What is the setting range of Mazak parameter BA105?

0 to 99999999 (unit: 0.0005 mm/0.000005 in). A changed value takes effect: After stop of movement.

PARAMMachine parameter · BARRIER (BA)

BA105

Adjustment “FdT” for servo axis thrust hold

Q: What does Mazak parameter BA105 do?

BA105 is a Machine parameter in the BARRIER group of the MAZATROL SmoothX control (INTEGREX e-670H). Adjustment “FdT” for servo axis thrust hold. Set adjustment “FdT” for holding the thrust of the servo axis. Set a value less than × BA106/100. If any other value is set, the thrust may be unstable.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set adjustment “FdT” for holding the thrust of the servo axis. Set a value less than × BA106/100. If any other value is set, the thrust may be unstable.

Setting

Setting range0 to 99999999

Unit0.0005 mm/0.000005 in

Program typeM, E

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 93, 593. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →