Does M358 apply to both turning spindles?

No — M358 is only for turning spindle No. 2 (the second turning spindle on the twin-spindle INTEGREX e-670H-S).

M-CODEM function · MAZATROL SmoothX · spindle No. 2 only

M358

Turning Spindle No. 2 Air Blast ON

Q: What does Mazak M-code M358 do?

M358 — Turning Spindle No. 2 Air Blast ON on the MAZATROL SmoothX control (INTEGREX e-670H). This function code activates turning spindle No. 2 air blasting. At this time, the turning spindle No. 2 rotates min–1. at about 50 Air blasting stops after the elapse of the timer-set time. Timer setting: PLC parameter TIM76.

Machine-specific. This M-code list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). M-code assignments differ between Mazak models, control generations and PLC configurations — verify against the manual for your own machine before relying on any code.

What it does

This function code activates turning spindle No. 2 air blasting. At this time, the turning spindle No. 2 rotates min–1. at about 50 Air blasting stops after the elapse of the timer-set time. Timer setting: PLC parameter TIM76.

Twin-spindle note (*1): M358 applies only to turning spindle No. 2 — the second turning spindle on the e-670H-S.

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 847. Reference and explanation only — not a reproduction of the manual.

Not sure how to use it? Ask the Mazatrol assistant →