Hole machining pattern cycle (on a line)

Q: What does Mazak G-code G35 do?

G35 — Hole machining pattern cycle (on a line) on the MAZATROL SmoothX control (INTEGREX e-670H). Hole machining patterns are used to arrange on a predetermined pattern hole positions at which to execute a hole-machining cycle.  Give beforehand a command of the desired hole-machining cycle without any axis positioning data (which only causes storage of the hole-machining data to be executed at the arranged hole positions).  The execution of this command begins with the positioning to the first one of the arranged holes. The type of hole machining depends on the corresponding cycle designated last.  The current mode of hole-machining cycle will remain active over the execution of this command till it is cancelled explicitly.  This command will only activate positioning when it is given in any other mode than those of hole-machining cycle.  These commands only cause positioning at the

Machine-specific. This G-code reference is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (EIA/ISO programming manual H747PB0030E). G-code availability depends on fitted options, and groups and behaviour differ between Mazak models and control generations — verify against the manual for your own machine before programming with any code.

What it does

Hole machining patterns are used to arrange on a predetermined pattern hole positions at which to execute a hole-machining cycle.  Give beforehand a command of the desired hole-machining cycle without any axis positioning data (which only causes storage of the hole-machining data to be executed at the arranged hole positions).  The execution of this command begins with the positioning to the first one of the arranged holes. The type of hole machining depends on the corresponding cycle designated last.  The current mode of hole-machining cycle will remain active over the execution of this command till it is cancelled explicitly.  This command will only activate positioning when it is given in any other mode than those of hole-machining cycle.  These commands only cause positioning at the speed of the current modal condition (of G-code group 01) in default of any preceding hole-machining cycle. 2. List of hole machining pattern cycles G-code Description Argument addresses Remarks G34.1 Holes on a circle X, Y, I, J, K G35 Holes on a line X, Y, I, J, K […]

G35 is one-shot (group 00) — it is valid only in the block where it is entered.

Programming format

G35 Holes on a line X, Y, I, J, K

Address words

Note : In order that it may function correctly, do not give a command of hole machining pattern

Notes & precautions

In order that it may function correctly, do not give a command of hole machining pattern

Source

Mazak PROGRAMMING MANUAL for EIA/ISO PROGRAM, manual H747PB0030E, section 13-2 Hole Machining Pattern Cycles: G34.1/G35/G36/G37.1, p. 3-11, 13-27, 13-29, 13-30. Reference and explanation only — not a reproduction of the manual.

Not sure how to use it? Ask the Mazatrol assistant →