Grinder Mode ON (Option)

Q: What does Mazak M-code M610 do?

M610 — Grinder Mode ON (Option) on the MAZATROL SmoothX control (INTEGREX e-670H). This function code rotates the turning spindle and the milling spindle at the same time and makes grinder machining function mode valid. At this time, however, the operation of the two spindles is not synchronized.

Q: Is M610 available on every INTEGREX e-670H?

M610 is an option — it is not fitted on every machine. Check your machine's specification before using it.

Machine-specific. This M-code list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). M-code assignments differ between Mazak models, control generations and PLC configurations — verify against the manual for your own machine before relying on any code.

What it does

This function code rotates the turning spindle and the milling spindle at the same time and makes grinder machining function mode valid. At this time, however, the operation of the two spindles is not synchronized.

Option: this function is not fitted on every machine — check your machine’s specification.

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 848. Reference and explanation only — not a reproduction of the manual.

Not sure how to use it? Ask the Mazatrol assistant →