ALARMSMazatrol Assistant
CRITICALAlarm code
1833

ILLEGAL COND. CORRECT LENGTH.C (WNo., NNo., BNo.)

What it means

Tool length compensation G43P3 is issued under any of the following conditions. 1. Pinch cut or Y-axis turning option is invalid. 2. The machine is not equipped with tool length C compensation, or tool length C compensation is made invalid. (Parameter BA131 bit 1 = 0) 3. MAZATROL tool length is invalid. (Parameter F93 bit 3 = 0) 4. Tool length A, B or C is not set for the current tool in MAZATROL tool data.

What to do
  1. 11.
  2. 2Pinch cut or Y-axis turning option must be purchased.
  3. 32.
  4. 4If the machine is not equipped with tool length C compensation, correct the program so that the G43P3 command is not used.
  5. 5If the machine is equipped with tool length C compensation, make tool length C compensation valid. (Parameter BA131 bit 1 = 1) 3.
  6. 6Make MAZATROL tool length valid. (Parameter F93 bit 3 = 1) 4.
  7. 7Set tool length A, B and C for the current tool in MAZATROL tool data.
Codebook — decoded
BError typeRegistered Data — program or tool data error
I (L)Stop statusunspecified
O (S)Clearingunspecified
Still faulted after these steps? Do not restart under load — ask the Mazatrol assistant.
Still stuck? Ask the Mazatrol assistant →