How do I fix and clear Mazak alarm 707?

1. Use a tool which does not interfere with the side wall or bottom. 2. Shorten the chamfering width or use a tool having a long cutting edge. 3. With Smooth chamfering, always use a chamfering tool with a chamfering angle of 45°. Clearing procedure: Fix cause → press RESET.

ALARMSMazatrol Assistant

WARNINGAlarm code

707

CHAMFER CUTTER INTERFERENCE (WNo., UNo., SNo.)

Q: What does Mazak alarm 707 mean?

Mazak alarm 707 is "CHAMFER CUTTER INTERFERENCE (WNo., UNo., SNo.)". 1. The chamfering tool interferes with the side wall or bottom. 2. The tool edge is not in perfect contact with the surface to chamfer. 3. A chamfering tool with a chamfering angle other than 45° is used for Smooth chamfering. Error type: Registered Data — program or tool data error. Machine state: Feed hold — feed stopped, machine ready.

What it means

1. The chamfering tool interferes with the side wall or bottom. 2. The tool edge is not in perfect contact with the surface to chamfer. 3. A chamfering tool with a chamfering angle other than 45° is used for Smooth chamfering.

What to do

11.
2Use a tool which does not interfere with the side wall or bottom.
32.
4Shorten the chamfering width or use a tool having a long cutting edge.
53.
6With Smooth chamfering, always use a chamfering tool with a chamfering angle of 45°.

Codebook — decoded

BError typeRegistered Data — program or tool data error

KStop statusFeed hold — feed stopped, machine ready

OClearingFix cause → press RESET

Still faulted after these steps? Do not restart under load — ask the Mazatrol assistant.

Still stuck? Ask the Mazatrol assistant →