ALARMSM-code list

Every SmoothX
M-code.

196 M-codes from the Mazak manual, including the ones listed as not used — so “is M47 assigned on this machine?” has an answer. Codes marked *1 apply only to turning spindle No. 2 on the twin-spindle e-670H-S.

Machine-specific. This M-code list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). M-code assignments differ between Mazak models, control generations and PLC configurations — verify against the manual for your own machine before relying on any code.
196 of 196 M-codes

M00–M99 · 47

  1. M00Program Stop
  2. M01Optional Stop
  3. M02End of Program
  4. M03Start of Forward Milling Spindle Rotation
  5. M04Start of Backward Milling Spindle Rotation
  6. M05Stop of Milling Spindle Rotation
  7. M06Tool Change
  8. M07Not used on this machine
  9. M08Flood Coolant ON
  10. M09All Coolants OFF
  11. M10Mill spindle tool clamp
  12. M11Mill spindle tool unclamp
  13. M15ATC Cover Close
  14. M16ATC Cover Open
  15. M17Not used on this machine
  16. M18Not used on this machine
  17. M19Milling Spindle Orientation
  18. M24Error Detect OFF
  19. M30Reset and Rewind
  20. M33Laser Tool Length Measuring Mode ON (Option)OPTION
  21. M34Laser Tool Length Measuring Mode OFF (Option)OPTION
  22. M35Not used on this machine
  23. M38Not used on this machine
  24. M39Not used on this machine
  25. M42Not used on this machine
  26. M46Not used on this machine
  27. M47Not used on this machine
  28. M48Cancellation of M49
  29. M49Override Cancel
  30. M50Not used on this machine
  31. M51Milling Spindle-Through Coolant ON
  32. M52Not used on this machine
  33. M58Tool Life Check
  34. M68Not used on this machine
  35. M69Not used on this machine
  36. M71Not used on this machine
  37. M72Not used on this machine
  38. M73Not used on this machine
  39. M74Not used on this machine
  40. M75Not used on this machine
  41. M76Not used on this machine
  42. M90Not used on this machine
  43. M91Not used on this machine
  44. M92Not used on this machine
  45. M93Not used on this machine
  46. M98Subprogram Call
  47. M99Return to Main Program

M100–M199 · 38

  1. M101High-pressure Coolant Pressure Selection 2 (Option)OPTION
  2. M102High-pressure Coolant Pressure Selection 3 (Option)OPTION
  3. M103High-pressure Coolant Pressure Selection 4 (Option)OPTION
  4. M104High-pressure Coolant Pressure Selection 5 (Option)OPTION
  5. M105High-pressure Coolant Pressure Selection 6 (Option)OPTION
  6. M106High-pressure Coolant Pressure Selection 7 (Option)OPTION
  7. M107B-Axis Clamping
  8. M108B-Axis Unclamping
  9. M110Milling Spindle Clamping
  10. M111Milling Spindle Unclamping
  11. M120Automatic Power Cutoff
  12. M122Not used on this machine
  13. M123Not used on this machine
  14. M129Flood Air Blast ON (Option)OPTION
  15. M130Not used on this machine
  16. M131High-pressure Through-mill-spindle Coolant ON
  17. M132Milling Spindle-Through Air ON
  18. M134Not used on this machine
  19. M137Not used on this machine
  20. M138Not used on this machine
  21. M139Heavy Tool Mode Cancel
  22. M140Heavy Tool Mode ON
  23. M149Magazine Rotation
  24. M155Not used on this machine
  25. M160Not used on this machine
  26. M163Milling Spindle-Through Coolant OFF
  27. M169Cancellation of M170
  28. M170AFC Cancel
  29. M173Not used on this machine
  30. M174Not used on this machine
  31. M180Not used on this machine
  32. M181Not used on this machine
  33. M187Laser Tool Length Measuring Setup Confirmation (Option)OPTION
  34. M195Not used on this machine
  35. M196Not used on this machine
  36. M197Not used on this machine
  37. M198Not used on this machine
  38. M199Not used on this machine

M200–M299 · 45

  1. M200Turning Spindle C-Axis Connect/Milling Mode Select
  2. M202Turning Spindle C-Axis Disconnect/Turning Mode Select
  3. M203Start of Forward Turning Spindle Rotation
  4. M204Start of Backward Turning Spindle Rotation
  5. M205Stop of Turning Spindle Rotation
  6. M206Turning Spindle Chuck Open
  7. M207Turning Spindle Chuck Close
  8. M210Turning Spindle C-Axis Clamping
  9. M211Turning Spindle C-Axis Braking
  10. M212Turning Spindle C-Axis Unclamping
  11. M219Turning Spindle Orientation
  12. M231Tailstock Forward
  13. M232Tailstock Backward
  14. M234Turning Spindle (No. 1) Chuck Clamp Pressure HIGH Select (Option)OPTION
  15. M238Putting the turning spindle gear shift mechanism into a low-speed position.
  16. M239Putting the turning spindle gear shift mechanism into a high-speed position.
  17. M240Putting the turning spindle gear shift mechanism into neutral.
  18. M241Turning Spindle Motor High-Speed Coil Select
  19. M243Turning Spindle Motor Low-Speed Coil Select
  20. M253Chamfering OFF
  21. M254Chamfering ON
  22. M256Front Door (Top Door) Open (Option)OPTION
  23. M258Turning Spindle Air Blast ON (Option)OPTION
  24. M259Turning Spindle Air Blast OFF (Option)OPTION
  25. M264Turning Spindle Jaw Coolant ON (Option)OPTION
  26. M265Turning Spindle Jaw Coolant OFF (Option)OPTION
  27. M266Turning Spindle Shower Coolant ON (Option)OPTION
  28. M267Turning Spindle Shower Coolant OFF (Option)OPTION
  29. M268Turning Spindle-Through Coolant ON (Option)OPTION
  30. M269Turning Spindle-Through Coolant OFF (Option)OPTION
  31. M270Turning Spindle-Through Air Blast ON (Option)OPTION
  32. M271Turning Spindle-Through Air Blast OFF (Option)OPTION
  33. M272Turning Spindle (No. 1) Chuck, ID Chucking Selection
  34. M273Turning Spindle (No. 1) Chuck, OD Chucking Selection
  35. M281Touch probe ON (option)OPTION
  36. M282Touch probe OFF (option)OPTION
  37. M283Tool Measurement Start (Option)OPTION
  38. M285Work Rest 1 Coolant ON (Option)OPTION
  39. M286Work Rest 1 Coolant OFF (Option)OPTION
  40. M287Work Rest 2 Coolant ON (Option)OPTION
  41. M288Work Rest 2 Coolant OFF (Option)OPTION
  42. M292Work Rest 1 Unclamp (Option)OPTION
  43. M293Work Rest 1 Clamp (Option)OPTION
  44. M294Work Rest 2 Unclamp (Option)OPTION
  45. M295Work Rest 2 Clamp (Option)OPTION

M300–M399 · 26

  1. M300Turning Spindle No. 2 C-Axis Connect/Milling Mode Select *1
  2. M302Turning Spindle No. 2 C-Axis Disconnect/Turning Mode Select *1
  3. M303Start of Forward Turning Spindle No. 2 Rotation *1
  4. M304Start of Backward Turning Spindle No. 2 Rotation *1
  5. M305Stop of Turning Spindle No. 2 Rotation *1
  6. M306Turning Spindle No. 2 Chuck Open *1
  7. M307Turning Spindle No. 2 Chuck Close *1
  8. M310Turning Spindle No. 2 C-Axis Clamping *1
  9. M311Turning Spindle No. 2 C-Axis Braking *1
  10. M312Turning Spindle No. 2 C-Axis Unclamping *1
  11. M333Turning Spindle (No. 2) Chuck Clamp Pressure LOW Select (Option) *1OPTION
  12. M334Turning Spindle (No. 2) Chuck Clamp Pressure HIGH Select (Option) *1OPTION
  13. M341Turning Spindle No. 2 Motor High-Speed Coil Select *1
  14. M343Turning Spindle No. 2 Motor Low-Speed Coil Select *1
  15. M358Turning Spindle No. 2 Air Blast ON *1
  16. M359Turning Spindle No. 2 Air Blast OFF *1
  17. M364Turning Spindle No. 2 Jaw Coolant ON (Option) *1OPTION
  18. M365Turning Spindle No. 2 Jaw Air Coolant OFF (Option) *1OPTION
  19. M366Turning Spindle No. 2 Shower Coolant ON (Option) *1OPTION
  20. M367Turning Spindle No. 2 Shower Coolant OFF (Option) *1OPTION
  21. M368Turning Spindle No. 2 Spindle-Through Coolant ON (Option) *1OPTION
  22. M369Turning Spindle No. 2 Spindle-Through Coolant OFF (Option) *1OPTION
  23. M370Turning Spindle No. 2 Spindle-Through Air Blast ON (Option) *1OPTION
  24. M371Turning Spindle No. 2 Spindle-Through Air Blast OFF (Option) *1OPTION
  25. M372Turning Spindle (No. 2) Chuck, ID Chucking Selection *1
  26. M373Turning Spindle (No. 2) Chuck, OD Chucking Selection *1

M400–M499 · 19

  1. M400External M-Code Output 1 (Option)OPTION
  2. M401External M-Code Output 2 (Option)OPTION
  3. M402External M-Code Output 3 (Option)OPTION
  4. M403External M-Code Output 4 (Option)OPTION
  5. M404External M-Code Output 5 (Option)OPTION
  6. M405External M-Code Output 6 (Option)OPTION
  7. M406External M-Code Output 7 (Option)OPTION
  8. M408External M-Code Output 9 (Option)OPTION
  9. M409External M-Code Output 10 (Option)OPTION
  10. M410External M-Code Output 11 (Option)OPTION
  11. M411External M-Code Output 12 (Option)OPTION
  12. M412External M-Code Output 13 (Option)OPTION
  13. M413External M-Code Output 14 (Option)OPTION
  14. M414External M-Code Output 15 (Option)OPTION
  15. M415External M-Code Output 16 (Option)OPTION
  16. M416External M-Code Output 17 (Option)OPTION
  17. M417External M-Code Output 18 (Option)OPTION
  18. M418External M-Code Output 19 (Option)OPTION
  19. M419External M-Code Output 20 (Option)OPTION

M500–M599 · 5

  1. M540TRANSFER mode ON (only for INTEGREX e-670H-S)
  2. M541TRANSFER mode OFF (only for INTEGREX e-670H-S)
  3. M542TRANSFER BAR mode ON (only for INTEGREX e-670H-S)
  4. M543TRANSFER BAR mode OFF (only for INTEGREX e-670H-S)
  5. M557High-pressure Coolant Pressure Setting Cancel (Option)OPTION

M600–M699 · 8

  1. M610Grinder Mode ON (Option)OPTION
  2. M611Grinder Milling Spindle Speed Set (Option)OPTION
  3. M612Grinder Mode OFF (Option)OPTION
  4. M613Mist Collector ON (Option)OPTION
  5. M614Mist Collector OFF (Option)OPTION
  6. M673Long Boring Bar Coolant OFF
  7. M674Long Boring Bar Air Blow ON
  8. M675Long Boring Bar Air Blow OFF

M800–M899 · 6

  1. M831Tailstock Thrust Setup
  2. M841Tailstock Movement to “Position 1”
  3. M842Tailstock Movement to “Position 2”
  4. M843Tailstock Movement to “Reverse Position”
  5. M844Tailstock Interlock Cancel
  6. M845Cancellation of M844

M900–M999 · 2

  1. M998Program Chain (WNo. Search  Cycle Start)
  2. M999Program Chain (WNo. Search Only)