What does Mazak M-code M234 do?

M234 — Turning Spindle (No. 1) Chuck Clamp Pressure HIGH Select (Option) on the MAZATROL SmoothX control (INTEGREX e-670H). This function code changes the gripping pressure of the turning spindle (No. 1) chuck to a high pressure.

‹ALARMSMazatrol Assistant

M-CODEM function · MAZATROL SmoothX · option

M234

Turning Spindle (No. 1) Chuck Clamp Pressure HIGH Select (Option)

Q: Is M234 available on every INTEGREX e-670H?

M234 is an option — it is not fitted on every machine. Check your machine's specification before using it.

Machine-specific. This M-code list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). M-code assignments differ between Mazak models, control generations and PLC configurations — verify against the manual for your own machine before relying on any code.

What it does

This function code changes the gripping pressure of the turning spindle (No. 1) chuck to a high pressure.

Option: this function is not fitted on every machine — check your machine’s specification.

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 845. Reference and explanation only — not a reproduction of the manual.

Not sure how to use it? Ask the Mazatrol assistant →