What does Mazak parameter BA126 do?

BA126 is a Machine parameter in the BARRIER group of the MAZATROL SmoothX control (INTEGREX e-670H). 8 bit settings.

What is the setting range of Mazak parameter BA126?

Binary, eight digits. A changed value takes effect: Immediate.

Which bits does Mazak parameter BA126 have?

Bit 0: System to be made valid without system selection for queuing Bit 1: Y-axis interference type Bit 2: Y-axis moving range display Bit 3: Tool command scheme Bit 4: FLASH tool valid/invalid Bit 5: Milling spindle orientation command (M219), output/no output Bit 6: System without turret Bit 7: Shape of the tailstock center for Virtual Machining, single stage/twin stage

‹ALARMSMazatrol Assistant

PARAMMachine parameter · BARRIER (BA)

BA126

BARRIER bit settings (8 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — BA126 is set bit by bit

bit 0
System to be made valid without system selection for queuing
Takes effect: Immediate
bit 1
Y-axis interference type
Takes effect: Immediate
bit 2
Y-axis moving range display
Takes effect: Immediate
bit 3
Tool command scheme
Takes effect: Immediate
bit 4
FLASH tool valid/invalid
Takes effect: Immediate
bit 5
Milling spindle orientation command (M219), output/no output
Takes effect: Immediate
bit 6
System without turret
Takes effect: Immediate
bit 7
Shape of the tailstock center for Virtual Machining, single stage/twin stage
Takes effect: Immediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 94, 598. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →