How do I fix and clear Mazak alarm 310?

1. Check if the chuck holds the workpiece correctly. 2. If the diameter of the workpiece currently inserted in the chuck is different from that of the previous workpiece, or if the stroke of the chuck jaw has been changed, check also if the chuck opening/closing sensor works normally when a workpiece is set in the chuck. If necessary, adjust the position of the sensor. Clearing procedure: Fix cause → press RESET.

ALARMSMazatrol Assistant

CRITICALAlarm code

310

SPINDLE MISS CHUCK

Q: What does Mazak alarm 310 mean?

Mazak alarm 310 is "SPINDLE MISS CHUCK". Mis-chucking has been detected under the specifications of the machine provided with chuck open/close confirmation sensors. Error type: Machine (PLC) — machine failure. Machine state: Feed hold — feed stopped, machine ready.

What it means

Mis-chucking has been detected under the specifications of the machine provided with chuck open/close confirmation sensors.

What to do

11.
2Check if the chuck holds the workpiece correctly.
32.
4If the diameter of the workpiece currently inserted in the chuck is different from that of the previous workpiece, or if the stroke of the chuck jaw has been changed, check also if the chuck opening/closing sensor works normally when a workpiece is set in the chuck.
5If necessary, adjust the position of the sensor.

Codebook — decoded

FError typeMachine (PLC) — machine failure

KStop statusFeed hold — feed stopped, machine ready

OClearingFix cause → press RESET

Still faulted after these steps? Do not restart under load — ask the Mazatrol assistant.

Still stuck? Ask the Mazatrol assistant →