Turning Spindle Air Blast ON (Option)

Q: What does Mazak M-code M258 do?

M258 — Turning Spindle Air Blast ON (Option) on the MAZATROL SmoothX control (INTEGREX e-670H). This function code activates turning spindle air blasting. At this time, the turning spindle rotates at about min–1. 50 Air blasting stops after the elapse of the timer-set time. Timer setting: PLC parameter TIM75.

Q: Is M258 available on every INTEGREX e-670H?

M258 is an option — it is not fitted on every machine. Check your machine's specification before using it.

Machine-specific. This M-code list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). M-code assignments differ between Mazak models, control generations and PLC configurations — verify against the manual for your own machine before relying on any code.

What it does

This function code activates turning spindle air blasting. At this time, the turning spindle rotates at about min–1. 50 Air blasting stops after the elapse of the timer-set time. Timer setting: PLC parameter TIM75.

Option: this function is not fitted on every machine — check your machine’s specification.

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 845. Reference and explanation only — not a reproduction of the manual.

Not sure how to use it? Ask the Mazatrol assistant →