What is the setting range of Mazak parameter BA110?

±99999999 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: Immediate.

PARAMMachine parameter · BARRIER (BA)

BA110

Offset amount (Z) during automatic tool setting value calculation

Q: What does Mazak parameter BA110 do?

BA110 is a Machine parameter in the BARRIER group of the MAZATROL SmoothX control (INTEGREX e-670H). Offset amount (X) during automatic tool setting value calculation. Specify the axis offset amount applied during automatic calculation of the tool setting value for the backface tool, which is difficult to measure using the TOOL EYE. This automatic calculation is done based on the tool setting value for the target tool measured in the opposite position. Reference workpiece SET Z of the target tool Distance to the turret center (parameter) TOOL SET X = Tool setting value X for target tool + Parameter for offset TOOL SET Z = (Parameter for distance to center of turret × (–1) × 2) – Tool setting value Z for target tool + Parameter for offset

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Offset amount (X) during automatic tool setting value calculation

Specify the axis offset amount applied during automatic calculation of the tool setting value for the backface tool, which is difficult to measure using the TOOL EYE. This automatic calculation is done based on the tool setting value for the target tool measured in the opposite position. Reference workpiece SET Z of the target tool Distance to the turret center (parameter) TOOL SET X = Tool setting value X for target tool + Parameter for offset TOOL SET Z = (Parameter for distance to center of turret × (–1) × 2) – Tool setting value Z for target tool + Parameter for offset

Setting

Setting range±99999999

Unit0.0001 mm/0.00001 in

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 93, 594. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →