What does Mazak alarm 82 mean?

Mazak alarm 82 is "SPINDLE WARNING". The inertia on the spindle has become excessive. Error type: NC Equipment — system hardware/software error. Machine state: Emergency stop — machine fully stopped.

How do I fix and clear Mazak alarm 82?

Contact the nearest Mazak Technical Center or Technology Center. Note : If this alarm is displayed after replacing the workpiece, the situation may be improved by executing the inertia estimation function. Clearing procedure: Fix cause → press RESET.

ALARMSMazatrol Assistant

CRITICALAlarm code

SPINDLE WARNING

What it means

The inertia on the spindle has become excessive.

What to do

1Contact the nearest Mazak Technical Center or Technology Center.
2Note : If this alarm is displayed after replacing the workpiece, the situation may be improved by executing the inertia estimation function.

Codebook — decoded

EError typeNC Equipment — system hardware/software error

HStop statusEmergency stop — machine fully stopped

OClearingFix cause → press RESET

Still faulted after these steps? Do not restart under load — ask the Mazatrol assistant.

Still stuck? Ask the Mazatrol assistant →