What is the setting range of Mazak parameter BA111-BA116?

0 to 999999 (unit: mm/min). A changed value takes effect: After stop of movement.

PARAMMachine parameter · BARRIER (BA)

BA111-BA116

Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code command BA111: For M881 command BA112: For M882 command BA113: For M883 command BA114: For M884 command BA115: For M885 command BA116: For M886 command

Q: What does Mazak parameter BA111-BA116 do?

BA111-BA116 is a Machine parameter in the BARRIER group of the MAZATROL SmoothX control (INTEGREX e-670H). Pre-interpolation acceleration/deceleration time constant for time constant changeover M-code command BA111: For M881 command BA112: For M882 command BA113: For M883 command BA114: For M884 command BA115: For M885 command BA116: For M886 command. Set the pre-interpolation acceleration/deceleration time constant for a time constant changeover M-code command. If zero is assigned to this parameter, the pre-interpolation acceleration/deceleration time constant will not be changed, even when a time constant changeover M-code command is assigned. The pre-interpolation acceleration/deceleration time constant existing before the time constant changeover M-code command is assigned will be held.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the pre-interpolation acceleration/deceleration time constant for a time constant changeover M-code command. If zero is assigned to this parameter, the pre-interpolation acceleration/deceleration time constant will not be changed, even when a time constant changeover M-code command is assigned. The pre-interpolation acceleration/deceleration time constant existing before the time constant changeover M-code command is assigned will be held.

Setting

Setting range0 to 999999

Unitmm/min

Program typeM, E

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 594. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →