Work Rest 1 Clamp (Option)

Q: What does Mazak M-code M293 do?

M293 — Work Rest 1 Clamp (Option) on the MAZATROL SmoothX control (INTEGREX e-670H). For single work rest (single base): This function code closes jaws of work rest 1. (Option) For double work rest (single base): This function code closes jaw 1 of work rest 1. (Option) For single work rest (double base): This function code closes jaws of work rest 1. (Option)

Q: Is M293 available on every INTEGREX e-670H?

M293 is an option — it is not fitted on every machine. Check your machine's specification before using it.

Machine-specific. This M-code list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). M-code assignments differ between Mazak models, control generations and PLC configurations — verify against the manual for your own machine before relying on any code.

What it does

For single work rest (single base): This function code closes jaws of work rest 1. (Option) For double work rest (single base): This function code closes jaw 1 of work rest 1. (Option) For single work rest (double base): This function code closes jaws of work rest 1. (Option)

Option: this function is not fitted on every machine — check your machine’s specification.

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 846. Reference and explanation only — not a reproduction of the manual.

Not sure how to use it? Ask the Mazatrol assistant →