What does Mazak M-code M282 do?

M282 — Touch probe OFF (option) on the MAZATROL SmoothX control (INTEGREX e-670H). This function code turns the touch type sensor probe mounted in the milling spindle OFF.

‹ALARMSMazatrol Assistant

M-CODEM function · MAZATROL SmoothX · option

M282

Touch probe OFF (option)

Q: Is M282 available on every INTEGREX e-670H?

M282 is an option — it is not fitted on every machine. Check your machine's specification before using it.

Machine-specific. This M-code list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). M-code assignments differ between Mazak models, control generations and PLC configurations — verify against the manual for your own machine before relying on any code.

What it does

This function code turns the touch type sensor probe mounted in the milling spindle OFF.

Option: this function is not fitted on every machine — check your machine’s specification.

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 845. Reference and explanation only — not a reproduction of the manual.

Not sure how to use it? Ask the Mazatrol assistant →