How do I fix and clear Mazak alarm 996?

1. Refer to the relevant user macroprogram instruction manual to check the alarm. 2. Check that the touch sensor is in contact with the measurement plane during measurement. In addition, review the value set for parameter K221 (maximum C-axis angle variation).

ALARMSMazatrol Assistant

CRITICALAlarm code

996

MACRO MEASUREMENT ALARM 7 ( , )

Q: What does Mazak alarm 996 mean?

Mazak alarm 996 is "MACRO MEASUREMENT ALARM 7 ( , )". 1. #3000 = 17 (alarm message) in the user macroprogram was executed. 2. In a coordinate measurement unit (plane inclination C measurement), the C-axis inclination angle of the measurement plane is greater than the value set for parameter K221 (maximum C-axis angle variation). Error type: Registered Data — program or tool data error.

What it means

1. #3000 = 17 (alarm message) in the user macroprogram was executed. 2. In a coordinate measurement unit (plane inclination C measurement), the C-axis inclination angle of the measurement plane is greater than the value set for parameter K221 (maximum C-axis angle variation).

What to do

11.
2Refer to the relevant user macroprogram instruction manual to check the alarm.
32.
4Check that the touch sensor is in contact with the measurement plane during measurement.
5In addition, review the value set for parameter K221 (maximum C-axis angle variation).

Codebook — decoded

BError typeRegistered Data — program or tool data error

I (L)Stop statusunspecified

O (S)Clearingunspecified

Still faulted after these steps? Do not restart under load — ask the Mazatrol assistant.

Still stuck? Ask the Mazatrol assistant →