What does Mazak M-code M333 do?

M333 — Turning Spindle (No. 2) Chuck Clamp Pressure LOW Select (Option) on the MAZATROL SmoothX control (INTEGREX e-670H). This function code changes the gripping pressure of the turning spindle (No. 2) chuck to a low pressure.

Does M333 apply to both turning spindles?

No — M333 is only for turning spindle No. 2 (the second turning spindle on the twin-spindle INTEGREX e-670H-S).

‹ALARMSMazatrol Assistant

M-CODEM function · MAZATROL SmoothX · spindle No. 2 only · option

M333

Turning Spindle (No. 2) Chuck Clamp Pressure LOW Select (Option)

Q: Is M333 available on every INTEGREX e-670H?

M333 is an option — it is not fitted on every machine. Check your machine's specification before using it.

Machine-specific. This M-code list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). M-code assignments differ between Mazak models, control generations and PLC configurations — verify against the manual for your own machine before relying on any code.

What it does

This function code changes the gripping pressure of the turning spindle (No. 2) chuck to a low pressure.

Twin-spindle note (*1): M333 applies only to turning spindle No. 2 — the second turning spindle on the e-670H-S.

Option: this function is not fitted on every machine — check your machine’s specification.

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 847. Reference and explanation only — not a reproduction of the manual.

Not sure how to use it? Ask the Mazatrol assistant →