CRITICALAlarm code
383
SPINDEL GEAR LUBE PRE ALARM
What it means
No hydraulic pressure is detected at the turning spindle gear lubricating unit.
What to do
- 1Check the pressure detection sensor at the turning spindle gear lubricating unit.
- 2If the alarm is not released, contact the nearest Mazak Technical Center or Technology Center.
Codebook — decoded
FError typeMachine (PLC) — machine failure
KStop statusFeed hold — feed stopped, machine ready
O, QClearingunspecified
Still faulted after these steps? Do not restart under load — ask the Mazatrol assistant.
Still stuck? Ask the Mazatrol assistant →