BARRIER bit settings (4 bits)

1. bit 0

   Multi-magazine number display

   Multi-magazine number indication on the POSITION display 0: Not set 1: Set

   Range 0, 1 · Takes effect: Immediate

2. bit 1

   Tool length C input, valid/invalid

   Tool length C input of MAZATROL tool data 0: Invalid 1: Valid When tool length C input is valid, WEAR COMP. Y and MAX WEAR Y can be input in the list on the TOOL DATA display. Note : This parameter is valid only with the machines equipped with tool length C.

   Range 0, 1 · Takes effect: Immediate

3. bit 5

   Switching of the approach pattern in TOOL EYE measurement (MAZATROL program)

   Switches the approach pattern for TOOL EYE measurement in MAZATROL program. 0: xtends the TOOL EYE after approach selected by the SU11 setting. 1: Executes zero-point return first, and then executes approach after extending the TOOL EYE. 1. The turret always moves to the machine zero point. 2. Extends the TOOL EYE. 3. Axes move to the approach relay point in G0 (rapid feed) mode, with axis move priority given to the Z-axis. * After the measurement with the TOOL EYE, the following operation is executed if “retract the measurement equipment” is set in the program. 4. The turret always moves to the machine zero point. 5. The TOOL EYE retracts.

   Range 0, 1 · Takes effect: After stop of movement

4. bit 7

   Fixed value (0)

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 95, 604, 605. Reference and explanation only — not a reproduction of the manual.