What does Mazak M-code M373 do?

M373 — Turning Spindle (No. 2) Chuck, OD Chucking Selection on the MAZATROL SmoothX control (INTEGREX e-670H). This function code sets the chucking direction of the turning spindle (No. 2) to OD chucking.

Does M373 apply to both turning spindles?

No — M373 is only for turning spindle No. 2 (the second turning spindle on the twin-spindle INTEGREX e-670H-S).

‹ALARMSMazatrol Assistant

M-CODEM function · MAZATROL SmoothX · spindle No. 2 only

M373

Turning Spindle (No. 2) Chuck, OD Chucking Selection

Machine-specific. This M-code list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). M-code assignments differ between Mazak models, control generations and PLC configurations — verify against the manual for your own machine before relying on any code.

What it does

This function code sets the chucking direction of the turning spindle (No. 2) to OD chucking.

Twin-spindle note (*1): M373 applies only to turning spindle No. 2 — the second turning spindle on the e-670H-S.

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 847. Reference and explanation only — not a reproduction of the manual.

Not sure how to use it? Ask the Mazatrol assistant →