How do I fix and clear Mazak alarm 585?

Check if the DNC cables are correctly connected. Check if the host system is turned on and ready for data transmission/reception. There may be cases that although a DNC option is provided, DNC itself is not to be used for the time being and thus the DNC cables are not yet connected. If this is the case, then set the appropriate parameter (DNC26, bit 1) to OFF (0). This will clear the alarm display. Clearing procedure: Tap alarm clear button.

ALARMSMazatrol Assistant

NOTICEAlarm code

585

CABLE MIS-CONNECTED

Q: What does Mazak alarm 585 mean?

Mazak alarm 585 is "CABLE MIS-CONNECTED". This message implies incorrect cable connection between the host system and the NC unit or implies a power-off status. Machine state: Operation continued — machine still running.

What it means

This message implies incorrect cable connection between the host system and the NC unit or implies a power-off status.

What to do

1Check if the DNC cables are correctly connected.
2Check if the host system is turned on and ready for data transmission/reception.
3There may be cases that although a DNC option is provided, DNC itself is not to be used for the time being and thus the DNC cables are not yet connected.
4If this is the case, then set the appropriate parameter (DNC26, bit 1) to OFF (0).
5This will clear the alarm display.

Codebook — decoded

( , ) GError typeunspecified

LStop statusOperation continued — machine still running

SClearingTap alarm clear button

Still faulted after these steps? Do not restart under load — ask the Mazatrol assistant.

Still stuck? Ask the Mazatrol assistant →