CRITICALAlarm code

ENDMILL DIAMETER EXCEEDED (WNo., UNo., SNo.)

Q: What does Mazak alarm 625 mean?

Mazak alarm 625 is "ENDMILL DIAMETER EXCEEDED (WNo., UNo., SNo.)". The value of "(groove width) - (finish allowance R) × 2" of the endmill groove unit is smaller than the "tool diameter" value of the rough-machining tool. The "groove width" value of the endmill groove unit is smaller than the "tool diameter" value of the finishing tool. Error type: Registered Data — program or tool data error.

What it means

The value of "(groove width) - (finish allowance R) × 2" of the endmill groove unit is smaller than the "tool diameter" value of the rough-machining tool. The "groove width" value of the endmill groove unit is smaller than the "tool diameter" value of the finishing tool.

What to do

1—

Codebook — decoded

BError typeRegistered Data — program or tool data error

I (L)Stop statusunspecified

O (S)Clearingunspecified

Still faulted after these steps? Do not restart under load — ask the Mazatrol assistant.

Still stuck? Ask the Mazatrol assistant →