How do I fix and clear Mazak alarm 323?

Check if the operation of the TOOL EYE is hindered by chips etc. Clearing procedure: Fix cause → press RESET.

WARNINGAlarm code

323

TOOL EYE ARM POS. SENSOR MALF.

Q: What does Mazak alarm 323 mean?

Mazak alarm 323 is "TOOL EYE ARM POS. SENSOR MALF.". It cannot be confirmed whether the TOOL EYE unit operates normally. 1. The TOOL EYE forward end sensor does not work normally. 2. The TOOL EYE backward end sensor does not work normally. Error type: Machine (PLC) — machine failure. Machine state: Feed hold — feed stopped, machine ready.

What it means

It cannot be confirmed whether the TOOL EYE unit operates normally. 1. The TOOL EYE forward end sensor does not work normally. 2. The TOOL EYE backward end sensor does not work normally.

What to do

1Check if the operation of the TOOL EYE is hindered by chips etc.

Codebook — decoded

FError typeMachine (PLC) — machine failure

KStop statusFeed hold — feed stopped, machine ready

OClearingFix cause → press RESET

Still faulted after these steps? Do not restart under load — ask the Mazatrol assistant.

Still stuck? Ask the Mazatrol assistant →