How do I fix and clear Mazak alarm 992?

1. Contact the nearest Mazak Technical Center or Technology Center. 2. Refer to the relevant user macroprogram instruction manual to check the alarm. 3. MDI-MMS is possible only with the head in its horizontal or vertical machining position.

ALARMSMazatrol Assistant

CRITICALAlarm code

992

MACRO MEASUREMENT ALARM 3 ( , )

Q: What does Mazak alarm 992 mean?

Mazak alarm 992 is "MACRO MEASUREMENT ALARM 3 ( , )". 1. Correct signals were not output due to an error in the coordinate measurement program for the touch sensor, receiver, etc. 2. #3000 = 13 (alarm message) in the user macroprogram was executed. 3. An attempt has been made to perform MDI-MMS with the head not in its horizontal or vertical machining position. Error type: Registered Data — program or tool data error.

What it means

1. Correct signals were not output due to an error in the coordinate measurement program for the touch sensor, receiver, etc. 2. #3000 = 13 (alarm message) in the user macroprogram was executed. 3. An attempt has been made to perform MDI-MMS with the head not in its horizontal or vertical machining position.

What to do

11.
2Contact the nearest Mazak Technical Center or Technology Center.
32.
4Refer to the relevant user macroprogram instruction manual to check the alarm.
53.
6MDI-MMS is possible only with the head in its horizontal or vertical machining position.

Codebook — decoded

BError typeRegistered Data — program or tool data error

I (L)Stop statusunspecified

O (S)Clearingunspecified

Still faulted after these steps? Do not restart under load — ask the Mazatrol assistant.

Still stuck? Ask the Mazatrol assistant →