What does Mazak alarm 317 mean?

Mazak alarm 317 is "C AXIS CONNECTION TIME OVER". The connection of the C-axis was not completed within 30 seconds after the issue of a C-axis connect command. Error type: Spindle — spindle control mechanism malfunction. Machine state: Feed hold — feed stopped, machine ready.

How do I fix and clear Mazak alarm 317?

1. Press the RESET key. 2. Turn the main power disconnect switch off and then back on, and check if the C-axis can be connected correctly. If the alarm is not released, contact the nearest Mazak Technical Center or Technology Center. Clearing procedure: Fix cause → Power OFF → Power ON.

ALARMSMazatrol Assistant

WARNINGAlarm code

317

C AXIS CONNECTION TIME OVER

What it means

The connection of the C-axis was not completed within 30 seconds after the issue of a C-axis connect command.

What to do

11.
2Press the RESET key.
32.
4Turn the main power disconnect switch off and then back on, and check if the C-axis can be connected correctly.
5If the alarm is not released, contact the nearest Mazak Technical Center or Technology Center.

Codebook — decoded

DError typeSpindle — spindle control mechanism malfunction

KStop statusFeed hold — feed stopped, machine ready

NClearingFix cause → Power OFF → Power ON

Still faulted after these steps? Do not restart under load — ask the Mazatrol assistant.

Still stuck? Ask the Mazatrol assistant →