How do I fix and clear Mazak alarm 997?

1. Refer to the relevant user macroprogram instruction manual to check the alarm. 2. Check that the touch sensor is in contact with the measurement plane during measurement. In addition, review the value set for parameter K223 (permissible difference for skip coordinates X).

ALARMSMazatrol Assistant

CRITICALAlarm code

997

MACRO MEASUREMENT ALARM 8 ( , )

Q: What does Mazak alarm 997 mean?

Mazak alarm 997 is "MACRO MEASUREMENT ALARM 8 ( , )". 1. #3000 = 18 (alarm message) in the user macroprogram was executed. 2. The number of measurements in a coordinate measurement unit (plane inclination C measurement) has exceeded the value set for K222 (number of re-measurements). Error type: Registered Data — program or tool data error.

What it means

1. #3000 = 18 (alarm message) in the user macroprogram was executed. 2. The number of measurements in a coordinate measurement unit (plane inclination C measurement) has exceeded the value set for K222 (number of re-measurements).

What to do

11.
2Refer to the relevant user macroprogram instruction manual to check the alarm.
32.
4Check that the touch sensor is in contact with the measurement plane during measurement.
5In addition, review the value set for parameter K223 (permissible difference for skip coordinates X).

Codebook — decoded

BError typeRegistered Data — program or tool data error

I (L)Stop statusunspecified

O (S)Clearingunspecified

Still faulted after these steps? Do not restart under load — ask the Mazatrol assistant.

Still stuck? Ask the Mazatrol assistant →