What is the setting range of Mazak parameter BA54?

0 to 16. A changed value takes effect: After stop of movement.

PARAMMachine parameter · BARRIER (BA)

BA54

Selection of work spindle for hobbing

Q: What does Mazak parameter BA54 do?

BA54 is a Machine parameter in the BARRIER group of the MAZATROL SmoothX control (INTEGREX e-670H). Selection of work spindle for hobbing. Set the axis number of the work spindle to be used for hobbing. The hobbing is invalid when this parameter is set to 0.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the axis number of the work spindle to be used for hobbing. The hobbing is invalid when this parameter is set to 0.

Setting

Setting range0 to 16

Unit—

Program typeE

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 91, 584. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →