What is the setting range of Mazak parameter BA57?

–1 to 3. A changed value takes effect: Immediate.

PARAMMachine parameter · BARRIER (BA)

BA57

Turning spindle number for polygonal machining (D3)

Q: What does Mazak parameter BA57 do?

BA57 is a Machine parameter in the BARRIER group of the MAZATROL SmoothX control (INTEGREX e-670H). Turning spindle number for polygonal machining (D3). Set the turning spindle to be used in the D3 command mode of polygonal machining. 0: Turning spindle No. 1 1: Turning spindle No. 2 2: Turning spindle No. 3 3: Turning spindle No. 4 –1: Invalid

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the turning spindle to be used in the D3 command mode of polygonal machining. 0: Turning spindle No. 1 1: Turning spindle No. 2 2: Turning spindle No. 3 3: Turning spindle No. 4 –1: Invalid

Setting

Setting range–1 to 3

Unit—

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 91, 585. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →