‹ALARMSMazatrol Assistant
PARAMMachine parameter · BARRIER (BA)
BA127

BARRIER bit settings (8 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
Bit settings — BA127 is set bit by bit
  1. bit 0

    M249 command for preparing for tool change before moving the tool to the tool change position using a MAZATROL program, output/no output

  2. bit 1

    For programs of Z-offset scheme: Fixed value (1) For other programs: Invalid

  3. bit 2

    Simultaneous output of TTM6M200 and TTM6M202

  4. bit 3

    NC tailstock (servo axis thrust control)

  5. bit 4

    M90/M91 output for machines with turret

  6. bit 5

    Type of the clamping and unclamping M-codes that the NC automatically output for machines equipped with a spindle head of swiveling type

  7. bit 6

    —

  8. bit 7

    Whether or not to read the current settings (tailstock position) on the SET UP MANAG. display at the beginning of the execution of each program

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 94, 598. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →