FILE ACCESS ERROR (Cause, )

1. Before reading the program for the control path in which the alarm occurred, a process was executed in response to a command specified in another control path. 2. Access to the program file used for the hard disk or Ethernet operation did not complete within the preset time.

1. 11.
2. 2Add a queuing command before the following commands.
3. 3Cross machining command (G110), C-axis selection M code, synchronization cancellation M code 2.
4. 4Set a larger value for parameter SU55 and check if the alarm reoccurs.
5. 5When running the machine using Ethernet, review the network environment.
6. 6If the problem cannot be solved by these checks, note the numbers in the parentheses and contact the nearest Mazak Technical Center or Technology Center.