How do I fix and clear Mazak alarm 706?

Change the machining pattern (from inversed type to fixed type, for example); or divide the machining shape in advance so that it will not be separated by offsetting. Clearing procedure: Fix cause → press RESET.

ALARMSMazatrol Assistant

NOTICEAlarm code

706

ILLEGAL FIGURE DATA (WNo., UNo., SNo.)

Q: What does Mazak alarm 706 mean?

Mazak alarm 706 is "ILLEGAL FIGURE DATA (WNo., UNo., SNo.)". The shape has been separated into three segments or more as a result of offsetting. The inside form does not contain the center of the outside form for outside-related fixed path. The outside form is concave for inside-related fixed path. The inside form is not adequate since it contains a concave or an intersection. Error type: Registered Data — program or tool data error. Machine state: Operation continued — machine still running.

What it means

The shape has been separated into three segments or more as a result of offsetting. The inside form does not contain the center of the outside form for outside-related fixed path. The outside form is concave for inside-related fixed path. The inside form is not adequate since it contains a concave or an intersection.

What to do

1Change the machining pattern (from inversed type to fixed type, for example); or divide the machining shape in advance so that it will not be separated by offsetting.

Codebook — decoded

BError typeRegistered Data — program or tool data error

LStop statusOperation continued — machine still running

OClearingFix cause → press RESET

Still faulted after these steps? Do not restart under load — ask the Mazatrol assistant.

Still stuck? Ask the Mazatrol assistant →