Return to 2nd, 3rd and 4th reference points

Q: What does Mazak G-code G30 do?

G30 — Return to 2nd, 3rd and 4th reference points on the MAZATROL SmoothX control (INTEGREX e-670H). The returning to the second, third, or fourth reference point can be programmed by setting “G30 Second reference point First reference point Starting point Interm. point Third reference point Fourth reference point As with G28, execution of a G27 command will output a completion signal for return to the refe- rence point if the position arrived on the specified axis is the reference point. This function with positioning data for the reference point can be used, therefore, to check whether or not the execution of a program is brought to an end with the reference point being arrived on the specified axes.

Q: What is the programming format of G30?

G30 P2 (P3, P4) Xx Yy Zz 1 ; (: Addition axis.) G27 Xx Yy Zz Pp 1 1 1 1 Check No.

Machine-specific. This G-code reference is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (EIA/ISO programming manual H747PB0030E). G-code availability depends on fitted options, and groups and behaviour differ between Mazak models and control generations — verify against the manual for your own machine before programming with any code.

What it does

The returning to the second, third, or fourth reference point can be programmed by setting “G30 Second reference point First reference point Starting point Interm. point Third reference point Fourth reference point As with G28, execution of a G27 command will output a completion signal for return to the refe- rence point if the position arrived on the specified axis is the reference point. This function with positioning data for the reference point can be used, therefore, to check whether or not the execution of a program is brought to an end with the reference point being arrived on the specified axes.

G30 is one-shot (group 00) — it is valid only in the block where it is entered.

Programming format

G30 P2 (P3, P4) Xx
Yy
Zz
1 ; (: Addition axis.)
G27 Xx Yy Zz Pp
1 1 1 1
Check No.

Address words

P1: First reference point check
P2: Second reference point check
P3: Third reference point check
P4: Fourth reference point check
Return control axis
Check command

Source

Mazak PROGRAMMING MANUAL for EIA/ISO PROGRAM, manual H747PB0030E, section 14-11 Return to Second Reference Point (Zero Point): G30, p. 3-11, 14-28, 14-29, 14-30. Reference and explanation only — not a reproduction of the manual.

Not sure how to use it? Ask the Mazatrol assistant →