What does Mazak parameter BA106 do?

BA106 is a Machine parameter in the BARRIER group of the MAZATROL SmoothX control (INTEGREX e-670H). Dead zone. Set the dead zone for the drooping level of the servo axis thrust. A drooping level change less than × BA106/100 is ignored.

What is the setting range of Mazak parameter BA106?

0 to 99999999 (unit: %). A changed value takes effect: After stop of movement.

‹ALARMSMazatrol Assistant

PARAMMachine parameter · BARRIER (BA)

BA106

Dead zone

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Dead zone

Set the dead zone for the drooping level of the servo axis thrust. A drooping level change less than × BA106/100 is ignored.

Setting

Setting range0 to 99999999

Unit%

Program typeM, E

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 93, 593. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →