What is the setting range of Mazak parameter BA102?

±99999999 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: Immediate.

PARAMMachine parameter · BARRIER (BA)

BA102

Tool nose measurement, Z-coordinate of the sensor’s reference point (for lower turret/HD2)

Q: What does Mazak parameter BA102 do?

BA102 is a Machine parameter in the BARRIER group of the MAZATROL SmoothX control (INTEGREX e-670H). BA95: Sensor width along the X-axis BA96: Sensor width along the Z-axis BA97: X-coordinate of the sensor’s reference point BA99: Z-coordinate of the sensor’s reference point BA103: Sensor width along the X-axis (for lower turret/HD2) BA104: Sensor width along the Z-axis (for lower turret/HD2) BA100: X-coordinate of the sensor’s reference point (for lower turret/HD2) BA102: Z-coordinate of the sensor’s reference point (for lower turret/HD2). Use BA95 and BA96 to set the dimensions of the sensor for tool nose measurement. BA97 and BA99 are provided to set in machine coordinates the reference point of the sensor (see the diagram below). Example : 1. For horizontal type BA95 2. For vertical type BA99

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

BA95: Sensor width along the X-axis BA96: Sensor width along the Z-axis BA97: X-coordinate of the sensor’s reference point BA99: Z-coordinate of the sensor’s reference point BA103: Sensor width along the X-axis (for lower turret/HD2) BA104: Sensor width along the Z-axis (for lower turret/HD2) BA100: X-coordinate of the sensor’s reference point (for lower turret/HD2) BA102: Z-coordinate of the sensor’s reference point (for lower turret/HD2)

Use BA95 and BA96 to set the dimensions of the sensor for tool nose measurement. BA97 and BA99 are provided to set in machine coordinates the reference point of the sensor (see the diagram below). Example : 1. For horizontal type BA95 2. For vertical type BA99

Setting

Setting range±99999999

Unit0.0001 mm/0.00001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 93, 592. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →