What is the setting range of Mazak parameter BA108?

0 to 99999999 (unit: 0.00005 mm). A changed value takes effect: After stop of movement.

PARAMMachine parameter · BARRIER (BA)

BA108

Servo axis thrust hold droop

Q: What does Mazak parameter BA108 do?

BA108 is a Machine parameter in the BARRIER group of the MAZATROL SmoothX control (INTEGREX e-670H). Servo axis thrust hold droop. Set the drooping level for holding the servo axis thrust. This drooping level is held during the application of the servo axis thrust.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the drooping level for holding the servo axis thrust. This drooping level is held during the application of the servo axis thrust.

Setting

Setting range0 to 99999999

Unit0.00005 mm

Program typeM, E

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 93, 594. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →