What does Mazak M-code M371 do?

M371 — Turning Spindle No. 2 Spindle-Through Air Blast OFF (Option) on the MAZATROL SmoothX control (INTEGREX e-670H). This function code stops turning spindle-through air blasting on turning spindle No. 2 side.

Does M371 apply to both turning spindles?

No — M371 is only for turning spindle No. 2 (the second turning spindle on the twin-spindle INTEGREX e-670H-S).

‹ALARMSMazatrol Assistant

M-CODEM function · MAZATROL SmoothX · spindle No. 2 only · option

M371

Turning Spindle No. 2 Spindle-Through Air Blast OFF (Option)

Q: Is M371 available on every INTEGREX e-670H?

M371 is an option — it is not fitted on every machine. Check your machine's specification before using it.

Machine-specific. This M-code list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). M-code assignments differ between Mazak models, control generations and PLC configurations — verify against the manual for your own machine before relying on any code.

What it does

This function code stops turning spindle-through air blasting on turning spindle No. 2 side.

Twin-spindle note (*1): M371 applies only to turning spindle No. 2 — the second turning spindle on the e-670H-S.

Option: this function is not fitted on every machine — check your machine’s specification.

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 847. Reference and explanation only — not a reproduction of the manual.

Not sure how to use it? Ask the Mazatrol assistant →