ALARMSparameter list

Every SmoothX
parameter.

1,427 parameter addresses from the Mazak manual, in the control’s own groups. Tap an address for its meaning, setting range, unit and when a change takes effect.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
1427 of 1427 parameters

User parameters

DISPLAY STRUCTURE (US) · 10

  1. US1DISPLAY STRUCTURE bit settings (7 bits)7 BITS
  2. US37Data guard function: Maximum number of users
  3. US39Automatic determination of cutting conditions Element that automatically determines “FR” (DRILL)
  4. US40Automatic determination of cutting conditions Element that automatically determines “FR” (BOR BAR, B-B BAR and BCK FACE)
  5. US41Automatic determination of cutting conditions Element that automatically determines “FR” (FCE MILL, END MILL)
  6. US42Automatic determination of cutting conditions Reference shank diameter (BAR, CPY, CORNER)
  7. US43Automatic determination of cutting conditions Tool nose radius when tool data is not input (BAR, CPY, CORNER and FACING)
  8. US44Automatic determination of cutting conditions Tool width when tool data is not input (BAR, CPY and CORNER)
  9. US45Automatic determination of cutting conditions Tool nose angle when tool data is not input (BAR, CPY, CORNER and FACING)
  10. US46Automatic determination of cutting conditions Tool nose width when tool data is not input (T.GROOVE)

EIA/ISO (F) · 157

  1. F1G61.1 corner deceleration coefficient (%)
  2. F2G61.1 arc-clamping speed coefficient (%)
  3. F3For high-speed smoothing control
  4. F4Distance to judge the shape formed by 3 axes under tool tip point control in the 5-axis fairing function
  5. F5Distance to judge the shape formed by rotary 2 axes in the 5-axis fairing function
  6. F6Minimum allowable height of stepped sections for deceleration in high-speed smoothing control mode
  7. F7Fixed value (0)
  8. F8Corner deceleration speed coefficient for high-speed smoothing control
  9. F9Circular cutting clamp speed coefficient for high-speed smoothing control
  10. F10Return amount during tap high-speed deep-hole cycle
  11. F11Vector constant for 3-D, tool-diameter compensation
  12. F12Return amount of pecking in drill high-speed deep-hole cycle or in G73
  13. F13Allowance amount of rapid-feed stop in deep-hole drilling cycle or in G83/G283
  14. F14Rotation center of coordinates (axis of abscissa)
  15. F15Rotation center of coordinates (axis of ordinate)
  16. F16Horizontal length of coordinate rotation
  17. F17Vertical length of coordinate rotation
  18. F18Angle of coordinate rotation
  19. F19Maximum permissible difference in arc radius
  20. F20Fixed value of scaling factor
  21. F21Maximum inside-corner angle available with automatic corner override (G62)
  22. F22Deceleration area of automatic corner overriding (G62)
  23. F27Handling of G92 (spindle speed clamp value) command at restart
  24. F28Threading chamfering angle
  25. F29Override value of automatic corner overriding (G62)
  26. F30G-code type selection
  27. F31Select a roughing priority type for program layout
  28. F32Operation when argument R is omitted from the maximum/minimum spindle speed setting
  29. F33EIA/ISO bit settings (7 bits)7 BITS
  30. F34EIA/ISO bit settings (8 bits)8 BITS
  31. F35EIA/ISO bit settings (7 bits)7 BITS
  32. F36EIA/ISO bit settings (8 bits)8 BITS
  33. F37EIA/ISO bit settings (7 bits)7 BITS
  34. F38EIA/ISO bit settings (6 bits)6 BITS
  35. F39Plane to be used for an EIA/ISO program (called by a subprogram unit) and a manual program unit
  36. F40Operating method selection in tape mode
  37. F41Threading termination waiting time processing
  38. F42Deceleration area r during Z-axis measurement
  39. F43Measurement area d during Z-axis measurement
  40. F44Measuring speed f
  41. F47-F66Common variable name
  42. F68EIA/ISO bit settings (2 bits)2 BITS
  43. F69EIA/ISO program restart method
  44. F70Availability of multiple-machining and designated number of repetitions in the EIA/ISO subprogram
  45. F71Machining order control
  46. F72Selection of the shape correction function of the MAZATROL program
  47. F73M-code execution time for time study
  48. F74S-code execution time for time study
  49. F75T-code execution time for time study
  50. F76B-code execution time for time study
  51. F77Basis rate for tool life judgment
  52. F78Selection of separating ratio of graphic display
  53. F79EIA/ISO bit settings (8 bits)8 BITS
  54. F80EIA/ISO bit settings (8 bits)8 BITS
  55. F81EIA/ISO bit settings (7 bits)7 BITS
  56. F82EIA/ISO bit settings (8 bits)8 BITS
  57. F83EIA/ISO bit settings (8 bits)8 BITS
  58. F84EIA/ISO bit settings (8 bits)8 BITS
  59. F85EIA/ISO bit settings (8 bits)8 BITS
  60. F86EIA/ISO bit settings (7 bits)7 BITS
  61. F87EIA/ISO bit settings (8 bits)8 BITS
  62. F88F88
  63. F89EIA/ISO bit settings (8 bits)8 BITS
  64. F91EIA/ISO bit settings (8 bits)8 BITS
  65. F92EIA/ISO bit settings (8 bits)8 BITS
  66. F93EIA/ISO bit settings (8 bits)8 BITS
  67. F94EIA/ISO bit settings (8 bits)8 BITS
  68. F95EIA/ISO bit settings (8 bits)8 BITS
  69. F96EIA/ISO bit settings (7 bits)7 BITS
  70. F97Selection of G-code of the coordinates system to be used in the EIA conversion function
  71. F98Number of macro variable to be used in the EIA conversion function
  72. F99Offset amount for the subprogram WNo. to the main WNo. concerned in case of output with subprogram in the EIA conversion function
  73. F100Spline cancel length
  74. F101Spline cancel angle
  75. F102Fine spline interpolation curve error (Block including the point of inflection)
  76. F103Spline interpolation fairing block length, 5-axis spline interpolation small block length
  77. F104Fine spline interpolation curve error (block including no inflection point), 5-axis spline interpolation curve error, 5-axis fairing command error
  78. F107Small block judgment length
  79. F108Corner deceleration angle increment value
  80. F109Number of common variables between turrets (#100 onward)
  81. F110Number of common variables between turrets (#500 onward)
  82. F111EIA/ISO bit settings (6 bits)6 BITS
  83. F112Selection of measurement data items to be printed out
  84. F113EIA/ISO bit settings (8 bits)8 BITS
  85. F114EIA/ISO bit settings (8 bits)8 BITS
  86. F116Feed rate of the threading runout — X-axis
  87. F117Feed rate of the threading runout — Y-axis
  88. F118Feed rate of the threading runout — Z-axis
  89. F119Runout feed rate for the inside diameter threading cycle
  90. F120Clamping speed for the threading cycle — X-axis
  91. F121Clamping speed for the threading cycle — Y-axis
  92. F122Clamping speed for the threading cycle — Z-axis
  93. F123EIA/ISO bit settings (5 bits)5 BITS
  94. F124Permissible data alteration amount 1 for input error prevention function
  95. F125Permissible data alteration amount 2 for input error prevention function
  96. F126Maximum wear offset setting with the input error prevention function enabled
  97. F1285-axis spline interpolation angular error, 5-axis fairing angular error
  98. F1295-axis spline interpolation corner deceleration coefficient
  99. F1305-axis spline interpolation arc-clamping speed coefficient
  100. F135Tool-drawing accuracy on the VIRTUAL MACHINING or 3D MONITOR display
  101. F136Amount of offset for dummy workpiece shape on the VIRTUAL MACHINING or 3D MONITOR display
  102. F137Number of jaws indicated on the VIRTUAL MACHINING or 3D MONITOR display for No. 1 turning spindle
  103. F138Number of jaws indicated on the VIRTUAL MACHINING or 3D MONITOR display for No. 2 turning spindle
  104. F139Angle offset for the jaws indicated on the VIRTUAL MACHINING or 3D MONITOR display for the No. 1 turning spindle
  105. F140Angle offset for the jaws indicated on the VIRTUAL MACHINING or 3D MONITOR display for the No. 2 turning spindle
  106. F142Background color of spindle override window displayed when the external override function is used
  107. F143EIA/ISO bit settings (7 bits)7 BITS
  108. F144EIA/ISO bit settings (6 bits)6 BITS
  109. F145Rapid feed override when data alteration is detected
  110. F146Selection of the material model’s part to be taken off (hidden) on the VIRTUAL MACHINING and 3D MONITOR displays in the flow of turning operation under synchronization of both spindles
  111. F148Compensation amount for G41/G42 given in a manual program (MANL PRG) unit
  112. F149Operation between blocks when single block mode is switched from ON to OFF during automatic operation
  113. F150Output data offset of NC basic information for field network
  114. F151EIA/ISO bit settings (6 bits)6 BITS
  115. F152Fixed value (0)
  116. F153SMART font display, valid/invalid
  117. F154Parameter for system internal setting Setting prohibited
  118. F155EIA/ISO bit settings (4 bits)4 BITS
  119. F156EIA/ISO bit settings (8 bits)8 BITS
  120. F157EIA/ISO bit settings (8 bits)8 BITS
  121. F158EIA/ISO bit settings (8 bits)8 BITS
  122. F159EIA/ISO bit settings (8 bits)8 BITS
  123. F160EIA/ISO bit settings (7 bits)7 BITS
  124. F161EIA/ISO bit settings (7 bits)7 BITS
  125. F162EIA/ISO bit settings (8 bits)8 BITS
  126. F163EIA/ISO bit settings (7 bits)7 BITS
  127. F164EIA/ISO bit settings (6 bits)6 BITS
  128. F165EIA/ISO bit settings (7 bits)7 BITS
  129. F166EIA/ISO bit settings (7 bits)7 BITS
  130. F167EIA/ISO bit settings (8 bits)8 BITS
  131. F168EIA/ISO bit settings (7 bits)7 BITS
  132. F169EIA/ISO bit settings (6 bits)6 BITS
  133. F170EIA/ISO bit settings (3 bits)3 BITS
  134. F241Operation when address P is omitted in G297/G298 command
  135. F242Threshold for the travel ratio between the tool tip point and machine end point for time study
  136. F268Corner rounding in the cutting point command mode
  137. F269Fixed value (1)
  138. F270Smooth corner control function: Setting width
  139. F271Smooth corner control function: Arc cutting clamp speed coefficient
  140. F272Smooth corner control function: Arc cutting clamp speed coefficient for high-speed smooth control
  141. F273Smooth corner control function: Cancellation angle
  142. F274Cutting feedrate override rate in the tool axial direction for the EIA/ISO engraving function
  143. F275Character depth for the EIA/ISO engraving function
  144. F276Character height for the EIA/ISO engraving function
  145. F277Retraction height for the EIA/ISO engraving function
  146. F300INTELLIGENT SAFETY SHIELD: Cutting accuracy
  147. F301INTELLIGENT SAFETY SHIELD: Tool path accuracy for collision check processing
  148. F302Allowance in rapid feed stop in deep-hole boring cycle
  149. F303G01 feed-in speed for deep-hole boring cycle M, E
  150. F304Alarm wait time during [CUT] restarting search during VIRTUAL MACHINING
  151. F326Automatic operation intelligent safety shield (ISS)/virtual machining interference check selection
  152. F328Real time tuning II Number of buffers for calculating the average of optimum time constants
  153. F329EIA/ISO bit settings (4 bits)4 BITS
  154. F330EIA/ISO bit settings (4 bits)4 BITS
  155. F331EIA/ISO bit settings (6 bits)6 BITS
  156. F335EIA/ISO bit settings (4 bits)4 BITS
  157. F336EIA/ISO bit settings (5 bits)5 BITS

LINE/FACE/3D (E) · 91

  1. E1Closed-pattern cutting start point and escape point setting element
  2. E2Cutting start point and escape point setting element (the first clearance)
  3. E4Reference allowance of finishing in radial direction
  4. E5Element used to set the cutting start point and escape point (the second clearance)
  5. E6Reference allowance of finishing in axial direction
  6. E7Allowance of cutting start point in axial direction (the second clearance)
  7. E8Radial interference clearance of chamfering cutter
  8. E9Allowance of axial-cutting start position (the first clearance)
  9. E10Depth-of-cut-R automatic setting element (Face milling, End milling-top, End milling-step)
  10. E11Axial interference clearance of chamfering cutter
  11. E12Radial interference clearance of face milling unit and angular face milling unit
  12. E13Tool path setting element for end milling-top unit
  13. E14Depth-of-cut-R automatic setting element (Pocket milling, Pocket milling-mountain, Pocket milling-valley)
  14. E15Tool path setting element for face milling-top unit (reciprocating short)
  15. E16Peripheral-cutting feed rate override for end milling-mountain unit
  16. E17Axial-cutting feed rate override
  17. E18Override in case of the overall width cutting for pocket-machining
  18. E19Returning feed rate override in case of bidirectional cutting for rough-machining of the end milling-slot unit.
  19. E20Axial cutting feed override during Z-axial cutting in the pecking mode of face machining
  20. E21Wall-cutting overlap in closed figure
  21. E22Override value of automatic corner over-riding
  22. E23Effective removal allowance (upper limit) of automatic corner overriding
  23. E24Effective removal allowance (lower limit) of automatic corner overriding
  24. E25Effective angle (upper limit) of automatic corner overriding
  25. E26Calculation coefficient for the finishing feed of line milling
  26. E27Radial direction feed rate calculation reference diameter for finish cutting in line machining unit
  27. E28Finishing feed rate calculation reference feed rate in line machining unit
  28. E29Selection of whether the cutting conditions in the shape sequence during VFC mode are to be modified
  29. E30An element that determines the starting point and escape point of radial cutting when CLOSED is specified for the wall attributes at the starting point and ending point of open-pattern line machining
  30. E31Element that determines the amount of OPEN attribute wall protrusion in pocket-machining shape units
  31. E32Element used for automatically determining the approach radius in a Z-direction helical approach
  32. E33Element used for automatically determining the amount of in-feed per revolution in the Z-axis direction in a Z-direction helical approach
  33. E34Element that automatically determines an approaching distance in a Z-direction tapered approach scheme
  34. E35Approaching gradient for a Z-direction tapered approach scheme
  35. E36Element that automatically determines an escape distance in the Z-direction tapered escape scheme
  36. E37The amount of return of pecking in the Z-axial pecking mode of face machining
  37. E38The returning feed rate of pecking in the Z-axial pecking mode of face machining
  38. E39Element that automatically determines the depth-of-cut-R (Pocket milling, Pocket milling-mountain, Pocket milling-valley, End milling-slot)
  39. E40Element used for automatically determining the approach radius in a Z-direction helical approach (helical 2)
  40. E41Element used for automatically determining the amount of in-feed per revolution in the Z-axis direction in a Z-direction helical approach (helical 2)
  41. E43Magnification factor of surface speed in helical approach
  42. E553-D Axial cutting-feed overriding
  43. E563-D, Inversion check of curved-surface pattern
  44. E573-D, Severity check of cutting pitch
  45. E583-D, Tool-diameter compensation
  46. E593-D, Allowance of axial-cutting start position
  47. E603-D, Normal cutting allowance
  48. E613-D, Search length for parallel cutting
  49. E623-D, Search length for right-angle cutting
  50. E633-D, Pattern display division segment (FL direction)
  51. E643-D, Pattern display division segment (GL direction)
  52. E653-D, Radial cutting allowance for area check
  53. E663-D, Axial cutting allowance for area check
  54. E67-E753-D, Processing error tolerance
  55. E763-D, Entire-width override
  56. E773-D, Radial cutting allowance for high-speed rough processing (workpiece size appointment)
  57. E783-D, Multiplying factor set for tolerance
  58. E833-D, Region of radial machining during high-speed rough processing (offset appointment)
  59. E843-D, Region of axial machining during high-speed rough processing (offset appointment)
  60. E853-D, Region of radial machining during high-speed rough processing: –X (workpiece size appointment)
  61. E863-D, Region of radial machining during high-speed rough processing: +X (workpiece size appointment)
  62. E873-D, Region of radial machining during high-speed rough processing: –Y (workpiece size appointment)
  63. E883-D, Region of radial machining during high-speed rough processing: +Y (workpiece size appointment)
  64. E893-D, Region of axial machining during high-speed rough processing (workpiece size appointment)
  65. E91Tool-path pattern selection for end milling-mountain unit
  66. E92Tool-path pattern selection for pocket milling unit
  67. E93Tool-path pattern selection for pocket milling-mountain unit
  68. E94Tool-path pattern selection for pocket milling-valley unit
  69. E95Tool-path pattern selection for line-machining unit
  70. E96LINE/FACE/3D bit settings (5 bits)5 BITS
  71. E97Tool-path pattern selection for end milling-top unit
  72. E98Cutting method selection for end milling-mountain, pocket milling-valley unit
  73. E99LINE/FACE/3D bit settings (6 bits)6 BITS
  74. E104LINE/FACE/3D bit settings (8 bits)8 BITS
  75. E105LINE/FACE/3D bit settings (8 bits)8 BITS
  76. E106LINE/FACE/3D bit settings (2 bits)2 BITS
  77. E108LINE/FACE/3D bit settings (4 bits)4 BITS
  78. E109Allowable limits of engage angle in intelligent pocket milling (IPM) machining
  79. E110Maximum radius of arc inserted for intelligent pocket milling (IPM) machining
  80. E111Element that determines the tool paths in intelligent pocket milling (IPM) machining (Pocket milling-valley)
  81. E112Maximum wall avoidance distance in intelligent pocket milling (IPM) machining
  82. E113Bottom face avoidance distance/clearance for recovering surface speed in plane machining
  83. E115Magnification factor of the minimum arc of trochoid cycle in intelligent pocket milling (IPM) machining
  84. E116Feedrate override for non-cutting feed in intelligent pocket milling (IPM) machining
  85. E129Amount of overlapping in groove expanding operation in the end milling-slot unit
  86. E130Smooth chamfering (end milling slot): tolerance between the interpolated line segments and the ideal curve
  87. E131Element that automatically determines depth-of-cut-R (line machining)
  88. E132Radial interference clearance of round bar face milling unit
  89. E133Surface speed change position in helical approach
  90. E134Clearance in the tool axial direction in engraving units
  91. E141LINE/FACE/3D bit settings (6 bits)6 BITS

POINT (D) · 81

  1. D1Height of the second R-point during point machining
  2. D2Nominal diameter of spot-machining tool
  3. D3Number of revolutions during dwell at hole bottom in spot-machining cycle
  4. D4Maximum allowable spot-chamfering hole diameter element
  5. D5Prehole through speed during inversed spot-facing
  6. D6Drill-machining cycle setting element
  7. D7Drill-machining cycle setting element
  8. D8Maximum diameter of holes machinable on one drill
  9. D9Maximum diameter of holes machinable on two drills
  10. D10Maximum diameter of holes machinable on three drills
  11. D11Through-hole/tap-prehole machining overshoot
  12. D12Stop-hole machining hole-bottom clearance
  13. D13Spot-machining hole diameter (fixed value)
  14. D14Depth-of-cut setting element for drilling (ALMINUM)
  15. D15Depth-of-cut setting element for drilling (except AL)
  16. D16Number of revolutions during dwell at hole bottom for chamfering cutter or spot-machining tool in chamfering cycle
  17. D17Interference clearance of chamfering cutter
  18. D18Return feed rate for reaming or boring (cycle 3)
  19. D19Number of revolutions during dwell at hole bottom for end milling
  20. D20Radial depth-of-cut setting element for end milling
  21. D21Reference bottom-finishing allowance for end milling
  22. D22Tapping-cycle dwell time
  23. D23Prehole clearance for end milling
  24. D24Number of revolutions during dwell at hole bottom for boring
  25. D25Boring-bar tip relief
  26. D26Returning distance from hole bottom for boring or back-boring
  27. D28Bottom-finishing amount of boring
  28. D29Chip removal time
  29. D30Number of incomplete threads in tapping cycle
  30. D31Tapper elongation amount for tapping
  31. D32Number of spindle revolutions until spindle CCW rotation begins in tapping cycle
  32. D33Back-boring tool tip relief
  33. D35Prehole-drilling diameter setting element for reamer (drilling)
  34. D36Prehole-drilling diameter setting element for reamer (boring)
  35. D37Prehole-drilling diameter setting element for reamer (end milling)
  36. D38Reamer-prehole diameter setting element for boring or end milling
  37. D39Reamer-prehole diameter setting element for end milling
  38. D40Number of revolutions during dwell at spot-faced hole bottom for inversed spot-facing
  39. D41R-point height during point-machining
  40. D42Height of the third R-point during point machining
  41. D43Number of incomplete threads in tapping cycle for piped screw
  42. D44Selecting an automatic calculation method for the amount of chamfer with the tapping unit
  43. D45Gradual decrements in drilling depth
  44. D46Minimum gradual drilling depth
  45. D47Reamer-prehole machining overshoot
  46. D48Feed override for the section to be chamfered in the planetary tapping cycle
  47. D49Amount of return at hole bottom during the planetary tapping cycle
  48. D50Auto-set feed rate for pre-hole machining in the planetary tapping cycle
  49. D51Auto-set feed rate for planetary tapping cycle
  50. D52Reduction ratio for the G00-based relief rate during a very-deep-hole drilling cycle
  51. D53Number of times of pecking up to the return of the tool to a position near the starting point of the very-deep-hole drilling cycle of a drilling or turning-drilling unit
  52. D54Deceleration rate at cutting start for very-deep-hole drilling cycle/decremental very-deep-hole machining cycle
  53. D55Drilling return distance for very-deep-hole drilling cycle/decremental very-deep-hole machining cycle
  54. D56Number of revolutions during dwell at chip ejection position and hole bottom for very-deep-hole drilling cycle/decremental very-deep-hole machining cycle
  55. D57Return speed for very-deep-hole drilling cycle/decremental very-deep-hole machining cycle
  56. D58Feed rate reduction distance ratio at cutting start of a very-deep-hole drilling cycle/decremental very-deep-hole machining cycle
  57. D59Surface speed reduction ratio at cutting end of a very-deep-hole drilling cycle/decremental very-deep-hole machining cycle
  58. D60Automatic setting ratio of axial cutting feed rate during chamfering
  59. D61Nominal diameter of chamfering cutter, set during automatic tool development for a point machining unit
  60. D62Maximum number of times automatic pecking is to be performed by MAZATROL programs
  61. D63Smooth chamfering (point machining): overlap amount
  62. D64Smooth chamfering (point machining): tolerance between the interpolated line segment and the ideal curve
  63. D66Reduction ratio for the G00 feed rate from the chip ejection position to the return position during a deep-hole drilling/very-deep-hole drilling cycle
  64. D73-D77Learning of cutting conditions (DEP-Z range)
  65. D78-D82Learning of cutting conditions (WID-R range)
  66. D91POINT bit settings (8 bits)8 BITS
  67. D92POINT bit settings (8 bits)8 BITS
  68. D93Unidirectional positioning for point-machining
  69. D94Unidirectional positioning for point-machining
  70. D95Auto-setting method for tapping
  71. D96POINT bit settings (8 bits)8 BITS
  72. D97POINT bit settings (1 bit)1 BITS
  73. D98POINT bit settings (2 bits)2 BITS
  74. D100POINT bit settings (1 bit)1 BITS
  75. D105POINT bit settings (2 bits)2 BITS
  76. D106POINT bit settings (8 bits)8 BITS
  77. D107POINT bit settings (4 bits)4 BITS
  78. D130Chip ejection distance in deep-hole drilling cycle
  79. D131G00 feed-in speed override for deep-hole boring cycle
  80. D141POINT bit settings (3 bits)3 BITS
  81. D143POINT bit settings (1 bit)1 BITS

SOFT LIMIT (I) · 16

  1. I1Shift amount of unidirectional positioning (G60)
  2. I2Upper (plus direction) user soft-limit
  3. I3Lower (minus direction) user soft-limit
  4. I5Function for making the G0 speed variable, Variable override: Minimum value
  5. I7Function for making the G0 speed variable, Variable control area (lower limit side)
  6. I8Function for making the G0 speed variable, Variable control area (upper limit side)
  7. I9Function for making the G0 speed variable, Variable control area lower limit
  8. I10Function for making the G0 speed variable, Variable control area upper limit
  9. I11Rotary center of a workpiece
  10. I12Clamping value for the amount of handle interruption
  11. I13SOFT LIMIT bit settings (4 bits)4 BITS
  12. I14SOFT LIMIT bit settings (8 bits)8 BITS
  13. I17Amount of work hand rotational error correction (Work hand angle: 0°)
  14. I18Amount of work hand rotational error correction (Work hand angle: 45°)
  15. I19Amount of work hand rotational error correction (Work hand angle: 90°)
  16. I21Fixed point 1 specified by the user

SOLID (SD) · 20

  1. SD49Machine coordinate selection
  2. SD50Table type
  3. SD51Round table axis direction
  4. SD53Smoothness selection for arcs in the tool path check/shape check
  5. SD58QUICK MAZATROL product shape display accuracy
  6. SD59-SD63Fixed value
  7. SD97Distance of the model movement per time
  8. SD98Amount of model rotation per time
  9. SD125Minimum table dimension X
  10. SD125-SD130Table size SD125: Minimum table dimension X SD126: Maximum table dimension X SD127: Minimum table dimension Y SD128: Maximum table dimension Y SD129: Minimum table dimension Z SD130: Maximum table dimension Z
  11. SD126Maximum table dimension X
  12. SD127Minimum table dimension Y
  13. SD128Maximum table dimension Y
  14. SD129Minimum table dimension Z
  15. SD130Maximum table dimension Z
  16. SD131Amount of table chamfer
  17. SD159SOLID bit settings (1 bit)1 BITS
  18. SD165SOLID bit settings (1 bit)1 BITS
  19. SD166SOLID bit settings (1 bit)1 BITS
  20. SD167SOLID bit settings (2 bits)2 BITS

SYSTEM (SU) · 73

  1. SU1Axis setting I for plane selection
  2. SU2Axis setting I for plane selection
  3. SU3Axis setting I for plane selection
  4. SU4Axis setting J for plane selection
  5. SU5Axis setting J for plane selection
  6. SU6Axis setting J for plane selection
  7. SU7Axis setting K for plane selection
  8. SU8Axis setting K for plane selection
  9. SU9Axis setting K for plane selection
  10. SU10Selection of tool change command output position
  11. SU11Movement of axes during approach
  12. SU12Rotating position specified in the indexing unit after tool change
  13. SU13Axis name of the transfer axis
  14. SU14Tool nose mark display color on the TOOL PATH CHECK display/TRACE display
  15. SU15Name of thrust axis for servo axis
  16. SU16Movement to C-axis index swivel position when Z-offset scheme is used
  17. SU17Background color for the MDI window
  18. SU18Character color for the MDI window
  19. SU19Selecting the method of axis movement to the tool change command output position or to the position designated at RETURN of the end unit
  20. SU20Coefficient for polygonal machining spindle acceleration
  21. SU21Selection of returning operation after the execution of the workpiece transfer unit corresponding to the work hand angle to be changed
  22. SU22Method of axis movement from the initial point or the escape TPC relay point to the rotating position in the indexing unit
  23. SU23Cutting feed rate reduction rate in composite-type fixed cycle
  24. SU24Spindle speed multiplication factor in the execution of a composite-type fixed cycle
  25. SU26Chopping axis selection
  26. SU29Specification of an axis (linear axis) on a plane during polar coordinate interpolation
  27. SU30Specification of an axis (rotary axis) on a plane during polar coordinate interpolation
  28. SU31Axis movement pattern to the return position set in the end unit of initial-point scheme program for multi-tasking machine
  29. SU49Delay timer for the parts catcher
  30. SU50Tool turning clearance (radial value) in X-axis
  31. SU51Tool turning clearance in Z-axis
  32. SU52Lower-turret retraction function - Tool number of the retraction tool 1
  33. SU53Lower-turret retraction function - Tool number of the retraction tool 2
  34. SU54Allowable limit of axis movement completion waiting time when a cross machining command is executed
  35. SU55Wait time for accessing the programs in the hard disk operation area/Ethernet operation area
  36. SU56For setting SPRINT interface (option), fixed value
  37. SU97- Lower-turret retraction function - Fixed point of the retraction position
  38. SU97-SU100Lower-turret retraction function Fixed point of the retraction position
  39. SU102Return distance at wall during rough cutting in bar machining or in corner machining of EIA/ISO program
  40. SU103Cutting depth in the composite-type fixed cycle
  41. SU104Pecking return distance in grooving of EIA/ISO program
  42. SU105Cut depth (diametral value) for final cut in composite-type thread cutting cycle of EIA/ISO program
  43. SU106Minimum cut depth clamping value (radial value) in composite-type thread cutting cycle G276 of EIA/ISO program
  44. SU107Safety clamp speed
  45. SU108Safeguarding strength
  46. SU109Tip mass
  47. SU110- Tool length setting range check function - settable data range
  48. SU110-SU113Tool length setting range check function Settable data range SU110 Max. tool length (+X-axis) SU111 Min. tool length (–X-axis) SU112 Max. tool length (+Z-axis) SU113 Min. tool length (–Z-axis)
  49. SU113
  50. SU122Lower turret width setting for barrier expansion by the difference in X-axis angle between the upper and lower turrets
  51. SU123Admissible motion range on the primary rotational axis for workpiece placement error correction
  52. SU124Admissible motion range on the secondary rotational axis for workpiece placement error correction
  53. SU125Fixed value
  54. SU126Amount of offset for runout of the B-axis center (BA61) (only for Maza-Check)
  55. SU127Amount of offset for B-axis - spindle nose distance offset (BA62)
  56. SU128Retraction position of the upper and lower turrets at the end of the two-workpiece machining sequence (X-axis)
  57. SU129Retraction position of the upper and lower turrets at the end of the two-workpiece machining sequence (Z-axis)
  58. SU130Chopping reference point
  59. SU131Chopping top dead point
  60. SU132Chopping bottom dead point
  61. SU133Chopping speed
  62. SU134Chopping clamp speed
  63. SU135Acceleration/deceleration time constant during chopping
  64. SU136Chopping compensation coefficient
  65. SU137Chopping tolerance
  66. SU153SYSTEM bit settings (8 bits)8 BITS
  67. SU154SYSTEM bit settings (8 bits)8 BITS
  68. SU155SYSTEM bit settings (6 bits)6 BITS
  69. SU156SYSTEM bit settings (5 bits)5 BITS
  70. SU157SYSTEM bit settings (7 bits)7 BITS
  71. SU158SYSTEM bit settings (7 bits)7 BITS
  72. SU159SYSTEM bit settings (1 bit)1 BITS
  73. SU161SYSTEM bit settings (1 bit)1 BITS

TURNING (TC) · 134

  1. TC1Cut depth reduction rate for rough cutting in bar machining unit, corner machining unit, and copy machining unit
  2. TC2Acceleration rate in up-going taper for rough cutting in bar machining unit
  3. TC3Acceleration rate in up-going wall slope (90°) for rough cutting in bar machining unit
  4. TC4Selection of chamfering pattern in rough external turning cycle G71 (G271) or rough edge-machining cycle G72 (G272)
  5. TC5Deceleration rate in down-going taper for rough cutting in bar machining unit
  6. TC6Deceleration rate in down-going wall slope (90°) for rough cutting in bar machining unit
  7. TC7Acceleration rate on outside stock contour for rough cutting in copy machining unit
  8. TC8Acceleration pitch error ratio in thread cutting unit
  9. TC9Rough cutting residue ratio in cutting off cycle in groove cutting unit
  10. TC10Cut depth allowable incremental rate for rough cutting in groove cutting unit, edge machining unit and copy machining unit
  11. TC11Deceleration rate at cutting start in turning-drilling unit
  12. TC12Deceleration rate at cutting end in turning-drilling unit
  13. TC13Deceleration rate at rough cutting start in bar machining unit and copy machining unit
  14. TC14Maximum permissible rate of increase of the initial cutting depth during roughing
  15. TC15Deceleration clearance at start of rough cutting in bar machining unit and copy machining unit
  16. TC16Tolerance for escape in high speed rough cutting cycle of bar machining unit
  17. TC17Pitch error correction during threading acceleration
  18. TC18Fixed value (0)
  19. TC19Turning-drilling cut depth calculation coefficient
  20. TC20Reamer return speed calculation coefficient in the turning-drilling unit
  21. TC21Incomplete threading portion length calculation coefficient for turning-tap tip
  22. TC22Turning-tapper elongation calculation coefficient
  23. TC23Thread height calculation coefficient for outside diameter, face/rear thread cutting (metric)
  24. TC24Thread height calculation coefficient for inside diameter thread cutting (metric)
  25. TC25Thread height calculation coefficient for outside diameter, face/rear thread cutting (inch)
  26. TC26Thread height calculation coefficient for inside diameter thread cutting (inch)
  27. TC27Recessing width for #1 to #3
  28. TC28Recessing depth #1 to #3
  29. TC29Recessing width for #4
  30. TC30Recessing depth for #4
  31. TC31Recessing width for #5
  32. TC32Recessing depth for #5
  33. TC33Recessing width for #6
  34. TC34Recessing depth for #6
  35. TC35Lower limit for thrust ratio
  36. TC37Safety contour clearance — Outside diameter clearance (radial value)
  37. TC38Safety contour clearance — Inside diameter clearance (radial value)
  38. TC39Safety contour clearance — Front clearance
  39. TC40Safety contour clearance — Back clearance
  40. TC41Thread cutting clearance (radial value)
  41. TC42Groove cutting clearance (radial value) in X-axis
  42. TC43Groove cutting clearance in Z-axis
  43. TC44Workpiece transfer clearance
  44. TC45Amount of the edge clearance after edge-machining
  45. TC46Drilling depth decrement in turning-drilling unit
  46. TC47Pecking return distance in turning-drilling unit
  47. TC48Drilling cut depth clamp value in turning-drilling unit
  48. TC49Spindle speed clamp value in cutting off cycle
  49. TC50Number of times that the feed rate is to be reduced during the #4 and #5 cutting-off cycles of a grooving unit
  50. TC51Dwell at the hole bottom during non-through hole drilling cycle of the turning-drilling unit
  51. TC52Dwell (specification of spindle rotation number) at groove bottom in groove cutting unit
  52. TC53Feed rate for escape by short distance
  53. TC54Cut depth per cycle for machining inside diameter in bar machining unit
  54. TC55Reverse feed tolerance for contour machining
  55. TC56Overtravelling in X-axis direction in edge machining unit
  56. TC57Workpiece pressing speed in workpiece transfer unit
  57. TC58Spindle speed of two spindles in workpiece transfer while the spindles are rotating in workpiece transfer unit
  58. TC59Workpiece pressing distance in workpiece transfer unit
  59. TC61Simultaneous operation pattern for transfer
  60. TC62Selection of tool change command output position for FLASH tool
  61. TC63Amount of relief after transfer using the workpiece transfer unit (Spindle mode 0 to 5)
  62. TC64Amount of relief after transfer using the workpiece transfer unit (Spindle mode 6 and 7)
  63. TC65Specification of first M-code for parts catcher control
  64. TC66Minimum index angle of the FLASH tool
  65. TC67Return distance (radial value) in X-axis at wall during rough cutting in bar cutting unit, in corner machining unit or in mill-turning unit of MAZATROL programs
  66. TC68Return distance in Z-axis at wall during rough cutting in bar cutting unit, in corner machining unit or in mill-turning unit of MAZATROL programs
  67. TC69Number of revolutions during dwell for pecking of grooving
  68. TC70FLASH tool — Number of cutting edges to be used for the tool not registered in the tool file
  69. TC71Feed stopping rotation dwell time during the chip cutting cycle
  70. TC72Number of times of roughing in the composite-type fixed cycle (G273, G73)
  71. TC73Return speed at pecking portion in groove cutting unit and turning-drilling unit
  72. TC74Pecking return distance in groove cutting unit of MAZATROL programs
  73. TC75Overlap distance for machining wide groove in groove cutting unit
  74. TC76Escape value after machining in edge machining unit
  75. TC77Acceleration distance clamp value for thread cutting unit
  76. TC78Cut depth (radial value) for final cut in thread cutting unit of MAZATROL programs
  77. TC79Minimum cut depth clamping value (radial value) in thread cutting unit of MAZATROL programs
  78. TC80Angle of the tool nose during the G276/G76 mode
  79. TC81Final finishing repeat times in the composite-type fixed cycle (G276, G76)
  80. TC82Chamfering data calculation coefficient in thread cutting unit and thread cutting cycle (G276/G292, G76/G92)
  81. TC83Number of cutting operations to be performed on finishing allowance corresponding to standard pattern (#0) of threading unit
  82. TC84Feed rate to be auto-set for finishing
  83. TC85-TC94Specification of the pocket for the long boring bar
  84. TC95Fixed value
  85. TC96Fixed value
  86. TC97Type of retraction during workpiece transfer
  87. TC98Returning operation after machining specified in the end unit
  88. TC99ATC operation after machining when not specified in the end unit
  89. TC101Selection of droop sampling axis
  90. TC102Selection of cycle counter sampling axis
  91. TC103Amplitude limit of table vibration
  92. TC104Clearance for rechucking using the workpiece transfer unit
  93. TC105Fixed value (0)
  94. TC106Designation of MOVE C in a workpiece transfer unit of a program of workpiece scheme (only for the INTEGREX e-H Series)
  95. TC107Overshoot in the longitudinal direction with the workpiece for inside machining
  96. TC108End position of the two-workpiece machining
  97. TC109Reference length for the display of bar materials on the BL SCHEDULE display
  98. TC111- CUTTING CONDITON LEARN display — Workpiece length range
  99. TC111-TC113CUTTING CONDITON LEARN display — Workpiece length range
  100. TC113
  101. TC114- CUTTING CONDITON LEARN display — Max. workpiece outside diameter range
  102. TC114-TC116CUTTING CONDITON LEARN display — Max. workpiece outside diameter range
  103. TC116
  104. TC117Composite-type fixed cycle — G273 amount of X-axial release
  105. TC118Composite-type fixed cycle — G273 amount of Z-axial release
  106. TC120- Distance to the front end of the long boring bar
  107. TC120-TC137Distance to the front end of the long boring bar Distance center Shift stroke Z Long boring bar
  108. TC137
  109. TC141Use/disuse of acceleration in up-going slope during rough cutting cycle in bar machining unit7 BITS
  110. TC142TURNING bit settings (8 bits)8 BITS
  111. TC143Whether the end tool of the long boring bar can be changed
  112. TC144TURNING bit settings (8 bits)8 BITS
  113. TC145TURNING bit settings (7 bits)7 BITS
  114. TC146TURNING bit settings (8 bits)8 BITS
  115. TC147TURNING bit settings (7 bits)7 BITS
  116. TC148TURNING bit settings (4 bits)4 BITS
  117. TC149TURNING bit settings (5 bits)5 BITS
  118. TC150TURNING bit settings (4 bits)4 BITS
  119. TC151TURNING bit settings (1 bit)1 BITS
  120. TC155Cut depth per cycle for machining external diameter in bar machining unit
  121. TC156Tool load avoidance distance in reciprocating grooving operation (side wall)
  122. TC157INTELLIGENT BALANCE ANALYZER function (IBA): Angular offset
  123. TC158Feed rate override in reciprocating grooving operation
  124. TC159Tool load avoidance distance in reciprocating grooving operation (bottom)
  125. TC160- Retraction distance from wall in reciprocating grooving operation
  126. TC161Tool load avoidance distance in reciprocating grooving operation (bottom)
  127. TC162Wall clearance in uni-directional grooving
  128. TC251INTELLIGENT BALANCE ANALYZER function (IBA): Imbalance multiplication parameter
  129. TC252INTELLIGENT BALANCE ANALYZER function (IBA): Imbalance factor parameter
  130. TC253INTELLIGENT BALANCE ANALYZER function (IBA): Imbalance droop offset
  131. TC254INTELLIGENT BALANCE ANALYZER function (IBA): Imbalance rotary speed offset
  132. TC255Intelligent Balance Analyzer function (IBA): Imbalance slope parameter
  133. TC289TURNING bit settings (1 bit)1 BITS
  134. TC290TURNING bit settings (2 bits)2 BITS

Machine parameters

ANOTHER (S) · 44

  1. S3Feed forward gain for the MAZAK Precision Rapid Boring Tornado Option
  2. S4Feed forward gain
  3. S5Rotational center of the table
  4. S6Absolute position detection parameter
  5. S7Upper limit (on Z-axis) of machining range for table rotating machining 
  6. S8Feed-forward gain G00
  7. S10Axis of rotation of the tilting table
  8. S11Corner position of the tilting table
  9. S12Axis of rotation of the tilting table (Used for the automatic program origin calculation function)
  10. S13G00 in-position width
  11. S14G01 in-position width
  12. S15Fixed value
  13. S16Unbalanced axis torque offset
  14. S17Torque limit buffer reduction ratio 1
  15. S18Torque limit buffer reduction ratio 2
  16. S19Tool change completion position of the long boring bar end tool
  17. S20APC completion position
  18. S21Completion position of gantry robot operation
  19. S22Cutting feed clamping speed during tool tip point control
  20. S23Reference workpiece zero point
  21. S24Long milling tool ATC complete position
  22. S25Central position on the upper surface of the tilt table (VARIAXIS) Central position of table upper surface (other machining centers)
  23. S26Central position of tilt table rotation (VARIAXIS)
  24. S27Ram spindle offset amount
  25. S28Center of the workpiece to be directly mounted on the table of the machines equipped with an additional table
  26. S29Position of the work hand rotating axis in relation to the machine zero point
  27. S30Distance from the axis of rotation of the work hand to the reference position of the vice for the work hand
  28. S31Specification of the machine coordinates of the floating reference point
  29. S32Rapid traverse speed for the mode of tool tip point control
  30. S33Reference position X for the TEACH function, to be used for setting the LENGTH B item of an angular tool (For machines of five-surface machining by angular tools)
  31. S34Amount of offset for rotary head misalignment (only for Maza-Check)
  32. S35Rotational center of the second table
  33. S36Position of the center of the second additional table on the VIRTUAL MACHINING display
  34. S38Time-out period for releasing the emergency stop status during powering on
  35. S39Turning spindle number of the table control mechanism that features switching of servo C-axis and turning spindle
  36. S40Offset amount from the turning spindle 0position to the servo C-axis machine zero point
  37. S45ANOTHER bit settings (3 bits)3 BITS
  38. S49Rapid feed overlapping function: G0 in-position width
  39. S50Rapid feed overlapping function: G1 in-position width
  40. S51Distance to the small-diameter table
  41. S52Rapid feed overlap function G0 in-position width (for tool tip point control and cutting point command)
  42. S53Rapid feed overlap function G1 in-position width (for tool tip point control and cutting point command)
  43. S70Fixed value
  44. S71ANOTHER bit settings (1 bit)1 BITS

BARRIER (BA) · 123

  1. BA1Chuck outside diameter (for chuck barrier) — No. 1 turning spindle
  2. BA2Chuck width (for chuck barrier) — No. 1 turning spindle
  3. BA3Chuck inside diameter (for chuck barrier) — No. 1 turning spindle
  4. BA4EIA program workpiece outside diameter
  5. BA5Chuck outside diameter (for chuck barrier) — No. 2 turning spindle
  6. BA6Chuck width (for chuck barrier) — No. 2 turning spindle
  7. BA7Chuck inside diameter (for chuck barrier) — No. 2 turning spindle
  8. BA8Tail body outside diameter (for tail barrier)
  9. BA9Tail body length (for tail barrier)
  10. BA10Tail spindle outside diameter (for tail barrier)
  11. BA11Length with tail spindle at back end (for tail barrier)
  12. BA12Tail head outside diameter (for tail barrier)
  13. BA13Tail head length (for tail barrier)
  14. BA14Tail head taper angle (for tail barrier)
  15. BA15Tail head biting diameter (for tail barrier)
  16. BA16Tail barrier, tail extruding length
  17. BA16-BA18EIA tail barrier Tail dimensions
  18. BA17Tail barrier, workpiece length
  19. BA18Tail barrier, tail reversing position Z
  20. BA19Distance from the Z-axis machine zero point to the spindle edge — No. 1 turning spindle
  21. BA20Distance from the Z-axis machine zero point to the spindle edge — No. 2 turning spindle
  22. BA21Jaw number for EIA program barrier — No. 1 turning spindle
  23. BA22Jaw number for EIA program barrier — No. 2 turning spindle
  24. BA23Turret outside diameter (turret type tool post)
  25. BA24Turret width (turret type tool post)
  26. BA25Turret reference position X (turret type tool post)
  27. BA26Turret reference position Z (turret type tool post)
  28. BA27Tool holder mounting position — Type 1
  29. BA28Tool holder width in X-axis direction — Type 1
  30. BA29Tool holder width in Z-axis direction — Type 1
  31. BA30Tool holder mounting position — Type 2
  32. BA31Tool holder width in X-axis direction — Type 2
  33. BA32Tool holder width in Z-axis direction — Type 2
  34. BA33Tool holder mounting position — Type 3
  35. BA34Tool holder width in X-axis direction — Type 3
  36. BA35Tool holder width in Z-axis direction BA29 - Type 1 BA32 - Type 2 BA35 - Type 3 BA38 - Type 4
  37. BA36Tool holder mounting position — Type 4
  38. BA37Tool holder width in X-axis direction — Type 4
  39. BA38Tool holder width in Z-axis direction — Type 4
  40. BA39EIA tool barrier, tool holder mounting position
  41. BA39-BA41EIA tool barrier Holder dimensions
  42. BA40EIA tool barrier, tool holder width X
  43. BA41EIA tool barrier, tool holder width Z
  44. BA42Barrier type
  45. BA43First tool number (in the 1st set of tools)
  46. BA44Number of tools (in the 1st set of tools)
  47. BA45First tool number (in the 2nd set of tools)
  48. BA46Number of tools (in the 2nd set of tools)
  49. BA47Turret type
  50. BA48Axis name of the head to be rotated
  51. BA49Axis number of the inclined axis
  52. BA50Fundamental axis number
  53. BA51Inclined-axis control, vector of virtual Y
  54. BA52Inclined-axis control, vector of real X
  55. BA53Inclined-axis control, vector of real Y
  56. BA54Selection of work spindle for hobbing
  57. BA55Turning spindle number for polygonal machining (D1)
  58. BA56Turning spindle number for polygonal machining (D2)
  59. BA57Turning spindle number for polygonal machining (D3)
  60. BA58Turning spindle number for polygonal machining (D4)
  61. BA59Spindle forward rotation M-code for tapping cycle
  62. BA60Spindle reverse rotation M-code for tapping cycle
  63. BA61Amount of runout of the B-axis center
  64. BA62Amount of offset for the B-axis — spindle distance
  65. BA63Holder angle of angle tool holder
  66. BA64B-axis tool reference position X
  67. BA65B-axis tool reference position Z
  68. BA66Deceleration area Z
  69. BA67Measuring area Z
  70. BA68Deceleration area X
  71. BA69Measuring area X
  72. BA70Distance between the reference points on both turrets
  73. BA71System number to be used when argument L is omitted from G112
  74. BA72Feed override for retracting the tap
  75. BA73Barrier valid/invalid 1 (chuck, sub-chuck, tailstock)
  76. BA74Barrier valid/invalid 2 (Lower turret, steady rest)
  77. BA75-BA78Barrier setup turret reference position
  78. BA79-BA82Barrier setup chuck reference position 1
  79. BA83-BA86Barrier setup chuck reference position 2
  80. BA87-BA90Barrier reference position for a powered tailstock
  81. BA91Distance from spindle edge to partition plate
  82. BA92Central position X when viewed from machine zero point
  83. BA93Upper/lower turret tool angle difference (HD1)
  84. BA94Upper/lower turret tool angle difference (HD2)
  85. BA95Tool nose measurement, sensor width along the X-axis
  86. BA96Tool nose measurement, sensor width along the Z-axis
  87. BA97Tool nose measurement, X-coordinate of the sensor’s reference point
  88. BA98Tool nose measurement, Y-coordinate of the sensor’s reference point
  89. BA99Tool nose measurement, Z-coordinate of the sensor’s reference point
  90. BA100Tool nose measurement, X-coordinate of the sensor’s reference point (for lower turret/HD2)
  91. BA101BA98: Y-coordinate of the sensor’s reference point BA101: Y-coordinate of the sensor’s reference point (for lower turret/HD2)
  92. BA102Tool nose measurement, Z-coordinate of the sensor’s reference point (for lower turret/HD2)
  93. BA103Tool nose measurement, sensor width along the X-axis (for lower turret/HD2)
  94. BA104Tool nose measurement, sensor width along the Z-axis (for lower turret/HD2)
  95. BA105Adjustment “FdT” for servo axis thrust hold
  96. BA106Dead zone
  97. BA107Filter
  98. BA108Servo axis thrust hold droop
  99. BA109Offset amount (X) during automatic tool setting value calculation
  100. BA110Offset amount (Z) during automatic tool setting value calculation
  101. BA111Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code (M881)
  102. BA111-BA116Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code command BA111: For M881 command BA112: For M882 command BA113: For M883 command BA114: For M884 command BA115: For M885 command BA116: For M886 command
  103. BA112Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code (M882)
  104. BA113Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code (M883)
  105. BA114Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code (M884)
  106. BA115Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code (M885)
  107. BA116Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code (M886)
  108. BA117Outside diameter of the turret for Virtual Machining
  109. BA118Width of the turret for Virtual Machining
  110. BA119Selecting a head having a lower-turret TOOL EYE
  111. BA120Mounting position X for an assembly tool model
  112. BA121Mounting position Z for an assembly tool model
  113. BA122Turret reference position X (for VIRTUAL MACHINING or 3D MONITOR display)
  114. BA123Turret reference position Z (for VIRTUAL MACHINING or 3D MONITOR display)
  115. BA124Fixed value (0)
  116. BA125EIA barrier activation7 BITS
  117. BA126BARRIER bit settings (8 bits)8 BITS
  118. BA127BARRIER bit settings (8 bits)8 BITS
  119. BA128BARRIER bit settings (8 bits)8 BITS
  120. BA129BARRIER bit settings (7 bits)7 BITS
  121. BA130BARRIER bit settings (1 bit)1 BITS
  122. BA131BARRIER bit settings (4 bits)4 BITS
  123. BA241Hobbing (position controlled hobbing) Hobbing axis allocation

CALL MACRO (J) · 105

  1. J1-J40G-code macroprogram call
  2. J1J29 J33 100009590 100009599100009401 J9 J13 J17 J21 J25 (Fixed (Fixed value) value) J30 J34 136 137 J10 J14 J18 J22 J26 (Fixed (Fixed value) value) J31 J35 1 1 J11 J15 J19 J23 J27 (Fixed (Fixed value) value) J12 J16 J20 J24 J28 J32 J36
  3. J2J29 J33 100009590 100009599100009401 J9 J13 J17 J21 J25 (Fixed (Fixed value) value) J30 J34 136 137 J10 J14 J18 J22 J26 (Fixed (Fixed value) value) J31 J35 1 1 J11 J15 J19 J23 J27 (Fixed (Fixed value) value) J12 J16 J20 J24 J28 J32 J36
  4. J3J29 J33 100009590 100009599100009401 J9 J13 J17 J21 J25 (Fixed (Fixed value) value) J30 J34 136 137 J10 J14 J18 J22 J26 (Fixed (Fixed value) value) J31 J35 1 1 J11 J15 J19 J23 J27 (Fixed (Fixed value) value) J12 J16 J20 J24 J28 J32 J36
  5. J4J29 J33 100009590 100009599100009401 J9 J13 J17 J21 J25 (Fixed (Fixed value) value) J30 J34 136 137 J10 J14 J18 J22 J26 (Fixed (Fixed value) value) J31 J35 1 1 J11 J15 J19 J23 J27 (Fixed (Fixed value) value) J12 J16 J20 J24 J28 J32 J36
  6. J5J29 J33 100009590 100009599100009401 J9 J13 J17 J21 J25 (Fixed (Fixed value) value) J30 J34 136 137 J10 J14 J18 J22 J26 (Fixed (Fixed value) value) J31 J35 1 1 J11 J15 J19 J23 J27 (Fixed (Fixed value) value) J12 J16 J20 J24 J28 J32 J36
  7. J6J29 J33 100009590 100009599100009401 J9 J13 J17 J21 J25 (Fixed (Fixed value) value) J30 J34 136 137 J10 J14 J18 J22 J26 (Fixed (Fixed value) value) J31 J35 1 1 J11 J15 J19 J23 J27 (Fixed (Fixed value) value) J12 J16 J20 J24 J28 J32 J36
  8. J7J29 J33 100009590 100009599100009401 J9 J13 J17 J21 J25 (Fixed (Fixed value) value) J30 J34 136 137 J10 J14 J18 J22 J26 (Fixed (Fixed value) value) J31 J35 1 1 J11 J15 J19 J23 J27 (Fixed (Fixed value) value) J12 J16 J20 J24 J28 J32 J36
  9. J8J29 J33 100009590 100009599100009401 J9 J13 J17 J21 J25 (Fixed (Fixed value) value) J30 J34 136 137 J10 J14 J18 J22 J26 (Fixed (Fixed value) value) J31 J35 1 1 J11 J15 J19 J23 J27 (Fixed (Fixed value) value) J12 J16 J20 J24 J28 J32 J36
  10. J41-J80M-code macroprogram call (J44, J48, J52, J56, J60: Parameter for system internal setting Setting prohibited)
  11. J41J45 J49 J53 J57 100000091 100000092 100000093 100000001 (Fixed value) (Fixed value) (Fixed value) (Fixed J46 J50 J54 J58 91 92 93 153 (Fixed value) (Fixed value) (Fixed value) (Fixed J47 J51 J55 J59 0 0 0 (Fixed value) (Fixed value) (Fixed value) (Fixed J48 J52 J56 J60 0 0 0 (Fixed value) (Fixed value) (Fixed value) (Fixed
  12. J42J45 J49 J53 J57 100000091 100000092 100000093 100000001 (Fixed value) (Fixed value) (Fixed value) (Fixed J46 J50 J54 J58 91 92 93 153 (Fixed value) (Fixed value) (Fixed value) (Fixed J47 J51 J55 J59 0 0 0 (Fixed value) (Fixed value) (Fixed value) (Fixed J48 J52 J56 J60 0 0 0 (Fixed value) (Fixed value) (Fixed value) (Fixed
  13. J43J45 J49 J53 J57 100000091 100000092 100000093 100000001 (Fixed value) (Fixed value) (Fixed value) (Fixed J46 J50 J54 J58 91 92 93 153 (Fixed value) (Fixed value) (Fixed value) (Fixed J47 J51 J55 J59 0 0 0 (Fixed value) (Fixed value) (Fixed value) (Fixed J48 J52 J56 J60 0 0 0 (Fixed value) (Fixed value) (Fixed value) (Fixed
  14. J44J45 J49 J53 J57 100000091 100000092 100000093 100000001 (Fixed value) (Fixed value) (Fixed value) (Fixed J46 J50 J54 J58 91 92 93 153 (Fixed value) (Fixed value) (Fixed value) (Fixed J47 J51 J55 J59 0 0 0 (Fixed value) (Fixed value) (Fixed value) (Fixed J48 J52 J56 J60 0 0 0 (Fixed value) (Fixed value) (Fixed value) (Fixed
  15. J61J65 J69 J73 J77 J66 J70 J74 J78 J67 J71 J75 J79 J68 J72 J76 J80
  16. J62J65 J69 J73 J77 J66 J70 J74 J78 J67 J71 J75 J79 J68 J72 J76 J80
  17. J63J65 J69 J73 J77 J66 J70 J74 J78 J67 J71 J75 J79 J68 J72 J76 J80
  18. J64J65 J69 J73 J77 J66 J70 J74 J78 J67 J71 J75 J79 J68 J72 J76 J80
  19. J89-J107Parameter for system internal setting Setting prohibited
  20. J108Maximum number of retrials to update the model with the SAFETY SHIELD function
  21. J109-J112Barrier setup chuck reference position 1 on the No. 2 spindle side/NC tailstock position
  22. J113-J116Barrier setup chuck reference position 2 on the No. 2 spindle side
  23. J119-J120Barrier-setting/cancelling M-code to be used for barrier teaching
  24. J119Barrier-setting/cancelling M-code to be used for barrier teaching
  25. J120Barrier-setting/cancelling M-code to be used for barrier teaching
  26. J121Amount of offset for height axis rotational center offset (K124, K128) of the rotary axis for the tool (tool tip point control)
  27. J124M codes for SPRINT control [Option]
  28. J125-J126SPRINT control enable signal ON/OFF delay time [Option]
  29. J125SPRINT control enable signal ON/OFF delay time [Option]
  30. J126SPRINT control enable signal ON/OFF delay time [Option]
  31. J127SPRINT control start signal assigned device [Option]
  32. J128SPRINT control select signal assigned device [Option]
  33. J130Z-axis stroke for the teaching of lower turret tool
  34. J131-J140Setting the M-code for making the INTELLIGENT SAFETY SHIELD function valid/invalid during automatic operation
  35. J141Selecting whether to output the M-code for making the INTELLIGENT SAFETY SHIELD function valid/invalid during automatic operation
  36. J142CALL MACRO bit settings (4 bits)4 BITS
  37. J143CALL MACRO bit settings (7 bits)7 BITS
  38. J144CALL MACRO bit settings (2 bits)2 BITS
  39. J145-J184M-code macroprogram call
  40. J145J153 J157 J161 J165 J169 J173 J177 J154 J158 J162 J166 J170 J174 J178 J155 J159 J163 J167 J171 J175 J179 J156 J160 J164 J168 J172 J176 J180
  41. J146J153 J157 J161 J165 J169 J173 J177 J154 J158 J162 J166 J170 J174 J178 J155 J159 J163 J167 J171 J175 J179 J156 J160 J164 J168 J172 J176 J180
  42. J147J153 J157 J161 J165 J169 J173 J177 J154 J158 J162 J166 J170 J174 J178 J155 J159 J163 J167 J171 J175 J179 J156 J160 J164 J168 J172 J176 J180
  43. J148J153 J157 J161 J165 J169 J173 J177 J154 J158 J162 J166 J170 J174 J178 J155 J159 J163 J167 J171 J175 J179 J156 J160 J164 J168 J172 J176 J180
  44. J149J153 J157 J161 J165 J169 J173 J177 J154 J158 J162 J166 J170 J174 J178 J155 J159 J163 J167 J171 J175 J179 J156 J160 J164 J168 J172 J176 J180
  45. J150J153 J157 J161 J165 J169 J173 J177 J154 J158 J162 J166 J170 J174 J178 J155 J159 J163 J167 J171 J175 J179 J156 J160 J164 J168 J172 J176 J180
  46. J151J153 J157 J161 J165 J169 J173 J177 J154 J158 J162 J166 J170 J174 J178 J155 J159 J163 J167 J171 J175 J179 J156 J160 J164 J168 J172 J176 J180
  47. J152J153 J157 J161 J165 J169 J173 J177 J154 J158 J162 J166 J170 J174 J178 J155 J159 J163 J167 J171 J175 J179 J156 J160 J164 J168 J172 J176 J180
  48. J235Workpiece measurement offset (X-axis offset for OD (both sides), X-axis offset for protrusion width)
  49. J236Workpiece measurement offset (Y-axis offset for OD (both sides), Y-axis offset for protrusion width)
  50. J237Workpiece measurement offset (X-axis offset for ID (both sides), X-axis offset for groove width)
  51. J238Workpiece measurement offset (Y-axis offset for ID (both sides), Y-axis offset for groove width)
  52. J239Workpiece measurement offset (Z-axis offset for protrusion width, offset for ID protrusion width)
  53. J240Workpiece measurement offset (Z-axis offset for groove width, offset for ID groove)
  54. J251Software limit relative position check – Limit distance in the separating direction (1st set of axes)
  55. J252Software limit relative position check – Limit distance in the separating direction (2nd set of axes)
  56. J253Software limit relative position check – Limit distance in the separating direction (3rd set of axes)
  57. J254Software limit relative position check – Limit distance in the separating direction (4th set of axes)
  58. J261CALL MACRO bit settings (3 bits)3 BITS
  59. J265-J424G-code macroprogram call
  60. J265J273 J277 J281 J285 J289 J293 J274 J278 J282 J286 J290 J294 J275 J279 J283 J287 J291 J295 J276 J280 J284 J288 J292 J296
  61. J266J273 J277 J281 J285 J289 J293 J274 J278 J282 J286 J290 J294 J275 J279 J283 J287 J291 J295 J276 J280 J284 J288 J292 J296
  62. J267J273 J277 J281 J285 J289 J293 J274 J278 J282 J286 J290 J294 J275 J279 J283 J287 J291 J295 J276 J280 J284 J288 J292 J296
  63. J268J273 J277 J281 J285 J289 J293 J274 J278 J282 J286 J290 J294 J275 J279 J283 J287 J291 J295 J276 J280 J284 J288 J292 J296
  64. J269J273 J277 J281 J285 J289 J293 J274 J278 J282 J286 J290 J294 J275 J279 J283 J287 J291 J295 J276 J280 J284 J288 J292 J296
  65. J270J273 J277 J281 J285 J289 J293 J274 J278 J282 J286 J290 J294 J275 J279 J283 J287 J291 J295 J276 J280 J284 J288 J292 J296
  66. J271J273 J277 J281 J285 J289 J293 J274 J278 J282 J286 J290 J294 J275 J279 J283 J287 J291 J295 J276 J280 J284 J288 J292 J296
  67. J272J273 J277 J281 J285 J289 J293 J274 J278 J282 J286 J290 J294 J275 J279 J283 J287 J291 J295 J276 J280 J284 J288 J292 J296
  68. J345J353 J357 J361 J365 J369 J373 J354 J358 J362 J366 J370 J374 J355 J359 J363 J367 J371 J375 J356 J360 J364 J368 J372 J376
  69. J346J353 J357 J361 J365 J369 J373 J354 J358 J362 J366 J370 J374 J355 J359 J363 J367 J371 J375 J356 J360 J364 J368 J372 J376
  70. J347J353 J357 J361 J365 J369 J373 J354 J358 J362 J366 J370 J374 J355 J359 J363 J367 J371 J375 J356 J360 J364 J368 J372 J376
  71. J348J353 J357 J361 J365 J369 J373 J354 J358 J362 J366 J370 J374 J355 J359 J363 J367 J371 J375 J356 J360 J364 J368 J372 J376
  72. J349J353 J357 J361 J365 J369 J373 J354 J358 J362 J366 J370 J374 J355 J359 J363 J367 J371 J375 J356 J360 J364 J368 J372 J376
  73. J350J353 J357 J361 J365 J369 J373 J354 J358 J362 J366 J370 J374 J355 J359 J363 J367 J371 J375 J356 J360 J364 J368 J372 J376
  74. J351J353 J357 J361 J365 J369 J373 J354 J358 J362 J366 J370 J374 J355 J359 J363 J367 J371 J375 J356 J360 J364 J368 J372 J376
  75. J352J353 J357 J361 J365 J369 J373 J354 J358 J362 J366 J370 J374 J355 J359 J363 J367 J371 J375 J356 J360 J364 J368 J372 J376
  76. J385J393 J397 J401 J405 J409 J413 J394 J398 J402 J406 J410 J414 J395 J399 J403 J407 J411 J415 J396 J400 J404 J408 J412 J416
  77. J386J393 J397 J401 J405 J409 J413 J394 J398 J402 J406 J410 J414 J395 J399 J403 J407 J411 J415 J396 J400 J404 J408 J412 J416
  78. J387J393 J397 J401 J405 J409 J413 J394 J398 J402 J406 J410 J414 J395 J399 J403 J407 J411 J415 J396 J400 J404 J408 J412 J416
  79. J388J393 J397 J401 J405 J409 J413 J394 J398 J402 J406 J410 J414 J395 J399 J403 J407 J411 J415 J396 J400 J404 J408 J412 J416
  80. J389J393 J397 J401 J405 J409 J413 J394 J398 J402 J406 J410 J414 J395 J399 J403 J407 J411 J415 J396 J400 J404 J408 J412 J416
  81. J390J393 J397 J401 J405 J409 J413 J394 J398 J402 J406 J410 J414 J395 J399 J403 J407 J411 J415 J396 J400 J404 J408 J412 J416
  82. J391J393 J397 J401 J405 J409 J413 J394 J398 J402 J406 J410 J414 J395 J399 J403 J407 J411 J415 J396 J400 J404 J408 J412 J416
  83. J392J393 J397 J401 J405 J409 J413 J394 J398 J402 J406 J410 J414 J395 J399 J403 J407 J411 J415 J396 J400 J404 J408 J412 J416
  84. J433-J472G-code macroprogram call
  85. J433No .2 No. 3 No. 4 No. J441 J445 J449 J453 J457 J461 J442 J446 J450 J454 J458 J462 J443 J447 J451 J455 J459 J463 J444 J448 J452 J456 J460 J464
  86. J434No .2 No. 3 No. 4 No. J441 J445 J449 J453 J457 J461 J442 J446 J450 J454 J458 J462 J443 J447 J451 J455 J459 J463 J444 J448 J452 J456 J460 J464
  87. J435No .2 No. 3 No. 4 No. J441 J445 J449 J453 J457 J461 J442 J446 J450 J454 J458 J462 J443 J447 J451 J455 J459 J463 J444 J448 J452 J456 J460 J464
  88. J436No .2 No. 3 No. 4 No. J441 J445 J449 J453 J457 J461 J442 J446 J450 J454 J458 J462 J443 J447 J451 J455 J459 J463 J444 J448 J452 J456 J460 J464
  89. J437No .2 No. 3 No. 4 No. J441 J445 J449 J453 J457 J461 J442 J446 J450 J454 J458 J462 J443 J447 J451 J455 J459 J463 J444 J448 J452 J456 J460 J464
  90. J438No .2 No. 3 No. 4 No. J441 J445 J449 J453 J457 J461 J442 J446 J450 J454 J458 J462 J443 J447 J451 J455 J459 J463 J444 J448 J452 J456 J460 J464
  91. J439No .2 No. 3 No. 4 No. J441 J445 J449 J453 J457 J461 J442 J446 J450 J454 J458 J462 J443 J447 J451 J455 J459 J463 J444 J448 J452 J456 J460 J464
  92. J440No .2 No. 3 No. 4 No. J441 J445 J449 J453 J457 J461 J442 J446 J450 J454 J458 J462 J443 J447 J451 J455 J459 J463 J444 J448 J452 J456 J460 J464
  93. J473-J512M-code macroprogram call
  94. J473J481 J485 J489 J493 J497 J501 J505 J482 J486 J490 J494 J498 J502 J506 J483 J487 J491 J495 J499 J503 J507 J484 J488 J492 J496 J500 J504 J508
  95. J474J481 J485 J489 J493 J497 J501 J505 J482 J486 J490 J494 J498 J502 J506 J483 J487 J491 J495 J499 J503 J507 J484 J488 J492 J496 J500 J504 J508
  96. J475J481 J485 J489 J493 J497 J501 J505 J482 J486 J490 J494 J498 J502 J506 J483 J487 J491 J495 J499 J503 J507 J484 J488 J492 J496 J500 J504 J508
  97. J476J481 J485 J489 J493 J497 J501 J505 J482 J486 J490 J494 J498 J502 J506 J483 J487 J491 J495 J499 J503 J507 J484 J488 J492 J496 J500 J504 J508
  98. J477J481 J485 J489 J493 J497 J501 J505 J482 J486 J490 J494 J498 J502 J506 J483 J487 J491 J495 J499 J503 J507 J484 J488 J492 J496 J500 J504 J508
  99. J478J481 J485 J489 J493 J497 J501 J505 J482 J486 J490 J494 J498 J502 J506 J483 J487 J491 J495 J499 J503 J507 J484 J488 J492 J496 J500 J504 J508
  100. J479J481 J485 J489 J493 J497 J501 J505 J482 J486 J490 J494 J498 J502 J506 J483 J487 J491 J495 J499 J503 J507 J484 J488 J492 J496 J500 J504 J508
  101. J480J481 J485 J489 J493 J497 J501 J505 J482 J486 J490 J494 J498 J502 J506 J483 J487 J491 J495 J499 J503 J507 J484 J488 J492 J496 J500 J504 J508
  102. J513-J530Parameter for system internal setting Setting prohibited
  103. J531Amount of correction for height axis rotational center offset (K233, K237) of the tool control rotary axis (tool tip point control)
  104. J533-J540For setting SPRINT interface (option), fixed value
  105. J550-J551M code setting for temporarily disabling/canceling disabled status of INTELLIGENT SAFETY SHIELD function in automatic operation

FEED VEL. (M) · 46

  1. M1Rapid feed rate
  2. M2Feed rate for initial zero-point return
  3. M3Cutting feed rate limit
  4. M4Offset of machine coordinates system
  5. M5Second zero-point coordinating value
  6. M6Third zero-point coordinating value
  7. M7Fourth zero-point coordinating value
  8. M8Maximum software limit specified by manufacturer (+ direction)
  9. M9Maximum software limit specified by manufacturer (– direction)
  10. M10Command unit
  11. M11Coding of address of axis
  12. M12Coding of incremental axis
  13. M13Axis name (for display)
  14. M14Shifting distance of the watchdog-less home position
  15. M15Axis name (for axis name changing)
  16. M16Zero-point shift amount/grid shift amount
  17. M17Axis control flag8 BITS
  18. M18FEED VEL. bit settings (7 bits)7 BITS
  19. M19FEED VEL. bit settings (5 bits)5 BITS
  20. M20FEED VEL. bit settings (8 bits)8 BITS
  21. M21FEED VEL. bit settings (8 bits)8 BITS
  22. M22FEED VEL. bit settings (7 bits)7 BITS
  23. M23FEED VEL. bit settings (2 bits)2 BITS
  24. M25Illegal axis area upper limits
  25. M26Illegal axis area lower limits
  26. M27Optimum acceleration control: Target speed
  27. M29Rapid feed clamping speed 1 for superposition control
  28. M30Rapid feed clamping speed 2 for superposition control
  29. M31Cutting feed clamping speed for superposition control
  30. M32Safety speed for Safety supervisory mode 2
  31. M33Safety speed for Safety supervisory mode 3
  32. M34Safety clamping speed for Safety supervisory mode 2
  33. M35Safety clamping speed for Safety supervisory mode 3
  34. M36Speed supervisory door selection
  35. M37Safety clamping speed reduction judgment coefficient
  36. M38Interference check distances for INTELLIGENT SAFETY SHIELD, primary check distance
  37. M39Interference check distances for INTELLIGENT SAFETY SHIELD, secondary check distance
  38. M40Ram spindle stored stroke end, upper limit
  39. M41Ram spindle stored stroke end, lower limit
  40. M42Interference check distance for INTELLIGENT SAFETY SHIELD during automatic operation
  41. M45Selection of a door for signal input on the drive side (servo) in safety supervisory mode
  42. M61Fixed value
  43. M66Variable acceleration control: Cutting feed rate
  44. M67Rapid traverse rate limit in orbit machining
  45. M68Cutting feedrate limit in orbit machining
  46. M70Fixed value

MACHINE STRUCTURE (MS) · 3

  1. MS26Spindle speed fluctuation function Fluctuation cycle Initial value
  2. MS27Spindle speed fluctuation function Fluctuation amplitude Initial value
  3. MS125MACHINE STRUCTURE bit settings (1 bit)1 BITS

MEASURE (K) · 164

  1. K1Rotational radius of the C-axis
  2. K2Minimum rotational angle
  3. K3Identification number of the shaping control axis
  4. K7Unbalanced axis
  5. K8Waiting time for speed attainment ON during override variable thread cutting
  6. K10Fixed value
  7. K11Selection of language to be displayed
  8. K12Fixed value (0)
  9. K13Measurement skip feed rate (X-axis, Z-axis)
  10. K14Measurement approach speed (X-axis, Z-axis)
  11. K15Measurement skip speed (C-axis)
  12. K16Measurement approach speed (C-axis)
  13. K17Specification of measuring tolerance (lower limit) [valid only for L106 bit 6 = 1]
  14. K18Specification of measuring tolerance (upper limit) [valid only for L106 bit 6 = 1]
  15. K19Measurement stroke for workpiece measurement
  16. K20Measurement stroke for tool nose measurement
  17. K21Coefficient to determine rotation angle when retrying measurement C reference face
  18. K22Measurement retry frequency when retrying reference face C measurement
  19. K23Retry frequency for workpiece measurement
  20. K24-K28Parameter for system internal setting Setting prohibited
  21. K29Simultaneous control: Delay counter for automatic correction of synchronizing errors
  22. K30Approach speed for laser tool length measurement
  23. K30-K33K30 Approach speed for laser tool length measurement K31 Approach speed for laser tool diameter measurement K32 Pre-measuring speed for laser tool length measurement K33 Pre-measuring speed for laser tool diameter measurement
  24. K31Approach speed for laser tool diameter measurement
  25. K32Pre-measuring speed for laser tool length measurement
  26. K33Pre-measuring speed for laser tool diameter measurement
  27. K34Pre-measuring spindle speed for laser tool length measurement
  28. K35Pre-measuring spindle speed for laser tool diameter measurement
  29. K36Parameter for system internal setting Setting prohibited
  30. K37External deceleration speed
  31. K38Work number called during S-code macroprogram appointment
  32. K39Work number called during T-code macroprogram appointment
  33. K40Work number called during second auxiliary function macroprogram appointment
  34. K41G31 skipping speed
  35. K42G31.1 skipping speed
  36. K43G31.2 skipping speed
  37. K44G31.3 skipping speed
  38. K45G31.4 skipping speed
  39. K46Excessive pressing error spread (Amount of drooping)
  40. K47M-code for external workpiece measurement
  41. K48Spindle FB alarm detection method
  42. K49First number of the standby M-codes
  43. K50Total number of the standby M-codes
  44. K51M-code during workpiece measurement retry operation
  45. K52Parameter for system internal setting Setting prohibited
  46. K53Vocal output language selection
  47. K54Vocal output sound level
  48. K55Vocal output warning reference value
  49. K56Name of second auxiliary function
  50. K57Type of S-code macroprogram appointment call
  51. K58Type of T-code macroprogram appointment call
  52. K59Type of second auxiliary function macroprogram appointment call
  53. K60Fixed value (4)
  54. K61Fixed value (1)
  55. K62Fixed value (1)
  56. K63Fixed value (1)
  57. K64K64
  58. K65Fixed value (1)
  59. K66Fixed value (1)
  60. K67Fixed value (1)
  61. K68MEASURE bit settings (6 bits)6 BITS
  62. K69MEASURE bit settings (8 bits)8 BITS
  63. K70MEASURE bit settings (8 bits)8 BITS
  64. K71MEASURE bit settings (8 bits)8 BITS
  65. K72G31.4 skip conditions
  66. K73G4 skip conditions
  67. K74Emergency stop contactor cutoff time (Safety supervisory function)
  68. K75Contactor control output device 1 (Safety supervisory function)
  69. K76Contactor control output device 2 (Safety supervisory function)
  70. K77Door switch input device (Safety supervisory function)
  71. K78Number of door switches (Safety supervisory function)
  72. K79Supervisory speed filtering time during servo-off (Safety supervisory function)
  73. K80Warning reference value (Vocal output)
  74. K81Timer for machining management
  75. K82Fixed value
  76. K83Maximum amount of compensation for workpiece thermal expansion
  77. K84Maximum allowable amount of compensation for workpiece thermal expansion in each interpolating cycle
  78. K85Special linear acceleration/deceleration time constant for threading
  79. K87-K89Parameter for system internal setting Setting prohibited
  80. K90Return override during synchronous tapping
  81. K91Alternative M-code for M96
  82. K92Alternative M-code for M97
  83. K93Fixed value (2)
  84. K94MEASURE bit settings (6 bits)6 BITS
  85. K95MEASURE bit settings (8 bits)8 BITS
  86. K96MEASURE bit settings (8 bits)8 BITS
  87. K97B-axis misalignment correction, name of parallel axis
  88. K98B-axis misalignment correction, name of orthogonal axis
  89. K99Dynamic offset, name of rotational axis
  90. K100Dynamic offset, name of parallel axis
  91. K101Dynamic offset, name of orthogonal axis
  92. K102MEASURE bit settings (7 bits)7 BITS
  93. K103MEASURE bit settings (8 bits)8 BITS
  94. K104MEASURE bit settings (8 bits)8 BITS
  95. K105MEASURE bit settings (7 bits)7 BITS
  96. K106MEASURE bit settings (8 bits)8 BITS
  97. K107MEASURE bit settings (5 bits)5 BITS
  98. K108Permissible error range for synchronous control
  99. K110Judgment angle near a singular point
  100. K111Clamping speed in safety supervisory mode 3
  101. K113Machine type
  102. K114Axis number of the horizontal axis in the rectangular coordinate system
  103. K115Axis number of the vertical axis in the rectangular coordinate system
  104. K116Axis number of the height axis in the rectangular coordinate system
  105. K117Rotational direction of the rotary axis
  106. K121Axis number of the first rotary axis
  107. K122Horizontal axis rotational center offset of the first rotary axis
  108. K123Vertical axis rotational center offset of the first rotary axis
  109. K124Height axis rotational center offset of the first rotary axis
  110. K125Axis number of the second rotary axis
  111. K126Horizontal axis rotational center offset of the second rotary axis
  112. K127Vertical axis rotational center offset of the second rotary axis
  113. K128Height axis rotational center offset of the second rotary axis
  114. K129Position deviation 1 of the first rotary axis
  115. K130Position deviation 2 of the first rotary axis
  116. K131Position deviation 1 of the second rotary axis
  117. K132Position deviation 2 of the second rotary axis
  118. K133X-axis position deviation at the spindle center position
  119. K134Y-axis position deviation at the spindle center position
  120. K135Angle deviation 1 of the first rotary axis centerline
  121. K136Angle deviation 2 of the first rotary axis centerline
  122. K137Angle deviation 1 of the second rotary axis centerline
  123. K138Angle deviation 2 of the second rotary axis centerline
  124. K139X-axis angle deviation of the spindle centerline
  125. K140Y-axis angle deviation of the spindle centerline
  126. K219Coordinate measurement - plane inclination C, Skipping stroke limit
  127. K220Coordinate measurement - plane inclination C, Approach feedrate for temporary measurement
  128. K221Coordinate measurement - plane inclination C, Maximum C-axis angle variation
  129. K222Coordinate measurement - plane inclination C, Number of re-measurements
  130. K223Coordinate measurement - plane inclination C, Permissible difference for skip coordinates X
  131. K224Coordinate measurement - plane inclination C, C-axis angle shift during retry operation
  132. K225Machine type (2nd set of axes)
  133. K226Axis number of the horizontal axis in the rectangular coordinate system (2nd set of axes)
  134. K227Axis number of the vertical axis in the rectangular coordinate system (2nd set of axes)
  135. K228Axis number of the height axis in the rectangular coordinate system (2nd set of axes)
  136. K229Rotational direction of the rotary axis (2nd set of axes)
  137. K230Axis number of the first rotary axis (2nd set of axes)
  138. K231Horizontal axis rotational center offset of the first rotary axis (2nd set of axes)
  139. K232Vertical axis rotational center offset of the first rotary axis (2nd set of axes)
  140. K233Height axis rotational center offset of the first rotary axis (2nd set of axes)
  141. K234Axis number of the second rotary axis (2nd set of axes)
  142. K235Horizontal axis rotational center offset of the second rotary axis (2nd set of axes)
  143. K236Vertical axis rotational center offset of the second rotary axis (2nd set of axes)
  144. K237Height axis rotational center offset of the second rotary axis (2nd set of axes)
  145. K238Fixed value
  146. K239Fixed value
  147. K242Axis name of the spindle to be rotated in orbit machining
  148. K243M code number of the forward rotation command for orbit machining
  149. K244M code number of the reverse rotation command for orbit machining
  150. K245M code number of the rotation stop command for orbit machining
  151. K246Permissible error at involute interpolation end point
  152. K247Involute interpolation permissible acceleration
  153. K248Involute interpolation minimum feedrate
  154. K249Involute interpolation override lower limit
  155. K250Wait time before turning ON of zero-speed signal upon ending hobbing II (position controlled hobbing)
  156. K251Threshold value for singular posture in the cutting point command mode (for other than rapid feed)
  157. K252Fixed value
  158. K253Angle that sets the mill spindle tool tip in the +X-axis direction in orbit machining1 BITS
  159. K254Threshold value for singular posture in the cutting point command mode (for rapid feed)1 BITS
  160. K257MEASURE bit settings (7 bits)7 BITS
  161. K258MEASURE bit settings (5 bits)5 BITS
  162. K259MEASURE bit settings (3 bits)3 BITS
  163. K280MEASURE bit settings (5 bits)5 BITS
  164. K281MEASURE bit settings (2 bits)2 BITS

SPINDLE (SA) · 105

  1. SA1-SA8Maximum spindle speed in each speed range (range 1 to 8)
  2. SA9-SA16Constants for calculating each gear speed of the spindle (range 1 to 8)
  3. SA17-SA24Maximum spindle speed during tapping cycle (range 1 to 8)
  4. SA25-SA28Spindle speed during gear shifting (range 1 to 4)
  5. SA29Load meter reference output scaling factor (high-speed coil)
  6. SA30Load meter reference output base rotational speed (high-speed coil)
  7. SA31Load meter reference output scaling factor (low-speed coil)
  8. SA32Load meter reference output base rotational speed (low-speed coil)
  9. SA33-SA40Acceleration/deceleration time constant for the synchronous tapping (range 1 to 8)
  10. SA41Spindle orientating speed
  11. SA42Minimum spindle speed
  12. SA43Channel number for the spindle amplifier
  13. SA44Spindle amplifier rotary switch number
  14. SA45SPINDLE bit settings (7 bits)7 BITS
  15. SA46SPINDLE bit settings (8 bits)8 BITS
  16. SA47SPINDLE bit settings (7 bits)7 BITS
  17. SA48Encoder signal input destination
  18. SA49Speed attainment detection width
  19. SA50Spindle type
  20. SA51Number of gears on spindle
  21. SA52Turning spindle type
  22. SA53Spindle 1/4h (1/2h) rated torque for auto-pecking of the cutting load detection type — L coils
  23. SA54Spindle 1/4h (1/2h) rated torque for auto-pecking of the cutting load detection type — H coils
  24. SA55Spindle 1/4h (1/2h) rated torque for auto-pecking of the cutting load detection type — Spindle gear position 3
  25. SA56Spindle 1/4h (1/2h) rated torque for auto-pecking of the cutting load detection type — Spindle gear position 4
  26. SA57Spindle viscous friction coefficient “cms” for auto-pecking of the cutting load detection type — Range 1
  27. SA58Spindle viscous friction coefficient “cms” for auto-pecking of the cutting load detection type — Range 2
  28. SA59Spindle viscous friction coefficient “cms” for auto-pecking of the cutting load detection type — Range 3
  29. SA60Spindle viscous friction coefficient “cms” for auto-pecking of the cutting load detection type — Range 4
  30. SA61Spindle coulombic friction coefficient “fms” for auto-pecking of the cutting load detection type — Range 1
  31. SA62Spindle coulombic friction coefficient “fms” for auto-pecking of the cutting load detection type — Range 2
  32. SA63Spindle coulombic friction coefficient “fms” for auto-pecking of the cutting load detection type — Range 3
  33. SA64Spindle coulombic friction coefficient “fms” for auto-pecking of the cutting load detection type — Range 4
  34. SA65Cutting force calculation filter for auto-pecking of the cutting load detection type
  35. SA66Maximum permissible speed of the rotational axis for polygonal/hobbing machining
  36. SA67-SA73Rotational speed in the following spindle output diagrams: MACHINING NAVIGATION-RESULT/MACHINING NAVIGATION-PPEDICTION/Monitoring Functions/POSITION
  37. SA74-SA80Output in the following spindle output diagrams MACHINING NAVIGATION-RESULT/MACHINING NAVIGATION-PPEDICTION/Monitoring Functions/POSITION
  38. SA81Spindle limit speed selection for spindle position control time constants — Limit speed 1
  39. SA81-SA83Spindle limit speed selection for spindle position control time constants SA81: Limit speed 1 SA82: Limit speed 2 SA83: Limit speed 3
  40. SA82Spindle limit speed selection for spindle position control time constants — Limit speed 2
  41. SA83Spindle limit speed selection for spindle position control time constants — Limit speed 3
  42. SA84-SA86Spindle limit speed selection for spindle position control time constants SA81: Limit speed 1 SA82: Limit speed 2 SA83: Limit speed 3
  43. SA85Spindle position control time constants — Time constant 2
  44. SA86Spindle position control time constants — Time constant 3
  45. SA87Spindle speed operating time constant changeover revolutions 1
  46. SA88Spindle speed operating time constant changeover revolutions 2
  47. SA89Spindle speed operating time constant 1
  48. SA89-SA91Spindle speed operating time constant changeover revolutions SA87: Revolutions 1 SA88: Revolutions 2
  49. SA90Spindle speed operating time constant 2
  50. SA91Spindle speed operating time constant 3
  51. SA92Z-phase detection speed
  52. SA93Amount of synchronous tapping zero point shifting
  53. SA94Homing speed for synchronous tapping
  54. SA95Maximum revolutions in manual operation mode
  55. SA96Amount of orientation position shifting
  56. SA97Reduction ratio of the synchronous tapping time constant for high-speed synchronous tapping
  57. SA98Time constant for override variable thread cutting
  58. SA99Orientation time constant
  59. SA100- Rotational speed in the following spindle output diagrams at continuous rating: MACHINING
  60. SA100-SA106Rotational speed in the following spindle output diagrams at continuous rating:  MACHINING NAVIGATION-RESULT  MACHINING NAVIGATION-PPEDICTION  Monitoring Functions  POSITION
  61. SA106NAVIGATION-RESULT/MACHINING NAVIGATION-PPEDICTION/Monitoring Functions/POSITION
  62. SA107- Output in the following spindle output diagrams at continuous rating: MACHINING
  63. SA107-SA113Rotational speed in the following spindle output diagrams at continuous rating:  MACHINING NAVIGATION-RESULT  MACHINING NAVIGATION-PPEDICTION  Monitoring Functions  POSITION
  64. SA113NAVIGATION-RESULT/MACHINING NAVIGATION-PPEDICTION/Monitoring Functions/POSITION
  65. SA114Spindle speed supervisory mode 2 for safety supervision
  66. SA115Spindle speed supervisory mode 3 for safety supervision
  67. SA116Spindle safety clamping mode 2 for safety supervision
  68. SA117Spindle safety clamping mode 3 for safety supervision
  69. SA118Selecting the spindle door of the spindle whose speed is to be monitored
  70. SA119Deceleration judgment coefficient on safety speed clamping of the spindle to be supervised for safety
  71. SA120PLG pulse rate for spindle index gear tooth correction
  72. SA121Amount of branching [1] point correction for spindle index gear tooth
  73. SA121-SA128Amount of branching point correction for spindle index gear tooth SA121: Branching point [1] SA122: Branching point [2] SA123: Branching point [3] SA124: Branching point [4] SA125: Branching point [5] SA126: Branching point [6] SA127: Branching point [7] SA128: Branching point [8]
  74. SA122Amount of branching [2] point correction for spindle index gear tooth
  75. SA124Amount of branching [4] point correction for spindle index gear tooth
  76. SA125Amount of branching [5] point correction for spindle index gear tooth
  77. SA126Amount of branching [6] point correction for spindle index gear tooth
  78. SA127Amount of branching [7] point correction for spindle index gear tooth
  79. SA128Amount of branching [8] point correction for spindle index gear tooth
  80. SA129#1 notch filter frequency for cutting-load detection pecking cycle
  81. SA130#1 notch filter depth for cutting-load detection pecking cycle
  82. SA131#2 notch filter frequency for cutting-load detection pecking cycle
  83. SA132#2 notch filter depth for cutting-load detection pecking cycle
  84. SA133Breakage detection torque for cutting-load detection pecking cycle
  85. SA134Maximum spindle orientation speed
  86. SA135Rotational speed change width while override variable thread cutting is valid
  87. SA136Selection of signal input door on the safety monitor drive side (spindle)
  88. SA138Number of spindle gears
  89. SA139Number of motor gears
  90. SA140Turret indexing gear ratio at the motor side (only for MULTIPLEX)
  91. SA142SPINDLE bit settings (1 bit)1 BITS
  92. SA143SPINDLE bit settings (7 bits)7 BITS
  93. SA144SPINDLE bit settings (7 bits)7 BITS
  94. SA224Hobbing II (position controlled hobbing), Spindle speed limit for time constant selection 1 for quasi constant inclination control
  95. SA225Hobbing II (position controlled hobbing), Spindle speed limit for time constant selection 2 for quasi constant inclination control
  96. SA226Hobbing II (position controlled hobbing), Spindle speed limit for time constant selection 3 for quasi constant inclination control
  97. SA227Hobbing II (position controlled hobbing), Time constant 1 for quasi constant inclination control
  98. SA228Hobbing II (position controlled hobbing), Time constant 2 for quasi constant inclination control
  99. SA229Hobbing II (position controlled hobbing), Time constant 3 for quasi constant inclination control
  100. SA231Spindle speed fluctuation function M code number for enabling the spindle speed fluctuation synchronous mode
  101. SA232Spindle speed fluctuation function M code number for disabling the spindle speed fluctuation synchronous mode
  102. SA233Spindle speed fluctuation function M code number for enabling spindle speed fluctuation
  103. SA234Spindle speed fluctuation function M code number for disabling spindle speed fluctuation
  104. SA242Fixed value
  105. SA243SPINDLE bit settings (2 bits)2 BITS

TABLE (L) · 148

  1. L1Stylus eccentricity of touch sensor (X-component)
  2. L2Stylus eccentricity of touch sensor (Y-component)
  3. L3Radius of stylus ball of touch sensor (X-component)
  4. L4Radius of stylus ball of touch sensor (Y-component)
  5. L5Z-axis stroke for tip position memory (TEACH function)
  6. L6Tool-breakage judgment distance for TBR function
  7. L7Tool-breakage restoration mode for TBR function (for M35 external tool breakage detection or tool measurement unit)
  8. L8Skipping stroke limit for MMS
  9. L9Selection of random ATC specifications
  10. L10Interval between magazine pockets
  11. L11Touch sensor’s interference direction
  12. L12Tolerance for manual measurement
  13. L13Allowable angle for parallelism and right angle in manual measurement
  14. L14Escapement for straightness measurement
  15. L15Macro program number for straightness measurement
  16. L16Parameter for system internal setting Setting prohibited
  17. L17Minimum angle of head indexing command (only for INTEGREX j)
  18. L18Presence/absence of tailstock
  19. L19Number of electric steady rests
  20. L21Output type of index (rotary) table
  21. L22Data of the tool nose measurement sensor, Sensor width along the X-axis
  22. L22-L25Data of the tool nose measurement sensor L22 : Sensor width along the X-axis L23 : Sensor width along the Z-axis L24 : X-coordinate of the sensor’s reference point L25 : Z-coordinate of the sensor’s reference point
  23. L23Data of the tool nose measurement sensor, Sensor width along the Z-axis
  24. L24Tool nose measurement sensor reference position, X-axis
  25. L25Tool nose measurement sensor reference position, Z-axis
  26. L26Tool nose measurement sensor reference position, Y-axis
  27. L27Timer setting for manual TOOL EYE measurement
  28. L28Amount of Z-axial retreat from the approach point for TOOL EYE measurement
  29. L29Machine efficiency
  30. L30Selection of machining navigation case introduction messages
  31. L31-L34Use in machine manufacturer macro
  32. L37Minimum index angle of index table
  33. L38M/B-code for index of index table
  34. L39Selection of execution/non execution of indexing unit
  35. L40Availability of specification of index table angle in end unit
  36. L41Simultaneous operation of indexing unit with ATC
  37. L42Initial value of index table angle
  38. L43Indication of index table angle
  39. L44Selection of automatic setting on/off for nose position correction of a drilling tool
  40. L45Index table angle command
  41. L46Maximum number of pallets in pallet changing unit
  42. L47To prepare or not to prepare next pallet change
  43. L48Number of long boring bars
  44. L49Simultaneous operation of pallet change with ATC
  45. L50Rewriting of head number
  46. L51Tool command system in MDI operation
  47. L52Writing of machining management data with macro variable
  48. L53Showing of program number in PALLET MANAGEMENT display
  49. L54Selection of automatic operation mode
  50. L55Spindle load meter display type
  51. L56Method of measurement of coordinates by tool edge memorizing function (TEACH)
  52. L57Rewriting of tool data during automatic operation
  53. L58Head index angle indication system
  54. L59Input selection for HEAD OFFSET display
  55. L60Head quantity
  56. L61Output timing of AHC and APC
  57. L62Head relay point X1
  58. L63Head relay point Y1
  59. L64Head relay point X2
  60. L65Head relay point Y2
  61. L66Return/No return to head indexing point Z
  62. L67Length between the end surface of the spindle and the center of head rotation
  63. L68Head correction value X
  64. L69Head correction value Y
  65. L70Axis movement from machining face on escapement
  66. L71Shift of basic coordinate for oblique face machining
  67. L725-axis spline interpolation geometry compensation software acceleration/deceleration filter 2 time constant
  68. L73Time constant for shape correction acceleration/deceleration filter 2
  69. L74Cutting feed rate for pre-interpolational acceleration/deceleration control
  70. L75Time constant for pre-interpolational linear control during cutting feed rate acceleration/deceleration
  71. L76Acceleration rate for high-speed cutting
  72. L77Angle for deceleration at corner before interpolation
  73. L78Amount of X-axial retreat from the approach point for TOOL EYE measurement
  74. L79In-position width for changeover of the synchronized-tapping gain
  75. L80Linear to arc deceleration rate
  76. L81Parameter for system internal setting Setting prohibited
  77. L82Table thickness
  78. L83Spindle head radius
  79. L84Correction value of alignment deviation X (Upper face)
  80. L85Correction value of alignment deviation Y (Upper face)
  81. L86Correction value of alignment deviation X (0-degree face)
  82. L87Correction value of alignment deviation Y (0-degree face)
  83. L88Correction value of alignment deviation X (90-degree face) Stylus eccentricity of touch sensor (X-component for B-axis at 90-degree position) (for INTEGREX series)
  84. L89Correction value of alignment deviation Y (90-degree face) Stylus eccentricity of touch sensor (Y-component for B-axis at 90-degree position) (for INTEGREX series)
  85. L90Correction value of alignment deviation X (180-degree face) Stylus eccentricity of touch sensor (X-component for B-axis at 180-degree position) (for INTEGREX series)
  86. L91Correction value of alignment deviation Y (180-degree face) Stylus eccentricity of touch sensor (Y-component for B-axis at 180-degree position) (for INTEGREX series)
  87. L92Correction value of alignment deviation X (270-degree face)
  88. L93Correction value of alignment deviation Y (270-degree face)
  89. L94X/Y travel distance during EIA-programmed tool measurement
  90. L95Offset number auto-setting for EIA-programmed tool measurement
  91. L96Amount of shifting during offset number auto-setting for EIA-programmed tool measurement
  92. L97M-code to be output when selecting menu function for the MDI tool designation
  93. L98Max. tool length for laser tool length measurement
  94. L99Cycle time for saving the operational status management data
  95. L100Laser sensor position X
  96. L100-L105L100 Laser sensor position X L101 Laser sensor position Y L102 Laser sensor position Z L103 Approach point X for laser tool diameter measurement L104 Approach point Y for laser tool diameter measurement L105 Approach point Z for laser tool length measurement
  97. L101Laser sensor position Y
  98. L102Laser sensor position Z
  99. L103Approach point X for laser tool diameter measurement
  100. L104Approach point Y for laser tool diameter measurement
  101. L105Approach point Z for laser tool diameter measurement
  102. L106TABLE bit settings (8 bits)8 BITS
  103. L107TABLE bit settings (8 bits)8 BITS
  104. L108TABLE bit settings (8 bits)8 BITS
  105. L109TABLE bit settings (8 bits)8 BITS
  106. L110TABLE bit settings (8 bits)8 BITS
  107. L111TABLE bit settings (3 bits)3 BITS
  108. L112TABLE bit settings (8 bits)8 BITS
  109. L113Software limit relative position check – Check reference axis (1st set of axes)
  110. L113-L116Software limit relative position check – Check reference axis L113 1st set of axes L114 2nd set of axes L115 3rd set of axes L116 4th set of axes
  111. L114Software limit relative position check – Check reference axis (2nd set of axes)
  112. L115Software limit relative position check – Check reference axis (3rd set of axes)
  113. L116Software limit relative position check – Check reference axis (4th set of axes)
  114. L117Software limit relative position check – Check target axis (1st set of axes)
  115. L117-L120Software limit relative position check – Check target axis L117 1st set of axes L118 2nd set of axes L119 3rd set of axes L120 4th set of axes
  116. L118Software limit relative position check – Check target axis (2nd set of axes)
  117. L119Software limit relative position check – Check target axis (3rd set of axes)
  118. L120Software limit relative position check – Check target axis (4th set of axes)
  119. L121Software limit relative position check – Limit distance in the approaching direction (1st set of axes)
  120. L121-L124Software limit relative position check – Limit distance in the approaching direction L121 1st set of axes L122 2nd set of axes L123 3rd set of axes L124 4th set of axes
  121. L122Software limit relative position check – Limit distance in the approaching direction (2nd set of axes)
  122. L123Software limit relative position check – Limit distance in the approaching direction (3rd set of axes)
  123. L124Software limit relative position check – Limit distance in the approaching direction (4th set of axes)
  124. L125Rotational axis prefiltering time constant
  125. L126Positioning direction of the head rotation - -axis for oblique plane indexing
  126. L129Acceleration/deceleration filter (1st stage), G1 time constant
  127. L130Acceleration/deceleration filter (1st stage), G0 time constant
  128. L131Acceleration/deceleration filter (2nd stage), G1 time constant
  129. L132Acceleration/deceleration filter (2nd stage), G0 time constant
  130. L133<For table tilt type (B-axis tilting table specifications)> B-axis rotation center displacement (X-axis direction)
  131. L134Tool control rotary axis offset First rotary axis vertical offset <For table tilt type (A-axis tilting table specifications)> A-axis rotation center displacement (Y-axis direction)
  132. L135<For tool tilt type> Tool control rotary axis offset First rotary axis height offset <For table tilt type> (A-(B-)axis rotation center displacement (Z-axis direction)
  133. L136<For tool tilt type> Tool rotational axis offset, horizontal axis offset amount for the 2nd rotational axis
  134. L137<For tool tilt type> Tool rotational axis offset, vertical axis offset amount for the 2nd rotational axis
  135. L138<For tool tilt type> Tool rotational axis offset, height axis offset amount for the 2nd rotational axis
  136. L139Minimum usable tool diameter of the measurable chamfering tool
  137. L140Waiting time for the completion signal of M35 (tool breakage detection) from PLC
  138. L141Software limit relative position check (for auxiliary equipment axis) – Task delay period
  139. L145Smooth corner control function: Cutting feed rate for pre-interpolational acceleration/deceleration control
  140. L146Smooth corner control function: Time constant for pre-interpolational linear control during cutting feed rate acceleration/deceleration
  141. L147Smooth corner control function: Software acceleration/deceleration filter G1 time constant (1st stage)
  142. L148Smooth corner control function: Software acceleration/deceleration filter G1 time constant (2ndt stage)
  143. L149Smooth corner control function: Rapid feed rate before interpolation for rapid feed command (involving rotary axis) during tool tip point control
  144. L150Smooth corner control function: Rapid feed time constant before interpolation for rapid feed command (involving rotary axis) during tool tip point control
  145. L151Small-diameter table thickness
  146. L171TABLE bit settings (1 bit)1 BITS
  147. L270Feedrate for clamping the acceleration in orbit machining
  148. L271Time constant for clamping the acceleration in orbit machining

TIME CONST. (N) · 40

  1. N1Rapid-feed time constant (linear acceleration/deceleration)
  2. N2Cutting-feed time constant (linear acceleration/deceleration)
  3. N3Rapid-feed time constant (First-order lag)
  4. N4Time constant for post-interpolation rapid feed acceleration/deceleration filter
  5. N5Cutting-feed time constant (First-order lag)
  6. N7OT time
  7. N8Creeping speed during initial zero-point return
  8. N9Amount of grid ignorance during initial zero-point return
  9. N10Grid spacing
  10. N12Machine dependent specific value
  11. N13Machine dependent specific value
  12. N15Machine dependent specific value
  13. N16Machine dependent specific value
  14. N17Servo amplifier channel number
  15. N18Servo amplifier rotary switch number
  16. N19Axis system number
  17. N21TIME CONST. bit settings (8 bits)8 BITS
  18. N22TIME CONST. bit settings (5 bits)5 BITS
  19. N25Time constant for deceleration rate calculation
  20. N26Accuracy coefficient for deceleration rate calculation
  21. N27Rapid feed time constant for superposition
  22. N28Cutting feed time constant for superposition
  23. N29Time constant for shape correction rapid feed acceleration/deceleration filter
  24. N30Time constant for cutting feed (for M881)
  25. N30-N35Cutting feed time constant for time constant changeover M-code command N30: for M881 command N31: for M882 command N32: for M883 command N33: for M884 command N34: for M885 command N35: for M886 command
  26. N31Time constant for cutting feed (for M882)
  27. N32Time constant for cutting feed (for M883)
  28. N33Time constant for cutting feed (for M884)
  29. N34Time constant for cutting feed (for M885)
  30. N35Time constant for cutting feed (for M886)
  31. N36Multi-turn counter increment with absolute position rotary-type rotational axis in special gear ratio
  32. N37Rotational speed after multi-turn counter increment with absolute position rotary-type rotational axis in special gear ratio
  33. N38Fixed value
  34. N57Real time tuning II Rapid feed time constant, maximum value
  35. N58Real time tuning II Minimum inertia ratio
  36. N60Real time tuning II Rapid feed time constant, minimum value
  37. N61Real time tuning II Maximum inertia ratio
  38. N63Real time tuning II Rapid feed time constant, range of change
  39. N66Variable acceleration control: Cutting feed time constant
  40. N67TIME CONST. bit settings (2 bits)2 BITS

Data I/O parameters

DNC (DNC) · 23

  1. DNC1Type of terminator
  2. DNC2Terminator code 1
  3. DNC3Terminator code 2
  4. DNC5DC code parity
  5. DNC9Number of NC transmission retries during DNC file transfer
  6. DNC10Number of NC reception retries during DNC file transfer
  7. DNC11Number of NC transmission/reception retries during DNC command message transfer
  8. DNC12@ waiting time during DNC transmission
  9. DNC13“”, TEXT waiting time during DNC transmission
  10. DNC14EOT waiting time during DNC transmission
  11. DNC15NC stop time after reception of !
  12. DNC16NC reset time after digital-out
  13. DNC17NC stop time from reception
  14. DNC18DNC command reply message waiting time
  15. DNC19DNC machine number
  16. DNC20NC transmission stop time of DNC (from reception to transmission)
  17. DNC21NC transmission stop time of DNC (from transmission to transmission)
  18. DNC25DNC bit settings (7 bits)7 BITS
  19. DNC26DNC bit settings (8 bits)8 BITS
  20. DNC27DNC bit settings (1 bit)1 BITS
  21. DNC29Number of retry times with detection of a physical error
  22. DNC30Tool data/tool file message format
  23. DNC31Waiting time for a response from the COM port driver

OTHER (IOP/DPR/IDD) · 20

  1. DPR1Baud rate
  2. DPR2Stop bit
  3. DPR4Data bit
  4. DPR8ISO code CR output and the output file size
  5. DPR9Method of handshaking
  6. DPR10DC code parity
  7. DPR11Feed section DC code output
  8. DPR12Waiting time
  9. DPR13Output format
  10. DPR14Selection of an output destination port
  11. DPR15Number of characters or the number of lines in feed section
  12. IOP2OTHER bit settings (2 bits)2 BITS
  13. IOP4OTHER bit settings (4 bits)4 BITS
  14. IOP5OTHER bit settings (4 bits)4 BITS
  15. IOP6OTHER bit settings (5 bits)5 BITS
  16. IOP7OTHER bit settings (8 bits)8 BITS
  17. IOP8OTHER bit settings (3 bits)3 BITS
  18. IOP9Fixed value (0)
  19. IOP13Mazak data library function: Connection port number
  20. IOP14MAZA-CARE function

TAPE (TAP) · 20

  1. TAP1Type of terminator
  2. TAP2Terminator code 1
  3. TAP3Terminator code 2
  4. TAP4Output of CR during ISO code punching
  5. TAP5DC code parity
  6. TAP6Feed section DC code output
  7. TAP7DSR output flow control selection
  8. TAP9“[” code for paper tape reader/puncher for EIA
  9. TAP10“]” code for paper tape reader/puncher for EIA
  10. TAP11“#” code for paper tape reader/puncher for EIA
  11. TAP12“” code for paper tape reader/puncher for EIA
  12. TAP13“=” code for paper tape reader/puncher for EIA
  13. TAP14“:” code for paper tape reader/puncher for EIA
  14. TAP15“(” code for paper tape reader/puncher for EIA
  15. TAP16“)” code for paper tape reader/puncher for EIA
  16. TAP25Paper tape puncher parity-V check
  17. TAP26TAPE bit settings (6 bits)6 BITS
  18. TAP27Bit parameter related to program end code (M) for paper tape reader
  19. TAP29Number of characters in feed section for paper tape puncher
  20. TAP30Number of characters in the space between O-number and program for paper tape puncher

CMT (CMT) · 4

  1. BAUDRATEBaud rate for RS-232C interface
  2. SAME WNo.Type of processing to be executed if the machining program of an existing work number is to be loaded
  3. PORTCMT port selection
  4. CMT1-CMT32Invalid