamfering program when the B-axis angle is other than +90° in the end milling slot unit of WPC workpiece scheme. 3. An attempt was made to execute the smooth chamfering program when the machining face is other than cylindrical surface in the C-axis point machining unit of WPC workpiece scheme. 4. An attempt was made to execute the smooth chamfering program when HOLE-DEP is set to a value other than 0 in the chamfering tool sequence for point machining. 5. An attempt was made to execute the smooth chamfering program when the cylinder radius is set to 0 or blank in the end milling slot unit of WPC workpiece scheme. 6. An attempt was made to execute the smooth chamfering program when CHMF is set to 0 or blank in the end milling slot unit or point machining unit.

1. 11.
2. 2Delete the smooth chamfering program.
3. 32.
4. 4Set an index unit before the machining unit that includes smooth chamfering and set angle B to +90°.
5. 53.
6. 6Set the machining face to the cylindrical surface in the C-axis point machining unit.
7. 74.
8. 8Set HOLE-DEP in the chamfering tool sequence to 0.
9. 95.
10. 10Input the correct cylinder radius value in the end milling slot unit.
11. 116.
12. 12Input the correct value for CHMF.